A woman pushing a red broadcast fertilizer spreader across a wide suburban lawn

What Is a Fertilizer Spreader? A Plain Guide to Types, Parts and Safe Use

A fertilizer spreader is a hopper with a gate that puts granular products on the ground, either by dropping them through a row of openings or by throwing them from a spinning plate. Fertilizer is the usual load, and the same tool can carry grass seed when the maker’s manual and the seed label allow it. In large-scale production I verified seed drill calibration on weighing trays, so I treat a spreader as a measuring tool before I treat it as a garden tool.

Below you get the parts, the main forms, real models as examples, and the label and safety steps that matter before the first fill.

What Is a Fertilizer Spreader?

In plain terms, it is a hopper, a gate and a way to place granules on the ground in a controlled flow. The hopper holds the product, the gate opens and closes the flow, and either a spinning plate throws the granules or a row of openings lets them fall. Kentucky Extension describes rotary spreaders as distributing material through centrifugal force, while drop spreaders place it straight down (1). I describe the spinning-plate form in my explainer on what a broadcast spreader is.

Stores and makers call the same family of tools a lawn spreader, a seed spreader or a broadcast spreader. What separates one from another is the form: broadcast, drop, handheld or tow-behind. I pick the form by the job and read the exact manual before the first fill.

What Goes in the Hopper

Fertilizer is the common load, and many models are sold as a fertilizer seed spreader for grass seed too. Some manuals list ice melt too, and some spreaders carry a weed and feed or other granular weed killer, which is a pesticide with its own legal label. Which product may go through which spreader is for the product’s directions and the spreader’s manual to say, and I recommend reading both side by side. I sort models for seed work by type, hopper size and budget in my grass seed spreader picks.

Ice Melt

Use ice melt or salt only when both the product’s directions and your spreader’s manual permit it. Salt-based deicers can damage metal, so follow your model’s cleaning instructions after use. Before you clean the spreader, complete the stop and make-safe steps in the safe-state box. Rinse only if the manual permits it, and dry the spreader as the manual directs. Do not use lawn fertilizer to melt ice. Keep deicing products away from children and pets.

What a Spreader Does Not Do

A spreader moves product. The label decides how much, where and when, and the maker’s setting chart gives a starting point for the gate. No tool in this family decides the amount for you, and none can make a bad product choice a good one.

The Main Parts of a Fertilizer Spreader

Every spreader is built from the same short list of parts, and the names help you read a manual. I start a new manual at its parts page, because the gate and the drive tell me more about a model than its box does.

Parts you will find on most spreaders
Part What it does Where it appears
Hopper Holds the product; the maker prints its capacity in pounds or gallons Every form
Gate (shut-off) Opens and closes the flow with a lever, a trigger or a rod Every form
Rate dial or setting scale A numbered scale that sets the size of the opening; the bag’s chart and the maker’s chart give a starting point Most push, handheld and tow-behind models
Spinner plate (impeller) Throws the granules out in a fan Broadcast, handheld and tow-behind forms
Row of openings (ports) Lets granules fall straight down Drop spreaders
Wheels and drive On a ground-driven broadcast spreader the wheels turn the plate through a gear Push and tow-behind broadcast forms
Agitator and screen Sit inside some hoppers; only the maker’s manual says whether a model has them Some models
Handle, crank or battery How you move the spreader or turn the plate Push, handheld and battery forms

The Hopper and the Gate

The hopper is simply the bin, and its printed capacity is a figure for that model, never a promise about how much lawn it covers. The gate decides when product leaves. NC State Extension tells you to make sure the lever is closed before you fill the hopper and the screen filter is in place (2). I explain materials, capacity and care in my guide to the spreader hopper.

The gate and the screen are also where the hands-on danger sits, which is why the next box comes before any advice that sends a hand toward the hopper.

Plate, Ports and Drive

On a ground-driven broadcast spreader, push or tow-behind, the wheel turns the plate through a gear. NC State Extension says that generally only one wheel drives the impeller, so spreading while you turn changes the plate speed and the pattern (2). A handheld spreader has no wheels: a hand crank or a small motor turns the plate instead. I explain the plate and how it throws granules in my guide to what a spreader impeller is.

The Safe-State Box

Every task that puts a hand, a foot or a tool near the hopper, the gate, the plate, the agitator, the gears, the wheels, the hitch or the battery starts with the same steps. I give them once, here, and every later section points back to this box.

Emergency First, for a Spreader With a Battery

If a battery becomes unusually hot, swells, hisses, gives off an unusual odor or smokes, stop using the spreader without handling or removing the battery, keep people away and follow the battery manual’s emergency instructions; if it smokes, burns or presents immediate danger, move away and call 911 or the fire department without finishing the routine steps.

Stop and Make Safe

Stop and make safe before you fill or unload the hopper, reach into the hopper, clear a clog, clean or rinse the spreader, lubricate it, adjust the gate or the pattern, change a part, hitch or unhitch it, charge or change a battery, move it, store it or leave it. Keep your hands, feet, hair and loose clothing away from the impeller, the plate, the agitator, the gears and the wheels while anything can turn. During normal spreading, walk or drive only as your manual and the product label permit; walking behind a push spreader, or pulling a tow-behind unit at the speed its manual describes, is operation, not transport.

  • Walk-behind or hand-crank spreader: close the gate, then stop walking or cranking, and wait until the impeller, plate, agitator and wheels have stopped turning.
  • Tow-behind spreader: close the gate, stop the vehicle, set the parking brake, switch the engine off and remove the key as the vehicle’s manual says, and wait until the wheels, impeller and agitator have stopped turning, before you reach into the hopper or touch the impeller.
  • Battery spreader: release the trigger or close the gate as your manual directs, switch the spreader off, wait until all moving parts have stopped, then remove the battery as the manual directs (on a model with a built-in battery that cannot be removed, follow that manual’s own off and storage steps instead, and never open the battery compartment) and keep a removed battery away from the spreader while you work. Follow any additional isolation steps in the exact manual.

Before You Fill or Clear

Keep the gate closed while you fill. Wear all the protective equipment the product label and your manual require while you fill, clean or clear a jam. Clear a clog only with the method in your exact manual. Follow every applicable safety step in your manual, in the order it specifies. Refit every guard and cover, and check that the gate opens and closes before product goes back in.

Types of Fertilizer Spreaders

The forms differ in how they move product and how you move them. Extension services describe the first two in terms of swath width and edge control, and the makers’ own words describe the rest. The forms suit different jobs, so I match the form to the job. My piece on what a push spreader is lists its parts and what each one does.

Broadcast (Rotary) Spreaders

A fertilizer broadcast spreader drops product onto a spinning plate that throws it out in a fan. NC State Extension says rotary spreaders cover more area faster than drop spreaders, need less effort to push and have better ground clearance (2). Kentucky Extension adds that they suit large areas but are less precise than drop spreaders (1).

The lawns around our house and the alleys between the orchard rows are wide, open ground, which is the kind of area this form is described for. Some models add a side deflector or edge control, and according to the maker that feature blocks one side of the throw. I explain edge guards and side controls in my guide to what a spreader deflector is.

Drop Spreaders

A drop spreader lets product fall straight down through a row of openings between the wheels. NC State Extension says drop spreaders have more uniform patterns, lower drift potential and more precise pattern edges, and it prefers them for smaller, more contained areas (2). Kentucky Extension says they reduce off-target application on beds, sidewalks and driveways (1).

The catch is width. The swath is only as wide as the hopper, so a drop spreader for lawn edges and small beds takes more passes than a broadcast form does over the same ground. I cover its parts, uses and limits in my notes on what a drop spreader is.

Handheld Spreaders, Crank and Battery

A hand held fertilizer spreader is a small hopper over a plate that a crank turns, or that a small motor turns on a battery model. In a 1979 laboratory study of hand-operated spinner spreaders, the way the spreader was carried and walked changed the pattern, in a small study of one design (3). I take that as a reason to read how the manual shows the carry, and not as a rule for any lawn.

These forms fit a small lawn, a garden bed or a patch of seed. On a battery model a motor turns the plate, and the exact model’s manual sets the rules for its battery and charger, whether it uses a rechargeable pack or disposable cells. My guide to what a handheld spreader is explains how it works and which kind to pick.

Tow-Behind Spreaders

A tow behind fertilizer spreader is a wheeled hopper pulled by a lawn tractor, a zero-turn mower or an ATV. It is ground-driven, so the plate turns only while the wheels turn, and NC State Extension says to make turns with the gate closed (4). According to Agri-Fab, the 45-0463 has a 130 lb hopper.

The vehicle’s manual and the spreader’s manual set hitching, turning, slopes, speed and load limits. Those two manuals are where every towing limit comes from. I cover its parts, hitching and safety basics in my explainer on what a tow-behind spreader is.

Commercial-Class Models

Makers also sell models they call commercial or contractor class. I read that as the maker’s description of the model, and the printed figures in its manual are what I compare. I compare what makers print for commercial and residential fertilizer spreaders in a separate article.

Examples of Each Type

Five models show how the forms differ in what the maker prints. They appear here as examples of form and not as a ranking, and each maker’s figures are in that maker’s own units and on its own basis.

Example models and what their makers print
Model Form What the maker prints
Scotts Turf Builder EdgeGuard DLX (model 76232) Broadcast push spreader A trigger gate on the handle, a rate dial on the back and an agitator inside the hopper. According to Scotts, the EdgeGuard lever blocks off the right side of the spreader pattern.
Agri-Fab 45-0462 Broadcast push spreader According to Agri-Fab, a 130 lb hopper. A control lever on the handle with a numbered gauge and an adjustable stop, and a flow plate in the bottom of the hopper.
Scotts Whirl Hand-Powered Spreader Handheld crank spreader A trigger that opens the gate while you turn the crank, a numbered dial and, according to Scotts, an adjustable arm support.
WORX WG869 20V Cordless Handheld Broadcast Spreader Battery handheld spreader The manual prints a 0.9 gallon tub, a 20 V Max lithium-ion battery and a bare tool weight of 2.27 lb. According to WORX, the kit includes a 2.0 Ah battery and a 2 A charger.
Agri-Fab 45-0463 Tow-behind broadcast spreader According to Agri-Fab, a 130 lb hopper and a universal hitch. The manual shows a flow control rod and arm that you work from the seat.

Each manual adds its own limits. Agri-Fab’s manuals for the 45-0462 and the 45-0463 say to wear eye and hand protection when handling and applying lawn or garden chemicals, and the 45-0463 manual adds substantial footwear when you operate the tractor and the spreader. Both Agri-Fab manuals advise against powdered lawn chemicals.

The 45-0463 manual says to stay off steep slopes and not to drive too close to a creek or ditch while towing. The WORX manual says to use safety glasses and a face or dust mask if the work is dusty, recommends rubber gloves and substantial footwear outdoors, forbids use in rain and in damp or wet locations, and says not to put fingers, sticks or similar objects into the spreader wheel. Complete the steps in the safe-state box before any hands-on step with these models.

Read the table for form, not for rank. The weight of the WORX is its bare tool weight, and the 130 lb figures are hopper capacity. A hopper capacity is a ceiling for that maker’s own model and not a result you will see on your lawn. Ranked lists live elsewhere: my broadcast spreader picks compare push, tow-behind and handheld models.

Why Use a Spreader Instead of Your Hands

University of California IPM says fertilizer can be scattered by hand and raked in if gloves are worn, but that this is not very efficient or accurate. Missouri Extension adds that even distribution by hand usually takes multiple passes in multiple directions. A spreader gives you a gate you can close and a known working width.

Calibration is where the measuring habit pays off. The extension pages describe it as a measurement of what the spreader actually delivers over a known area, for each product and each person, and I trust a setting only after I have seen what comes out. A spreader helps you measure, and it does not replace the measuring.

Read the Label Before You Open the Bag

The label is the first document and the spreader’s manual is the second. The two have to agree before any product goes into the hopper, and the label rules over everything the spreader’s box suggests.

Label

Read the product label before you open the bag. Follow its directions for the permitted use, the application amount, protective equipment, weather, watering in, access by people and pets, storage and disposal. Using a registered pesticide in a way its label does not allow is against federal law. Follow the spreader’s manual too. If the product’s instructions and the spreader’s instructions cannot both be followed, do not use that combination; ask the manufacturers for guidance.

No Rates Here

The product label gives the application directions, so read it before you set the gate. A setting listed for your exact spreader and product is a starting point, not proof of the amount delivered: follow the spreader’s manual and calibrate for the product, the spreader and the person using it before you apply. Never exceed the label’s application rate.

Calibration Is a Measurement

Clemson, Kentucky and NC State all describe calibration the same way: collect or weigh what the spreader delivers over a known area, and adjust the gate until it matches the label. They also say to calibrate for each product and each operator (1). I leave the numbers to the label and the manual.

Using the Gate at Stops and Turns

Close the gate before you stop, before you slow down to turn, and whenever you pause, and open it again only after you are walking or driving at the steady pace your manual describes. Do not spread while you turn. NC State Extension gives the reason: one wheel usually drives the plate (2).

For a weed and feed, a crabgrass preventer or any other granular weed killer, the label decides the equipment, the timing and who may enter the area. Wash your hands before eating, drinking, smoking or using the restroom when you work with pesticides. Change your clothes and wash your hands immediately after you apply a product that contains a pesticide, and follow the label’s additional washing and clothing instructions.

Fill, Spill and Runoff Safety

Most of the risk sits in the product and in how you handle it, not in the spreader’s plate. This section gives the protective equipment, filling, spills and runoff in the order you meet them. The full stop steps are in the safe-state box above, and every step here points back to it.

Gloves, Eyes, Children and Pets

Wear all the protective equipment the product label and your spreader’s manual require, and put it on before you open the bag. Wear it every time you fill the hopper, clean the spreader or clear a clog. Protective equipment lowers your exposure; it does not make handling a lawn product safe.

Keep children, pets and other people away from the area while you fill and spread, and keep them off the treated area for as long as the label says. Store the bag and the filled spreader where they cannot reach them.

Filling and Spills

Before you fill or unload the hopper, complete the stop and make-safe steps for your spreader in the safe-state box above, and keep the gate closed. I recommend filling on a hard surface where spilled granules can be swept up, as University of California IPM advises (5), and away from drains and water. Follow the product label’s handling and ventilation directions, fill only to the level your manual allows, and secure the hopper cover or lid if your spreader has one.

The concrete work pad beside our shed is the first place I think of when granules might land on a hard surface. Keep people and pets away from a spill. Follow the product label and its safety data sheet for collecting, reusing and disposing of spilled product, and wear the protective equipment they require. Never hose or wash granules into a street, a gutter, a drain, a ditch or water, and do not pile spilled product onto the lawn or return contaminated material to the bag.

If you cannot manage the spill safely, stay away and call the emergency number on the label. Call Poison Control (America’s Poison Centers) at 1-800-222-1222 if anyone is exposed, and call 911 for a fire or immediate danger.

Runoff, Drains and Water

Keep fertilizer off pavement and out of drains and surface water. If scattered plain fertilizer lands on a sidewalk, a driveway or a patio, sweep it back onto the lawn before you water, without going over the label rate; collect a concentrated spill instead. For pesticide granules, follow the label’s cleanup instructions.

Purdue Extension says granules left on hard surfaces can run off into surface water, and it advises a vegetative buffer strip of about 10 feet around ponds, lakes and streams (6). That figure is Purdue’s guidance and varies by state and ordinance, so follow the label and your local rules too. Drainage ditches border our land, and they are why I pay attention to a buffer.

EPA advises against fertilizing before windy or rainy days, and Purdue advises against fertilizing drought-stressed, dormant or frozen turf. Follow the product’s weather and watering directions too.

Tow-Behind, Battery and Clogs

Follow your towing vehicle’s owner’s manual and the spreader’s own manual for hitching, turning, slopes, speed and load limits, and stay within the tow capacity in the vehicle’s owner’s manual. Never ride on a spreader or carry a passenger on it. Turn only as the two manuals direct, and keep children and pets well clear of the vehicle and the spreader while you load, hitch and spread. Before you fill, hitch, unhitch, reach into the hopper or touch the impeller, complete the tow-behind steps in the safe-state box.

Use only the batteries the maker specifies for your exact spreader, and charge, store and handle them only as your manual describes. Recharge rechargeable batteries only with a charger the manual approves, and never recharge disposable cells. Before you fill the hopper, clear a jam, clean the spreader or change the battery, follow the emergency exception and the applicable stop and make-safe steps in the safe-state box. Lithium-ion batteries can overheat and catch fire (thermal runaway), so do not use a damaged battery or charger.

Never push, kick or dig product out of the gate or off the plate while anything can turn. If product clumps or bridges in the hopper or the gate clogs, stop and complete the stop and make-safe steps in the safe-state box first, then clear it only with the method in your manual. If someone swallows or is exposed to a lawn product, follow the first-aid section of the product label and call Poison Control (America’s Poison Centers) at 1-800-222-1222, and keep the product label with you. Call 911 in an emergency.

Cleaning and Storing a Spreader

A clean, dry spreader limits buildup and rust. Parish found in laboratory work that fertilizer with insoluble parts builds up on the impeller and gradually shifts the pattern of a rotary spreader (7). NC State Extension says to wash after use, dry completely and lubricate as the manual directs (2).

Cleaning

Before you clean the spreader, complete the stop and make-safe steps in the safe-state box, and wear the protective equipment the product label and your manual require. Handle leftover product, cleaning water and residues as the product label directs. Clean the spreader only by a method both the label and the manual permit, and rinse it only where they permit it, keeping product and contaminated wash water out of drains and water supplies. Dry the spreader completely, and lubricate it as its manual directs. If you change products, follow both products’ cleaning requirements: a rinse alone does not show that all residue is gone.

Storage

Before you store the spreader, complete the stop and make-safe steps in the safe-state box. Store it empty, clean and dry, as your manual describes, with the gate closed. Keep products in their original labeled containers, securely closed, under the storage conditions their labels give, and away from children and pets. Lock pesticides away, apart from fertilizer, food and animal feed, and never put any product into a food or drink container. Store a battery as the battery manual describes.

University of New Hampshire Extension and Nebraska Extension both say that fertilizer left in a spreader absorbs water and the spreader rusts. That is the practical reason to empty it.

Where to Start

Three things matter before the first fill: match the form to the job, read the product label and the spreader’s manual side by side, and close the gate whenever you stop or turn. My tip is to open the manual’s parts page next to the spreader, so you see every part named before you touch one. Read the safe-state box once more. A fertilizer spreader for lawns is a hopper, a gate and a way to place granules, and the label and the manual govern every use. My fertilizer spreader picks rank push models by edge control and kit.

Frequently Asked Questions

What is a fertilizer spreader used for?

A fertilizer spreader is used to put granular fertilizer on a lawn or garden in a controlled flow from a hopper. Makers also describe uses for grass seed and, in some manuals, ice melt. The product label and the spreader’s manual decide whether a given product may go through a given spreader.

What are the types of fertilizer spreaders?

The main types of fertilizer spreaders are broadcast (rotary), drop, handheld crank, battery handheld and tow-behind. Broadcast units throw granules from a spinning plate, drop units let them fall through openings, and the other forms differ in how you carry or pull them. Pick the form by the job and read the manual for the exact model.

Is a lawn spreader the same as a fertilizer spreader?

A lawn spreader and a fertilizer spreader are usually the same tool, named for the job it does. Both hold granular product in a hopper and place it with a gate and a plate or a row of openings. What differs is the form, such as push, handheld or tow-behind.

What are the parts of a fertilizer spreader?

The parts of a fertilizer spreader are a hopper, a gate, and a spinner plate or a row of openings. Wheeled models add a wheel drive and a handle, while handheld models use a crank or a battery motor. Some models also add a rate dial, an agitator or a screen, and the manual’s parts list names each part for the exact model.

What is a lawn spreader?

A lawn spreader is a hopper with a gate that places fertilizer, grass seed or another granular product on a lawn. You can walk behind it, carry it or tow it, depending on the form. The label and the manual decide what may go in it.

References

  1. Munshaw G. Calibrating Fertilizer Spreaders for the Home Lawn. AGR-211. University of Kentucky Cooperative Extension Service; 2014.
  2. Miller G, Kerns JP, Billeisen T. Organic Lawn Care: Composting and Spreaders. AG-562. NC State Extension; 2026.
  3. Wolf DD, Smith ES. Uniformity of seed and fertilizer distribution with a hand-operated spinning spreader. Trans ASAE. 1979;22(4):761-762.
  4. Buhler W, Erickson E, Bruneau A, et al. The Calibration of Turfgrass Boom Sprayers and Spreaders. AG-628. North Carolina Cooperative Extension; 2001, reviewed 2024.
  5. UC Statewide Integrated Pest Management Program. How to apply fertilizer. In: UC Guide to Healthy Lawns. University of California Agriculture and Natural Resources; 2017.
  6. Bigelow CA, Tudor WT, Nemitz JR. Facts About Phosphorus and Lawns. AY-334. Purdue University Extension.
  7. Parish RL. The effect of relative humidity on rotary turf spreader patterns. Appl Eng Agric. 1991;7(5):541-544.

Safety Note: Read the product label and your spreader’s manual before handling product. Follow both; if their instructions cannot both be met, do not use that combination. Registered pesticide use must comply with its labeling. A listed spreader setting is a starting point; calibrate as the manual directs and never exceed the label rate. Wear all protective equipment required by the label and manual before opening the container and during filling, cleanup and jam clearing. Wash your hands before eating, drinking, smoking or using the restroom when working with pesticides. After application, change your clothes and wash your hands immediately, and follow the label’s additional washing and clothing instructions. Keep children, pets and other people away during handling and application and off treated areas for as long as the label requires. Emergency first: if a battery becomes unusually hot, swells, hisses, smells unusual or smokes, stop using the spreader without handling or removing the battery. Keep people away and follow the battery manual’s emergency instructions. If it smokes, burns or presents immediate danger, move away and call 911 or the fire department. Otherwise, complete the applicable stop and make-safe sequence before filling, unloading, reaching into the hopper, clearing a jam, cleaning, lubricating, adjusting, changing parts or batteries, hitching, unhitching, transporting, storing or leaving the spreader. Walk-behind or hand-crank: close the gate, stop walking or cranking, and wait for all moving parts to stop. Tow-behind: close the gate, stop the vehicle, set the parking brake, switch off the engine and remove the key as the vehicle manual directs, and wait for the wheels, impeller and agitator to stop before reaching into the hopper or touching the impeller. Battery spreader: release the trigger or close the gate, switch off, wait for moving parts to stop, then remove the battery as the manual directs and keep it away while working. Follow any additional isolation steps in the exact manual. Keep hands, feet, hair and loose clothing away from moving parts. Clear jams only by the manual’s method. Refit guards and covers and check the gate before refilling. With the spreader made safe and the gate closed, fill fertilizer on a hard surface where spills can be collected, away from drains and water. Follow the label’s handling and ventilation directions and the manual’s fill limit. Keep people and pets away from spills. Follow the label and safety data sheet for collection, reuse and disposal; do not spread concentrated spills onto the lawn or return contaminated product to its bag. Sweep scattered plain fertilizer from pavement onto the intended lawn before watering only without exceeding the label rate. Follow the label’s cleanup instructions for pesticide granules. Never wash product into streets, gutters, drains, ditches or water. Observe applicable buffers. EPA advises against fertilizing before windy or rainy days; Purdue advises against fertilizing drought-stressed, dormant or frozen turf. Close the gate before stopping or turning, as the manual directs. Follow both towing manuals for hitching, turning, slopes, speed and load limits; never ride on the spreader or carry passengers on it. Use only batteries specified for the model. Recharge rechargeable batteries only with a charger approved for them, as the manual directs; never recharge disposable cells. After completing the applicable shutdown, handle leftover product, cleaning water and residues according to the product label. Clean only by methods permitted by both label and manual, keeping contaminated water out of drains and water supplies. Rinse only if permitted, then dry and lubricate as directed. A rinse does not establish that all pesticide residue is gone. Use salt or ice melt only when the product directions and spreader manual permit it. Salt-based deicers can damage metal; follow the model’s cleaning instructions. Do not use lawn fertilizer to melt ice. Store the spreader empty, clean and dry as its manual directs. Keep products securely closed in their original labeled containers under their labels’ storage conditions, away from children and pets. Lock pesticides away, separate from fertilizer, food and feed; never use food or drink containers. For human exposure, follow the label’s first-aid instructions, call Poison Control at 1-800-222-1222 and keep the label available. Call 911 for immediate danger.

Scroll to Top