The Chapin 97024 is the right choice in this Chapin 8 gallon sprayer review if you want a battery-powered 8-gallon tank for a stable mount that can also run from a 12V supply. Skip it if you want a sprayer to carry on your back, or if you need a printed runtime before you buy. My plant protection training taught me to read a sprayer’s manual before its sales page, and I did that here: the pump, the wand, the two power routes and the limits Chapin prints. Below are the specs, setup, power, mounting, cleaning and the safety steps this machine needs.
Affiliate Disclosure: Garden Power Scout is a proud participant in the Amazon Services LLC Associates Program. As an Amazon Associate, we earn from qualifying purchases, at no extra cost to you.
Chapin 8 Gallon Sprayer Review and My Short Verdict
According to Chapin, the 97024 holds 8 gallons, runs on a 24V lithium-ion battery that ships with its charger, and switches to a 12V supply through a wiring harness. I recommend it for spot spraying from a fixed or stable mount when you want no cord to a vehicle on the days the battery is enough. Its 1.0 GPM diaphragm pump shuts off at up to 60 PSI as Chapin prints it, and the only way to change the pressure is the nozzle. Chapin prints no runtime and no weight, so I treat this as a sprayer you plan around, one fill at a time. My comparison of the Chapin 15 gallon sprayer with its 25 gallon sibling covers Chapin’s 12V vehicle units.
- Who it is for: the reader who sprays spots and edges from a stable mount and wants battery power or a 12V option in one 8-gallon tank.
- What it does best: carries both power routes, with the 24V battery and charger in the box.
- Main trade-off: the manual gives no runtime, no weight and no pressure-relief method, so you fill the gaps with the shutdown box and a call to Chapin.

Chapin 97024 Specs and What Is in the Box
Two rows decide the purchase: the power source, because the pump accepts only a 24V Chapin battery or a 12V supply, and the maximum pressure, which is the machine’s limit and a ceiling you do not aim for. In the box, the listing shows the tank with its pump and battery tray, the 24V battery, the charger, a hose with a shut-off wand, nozzles, filters and a red strap, and the main photo also pictures a pair of clip cables.
| Spec | Chapin 97024 |
|---|---|
| Sprayer Type | EZ Mount 8-gallon convertible tank sprayer |
| Power Source | Chapin 24V lithium-ion battery only, or a wiring harness to a 12V battery |
| Tank Capacity, Chapin’s figure | 8 gallons (30 L) |
| Pump and Pressure, Chapin’s figures | 2-chamber diaphragm pump, 1.0 GPM, shuts off at up to 60 PSI |
| Battery and Charger | 24V battery and charger in the box, amp-hours Not listed, Chapin charges its packs in 3.5 to 4 hours depending on the pack |
| Runtime | Not listed |
| Nozzle and Wand, manual parts list | 18-inch curved poly wand, 10-foot hose with shut-off kit, nozzle kit |
| Weight | Not listed |
| Warranty, manual | 1 year after purchase |
Setup and First Fill With Clean Water
Every hands-on step on this sprayer, from opening the lid to changing the battery, starts with the full shutdown, so I put the box here, once, and everything below points back to it.
Full Shutdown Box
Emergency first: if a battery becomes unusually hot, swells, hisses, gives off an unusual odor or smokes, stop using the sprayer without handling or removing the battery, keep people away and follow the battery manual’s emergency instructions; if it smokes, burns or presents immediate danger, move away and call 911 or the fire department without finishing the routine shutdown. Shutdown before you open the tank, fill or refill it, change or clean a nozzle, clear a clogged nozzle, clean or rinse the sprayer, adjust or repair anything, charge or change the battery, move, store or leave the sprayer. Never point the wand at yourself, another person or a pet. During normal spraying, move only as the equipment manuals and the product label permit; walking while spraying with a backpack unit, or driving a mounted boom at the spraying speed its manual describes, is operation, not transport. Never ride while operating a hand-held wand or lance. On the 24V battery: release the trigger or close the wand valve, then switch the pump off. Relieve all trapped pressure using only your exact manual’s procedure and a discharge destination consistent with the product label, without opening the tank or loosening any part beforehand unless that procedure expressly requires it, and never toward yourself, another person or an animal. Then remove the battery and keep it away from the sprayer. On the 12V supply (vehicle, cart or other mount): first stop and secure the vehicle as its manual directs. Then release the trigger, close the wand or boom valve and switch the pump off at its switch. Relieve all trapped pressure using only your exact manual’s procedure and a discharge destination consistent with the product label, without opening the tank or loosening any part beforehand unless that procedure expressly requires it, and never toward yourself, another person or an animal. Then disconnect the pump’s 12V supply at the connection your manual specifies. Reconnect it only after the work is complete, every part is secured and the pump switch is off. Wear the protective equipment the product label requires while you clean the tank, the strainer or a nozzle. Clear a clogged nozzle only with the method in your exact manual; never clear a nozzle with your mouth and never by blowing into it. Add every step your manual gives, in its order. Refit every part, close the lid and check for leaks with clean water before product goes back in.
The Chapin manual gives no pressure-relief procedure and no method for clearing a clogged nozzle, so contact Chapin for its pressure-relief procedure and get it before you open or loosen anything. The manual also asks for goggles, gloves, a long-sleeve shirt, long pants and full foot protection whenever you spray.
First Water Test
Before the first water test, complete the full shutdown in the shutdown box, then fill the tank with clean water and close the lid as your manual directs. Connect the power (install the battery or connect the 12V supply) only when you are ready to test. Run the sprayer and watch the wand, hose, fittings and tank seams for leaks without touching pressurized parts. Before you open the tank, correct a leak or add product, complete the full shutdown again. Before every use, check the tank, strainer, hose and nozzle, and fix any leak before product goes in. Follow your manual’s first-use steps.
Chapin’s manual gives no first-use water test, so I run one with clean water before any product goes near the tank. I stand a few steps back and watch the pump joints, the hose and the wand for drips, and I stop at the first sign of a leak and start over from the shutdown box.
The fill opening is the part I liked first. Chapin describes a 6-inch wide opening with a filter basket, and the manual tells you to inspect the screen inside the tank regularly. With the lid off and the battery out, a gloved hand fits the opening without scraping, and the basket sits where it catches whatever rides in with the water.
Chapin 24V Sprayer Battery, Charger and the 12V Option
Complete the full shutdown in the shutdown box above before you touch the battery. That goes for fitting, removing or charging the battery as much as for opening the tank.
Chapin says the 97024 is designed to operate with a Chapin 24V lithium-ion battery only, and that the pack goes into the tray until an audible click is heard, with the switch in the off position. The click tells me by ear that the pack is home, which matters on a sprayer where a half-seated pack is easy to miss with gloves on. Chapin also says to charge its packs only in Chapin chargers, and the Chapin sprayer battery charger is designed to charge Chapin packs in 3.5 to 4 hours, depending on the pack.
Chapin does not print the pack’s amp-hours or any runtime, so I plan a spraying session around the tank and a spare charge window, not around a promised number.
Use only the battery and charger the maker supplies or lists for your exact sprayer, and charge, store and handle the battery only as your manual describes. To change or charge a battery, first complete the full shutdown in the shutdown box, including its emergency exception, which ends with removing the battery; begin the change or the charging only after that. Lithium-ion batteries can overheat and catch fire, a hazard called thermal runaway (1), so do not use a damaged battery or charger, and follow the manual’s directions if a battery or charger gets wet. OSHA’s lithium-ion fact sheet for workplaces tells employers to follow the manufacturer’s instructions for storage, use, charging and maintenance (2).
If a battery becomes unusually hot, swells, hisses, gives off an unusual odor or smokes, stop using it without handling or removing it, keep people away and follow the battery manual’s emergency instructions; if it smokes or burns, move away and call 911 or the fire department.
Chapin’s manual adds its own limits: do not charge the pack in air below 40°F or above 105°F, do not store or use the tool and pack where the temperature may reach or exceed 105°F, do not splash or immerse them in water, and keep the charger out of rain and snow. It also says to avoid an extension cord unless it is absolutely necessary, to remove the battery and place it in the charger when the sprayer is not in use, and never to use a pack or charger that has received a sharp blow, been dropped, run over or damaged.
Running the Pump From a 12V Supply
Run the full shutdown from the shutdown box above before you wire anything. Wiring the pump is hands-on work too.
Chapin’s manual says to connect the wiring harness only to a 12V battery, because a different voltage damages the pump, and it lists a 3.0 amp in-line fuse in the harness. Before any wiring work on the pump, complete the full shutdown in the shutdown box, including its emergency exception and securing the vehicle. Wire the pump the way your sprayer’s manual says, and use the fuse the manual lists. To disconnect the supply, follow the shutdown box through securing the vehicle, stopping the pump and relieving the pressure, then disconnect it as your manual directs; reconnect it only after the work is complete, every part is secured and the pump switch is off.
The warning I take most seriously is the one about the harness itself: Chapin says a pinched or damaged harness can damage the pump or overheat, resulting in meltdown or fire. On the bench I follow the harness from the pump to the clips and look for any spot where a lid, a strap or a mounting edge could pinch it.
Pump, Wand and Nozzle in Use
The full shutdown in the shutdown box above comes before any nozzle or wand work. Swapping a wand is covered by it too.
Chapin describes the pump as a 2-chamber positive displacement diaphragm pump that is self priming, can run dry and works as a demand or bypass model, with a 1.0 GPM rating and a pressure switch that shuts the pump off at 60 PSI. It also says the pressure can only be adjusted by adjusting the nozzle. There is no pressure dial to find, so the nozzle is the only control I have, and I choose it by the label and the nozzle maker’s guidance, never by the machine’s ceiling.
A sprayer’s maximum pressure is the limit of the machine, a figure that is no setting to aim for. The product label and the nozzle’s maker decide the pressure and the nozzle for a job. Higher pressure makes more fine droplets that drift, and the nozzle you choose changes the droplet size. Kansas State Extension, writing about field and boom sprayers, says higher pressures make many more droplets under 100 microns and advises refraining from pressures above 40 to 45 psi (3), and a droplet test rig showed the effect of nozzle type, size and pressure on droplet size across 32 nozzle and pressure combinations (4).
Those were boom nozzles and field sprayers, so treat them as context and follow your label and your nozzle’s maker.
The parts list shows an 18-inch curved poly wand, a 10-foot hose with the shut-off kit and a nozzle kit, and Chapin’s own FAQ names a #18 tip as standard. The sales text for this listing gives a 15-foot hose and a 20-inch wand, so measure what is in your box before you plan where the tank will sit. I like that the wand is curved: held over a drip line or a low branch, an 18-inch wand keeps my hand well behind the nozzle, and with clean water on the ground I can look at the pattern from that standard tip before I ever add product.
The manual calls the pump self priming with a 4-foot priming capability. If the pump makes noise but delivers nothing, Chapin says to prime it with a garden hose and that this may take up to 15 minutes to create suction. Stop, run the full shutdown and inspect when the pump pulses, loses pressure, smells odd or cuts out, and resume only on the manual’s conditions.
Mounting the Chapin 97024 on Stable Surfaces
The listing title says the 97024 fits garden carts, ATVs and UTVs, while Chapin’s manual says the sprayer “has been designed to be attached to stable surfaces.” The manual gives no mounting kit, no strap rule and no vehicle load, and the parts list names no cart, rack or tow hardware, so I follow the manual’s line and treat any cart or vehicle mount as your own engineering job. My ATV spot sprayer picks cover 12V units made for a vehicle mount.
Finish the full shutdown in the shutdown box above before you move or load the sprayer. Loading and unloading are covered by it too.
Stay within the rack and tow capacity in your vehicle’s owner’s manual. Sloshing liquid shifts weight and changes how the vehicle handles: Montana State University Extension advises a spray tank with internal baffles and the lowest practical center of gravity, a boom that works as low to the ground as possible, and a rear-mounted boom or equipment that lowers the operator’s exposure. On an ATV, follow its manual and your hands-on training for body position and for the slopes it permits with a sprayer load; Montana State’s advice for ATVs on a hill is to lean your body uphill, and body position does not guarantee protection against a rollover.
In a UTV, stay properly restrained inside the vehicle and follow its manual’s slope limits.
Montana State University Extension advises not to ride and spray if you have to hold a wand or lance. Wear the helmet and other protective gear the Consumer Product Safety Commission recommends, get hands-on training from a qualified instructor, and sit only in the positions the manufacturer designed for occupants. The CPSC says never to ride with more passengers than there are seats. In a UTV, fasten the seat belts and keep every part of your body inside the vehicle as its manual directs.
The CPSC says riders younger than 16 should drive only age-appropriate youth model ATVs, never adult ATVs, and that off-road vehicles are designed for off-road terrain, not paved surfaces. Most ATVs seat one rider.
Cleaning, Draining and Storage
Do the full shutdown from the shutdown box above before you rinse, drain or store anything. Storing falls under it as well.
Clean the sprayer as soon as you can after use, because dried product is harder to remove than product still in solution. Empty the tank, rinse the tank, hose, wand and nozzle, and clean the strainers and screens, following the product label and your manual; extension guidance warns that water alone may not remove every product. Clean it away from desirable plants, wells and other water, and wash the outside. Do not pour leftover product or rinse water down a sink, a toilet or a storm drain, or onto bare ground.
Chapin’s manual says to fill the sprayer part way with water after use and run clear water through the plumbing and out through the wand, to follow the chemical maker’s disposal instructions for all wash or rinse water, and to spray for no less than 1 minute to rinse the line. The rinse runs the pump, so repeat the full shutdown in the shutdown box above, including its emergency exception, before you open the drain plug. The remaining water drains at the drain plug, and the tank stores upside down in a warm, dry location.
The manual also warns that some chemicals damage the pump valves if they soak for a long time, so flush the pump with water after every use, and it says not to store or leave solution in the tank. After the rinse I pull the drain plug and watch how the tank empties and where water pools, because pooled water is the first thing to get out before storage.
Before you store the sprayer, complete the applicable full shutdown in the shutdown box, including its emergency exception. Store pesticides in their original containers, with the label on, locked up or under the control of a person who can keep others away, and out of the reach of children. Never put a pesticide in a container used for food, drink or household products. Keep pesticides away from food, animal feed and protective equipment, and store pesticides and fertilizers apart, because they can react with each other and start a fire. Store the sprayer drained, cleaned and dry, as your manual describes, with the battery stored as the battery manual describes.
Chapin also says not to leave the sprayer in the hot sun, because heat can cause pressure build-up and possible explosion, and its winter storage step is to pump RV antifreeze through the plumbing, with no ratio printed.
Safety Before Product Goes in the Tank
The sprayer is one safety layer and the product in the tank is the other, and the label and the manual decide different things. The sections below give the steps I treat as fixed for this machine.
The Label and Your Protective Equipment
The product label is the law. It tells you what protective equipment to wear, how and where you may use the product, what weather it allows, how long to stay out of the treated area, how long to wait before you harvest, how to protect bees and other pollinators, and how to dispose of leftover product and the empty container. Using a registered pesticide in a way its label does not allow is against federal law. Your sprayer’s manual does not replace the label, and the label does not replace the manual: read the label before you open the container, and follow both.
Wear the protective clothing and equipment the product label requires, and put it on before you open the container. Wear the eye protection and gloves the label names every time you mix, load, spray, clean the tank or clear a nozzle. Cornell’s pesticide safety program also advises chemical-resistant gloves, goggles and a respirator when you handle moderately toxic products, even when the label does not call for them. Wear every respirator the label requires, of the type the label names, and follow the respirator maker’s instructions for fit, use and care.
If you follow Cornell’s advice and wear one the label does not require, or if it is unclear which respirator or filter is right, get qualified guidance on the respirator and filter before you handle the product. Protective equipment lowers your exposure; it does not make spraying safe.
A critical review of coveralls in agricultural pesticide use found that the real-world effectiveness of protective equipment may be over-estimated (5), and a systematic review of handlers found goggles and gloves were worn by fewer of them than long sleeves and long trousers (6). Those samples were agricultural handlers, not home gardeners, so read them as a reason to wear every item the label names. Chapin’s manual adds goggles, gloves, a long-sleeve shirt, long pants and full foot protection, and it forbids flammable, caustic, acidic, chlorine, bleach, petroleum-based and other corrosive solutions, and heat-, pressure- or gas-producing chemicals.
It also says some chemicals may be hazardous when used with this sprayer, so read the chemical maker’s instructions before use.
Mixing, Loading and Amounts
Complete the applicable full shutdown in the shutdown box, including its emergency exception, before you mix or load anything. The product label, not this page, gives the amount of product, the dilution and the mixing order, so read it before you mix. Do not combine products unless the mixture complies with every product’s label and its compatibility has been established through the manufacturers or a qualified pesticide specialist; nobody’s advice overrides a label prohibition.
Before you load the sprayer, complete the applicable full shutdown in the shutdown box, including its emergency exception, and wear the protective equipment the product label and your manual require for the task. Mix and load outdoors, away from other people (including children), pets and livestock, and where a spill or overflow cannot reach a well, a drain or other water. Read the label before you open the container, stand upwind, and do not eat, drink or smoke while you handle pesticides. Never use your mouth to siphon a pesticide from its container.
Keep the fill hose above the level of the liquid in the tank so the product cannot siphon back into your water supply, and never leave the sprayer unattended while you fill it. Use measuring tools kept only for pesticides, never kitchen utensils or food containers. Mix only as much as the job needs so the tank ends empty; do not store leftover mix in the sprayer for later, because it can damage the sprayer’s parts.
A Dedicated Sprayer and Container Rinsing
Illinois Extension advises a dedicated sprayer for the home orchard, one that has never been used for weed control products. Penn State and Iowa State warn that even small amounts of herbicide left in tanks, hoses, screens and fittings can harm crops, and that water alone is generally not enough to remove pesticide residue. Treat a sprayer that has held weed killer as a weed-killer sprayer, and keep a separate one for fruit trees, vegetables, ornamentals and liquid fertilizer. My picks of battery sprayers for liquid fertilizer cover lawns and gardens.
Follow the product label’s instructions for rinsing the empty container, handling the rinse water and disposing of the container, and rinse only a container the label directs you to rinse. Add rinse water to a spray mixture only when the label permits it and the mixture can take it without exceeding the permitted fill level or changing the label-directed mixture. Never reuse an empty pesticide container for any purpose. For leftover product, follow the label’s disposal steps, or call your state pesticide agency or a household hazardous waste program.
Children, Pets, Wind and Drift
Keep children, pets and other people out of the area while you mix, load and spray, and keep them off the treated area for as long as the label says. Before you spray, remove toys and take away or cover pet food and water dishes.
Drift is spray carried off target by the air, and wind speed is the factor extension sources stress most. Their figures differ and none fits every situation, and your product label may be stricter than all of them. K-State Extension suggests spraying when the wind is under 10.1 miles per hour and says there is no maximum wind speed that fits every situation. LSU AgCenter says to avoid applying when the wind is above about 10 miles per hour.
NC State says under 5 miles per hour when you calibrate with the product in the tank. Cornell gives no number and says not to take a chance by spraying in the wind. Do not spray during a temperature inversion, when cool air near the ground holds small droplets in the air, and do not assume that calm air, early morning or evening is suitable: check the actual conditions and follow every weather restriction on the product label. High temperature and low humidity make spray evaporate faster.
Do not spray just before rain. Droplets smaller than about 150 micrometers drift most easily, and higher pressure makes more of them.
If Someone Is Exposed
If someone is exposed to a pesticide, follow the first-aid section of the product label and call Poison Control (America’s Poison Centers) at 1-800-222-1222, and keep the product label with you. Call 911 in an emergency.
Who the Chapin 97024 Suits and Who Should Skip It
The 97024 suits a narrow group of readers.
- It suits you if you spray spots and edges from a stable mount and want the tank to run on its own 24V battery.
- It suits you if you might also want to run the pump from a 12V supply and are comfortable following the manual’s wiring warnings.
- It suits you if you value a wide fill opening and a manual that lists its forbidden liquids plainly.
- Skip it if you want to carry the sprayer, because it is an 8-gallon tank for a stable surface.
- Skip it if you need a printed runtime or a printed weight before you buy, because Chapin gives neither.
- Skip it if you plan to mount it on a vehicle and want a maker-approved kit, because the manual describes stable surfaces only.
Drawbacks of the Chapin 97024
These are the limits to weigh before buying, each with what it means in use.
- No printed runtime or weight. You cannot plan tanks per charge, and you cannot judge how it handles on a cart before you own it.
- Two power routes, one voltage each. The pump takes only a 24V Chapin battery or a 12V supply, and a wrong voltage damages it.
- A 60 PSI ceiling and no dial. The nozzle is the only pressure control, so the nozzle choice carries the job.
- No pressure-relief or clog-clearing method printed. You rely on the shutdown box and a call to Chapin.
- A long list of forbidden liquids. The manual rules out corrosives, bleach and petroleum-based solutions, even though the listing is written for fertilizers, pesticides and herbicides.
How the Chapin 97024 Compares With Other Sprayers
The 97024 sits between a carried battery sprayer and a pushed cart sprayer, so I compare it with one of each class and keep the comparison to figures the makers print. My Master Gardener and Chapin sprayer comparison sets the 9-gallon cart against the 8-gallon tank.
Master Gardener 9-Gallon Rechargeable Cart Sprayer
The Master Gardener cart sprayer is a pushed or pulled cart with a 9-gallon tank, a rechargeable lithium-ion pack and charger in the box, a spot gun and a broadcast nozzle. Pick it if you want a cart that moves with you; pick the Chapin if you want a tank that stays on a stable surface.
| Spec | Chapin 97024 | Master Gardener cart sprayer |
|---|---|---|
| Sprayer Type | EZ Mount convertible tank sprayer | Rechargeable cart sprayer, pushed or pulled |
| Tank Capacity | 8 gallons | 9 gallons |
| Power Source | 24V lithium-ion battery or 12V supply | Lithium-ion battery pack in a dock |
| Battery and Charger | Both in the box | Both in the box |
| Maximum Pressure | Up to 60 PSI, Chapin’s figure | Not listed |
| Warranty | 1 year after purchase | 2 years, replacement parts only |
A 4-Gallon Battery Backpack Sprayer
I recommend a 4-gallon battery backpack sprayer for someone who walks the job and wants no mount, because the tank rides on your back. Pick that class if you walk the beds and rows yourself, and pick the Chapin if the tank stays put and the wand does the walking.
Common Problems and How to Handle Them
These come from Chapin’s own troubleshooting and warnings, and every fix below starts with the full shutdown in the shutdown box above, because each one puts a hand near the pump, the hose or the battery.
- Pump runs, nothing comes out. Prime it with a garden hose; Chapin says this may take up to 15 minutes to create suction.
- Leaks at the pump head or switch. Stop, complete the full shutdown, and inspect before the sprayer goes back to work.
- Pump valves stick after a long soak. Chapin says some chemicals damage the valves if they sit untreated, so flush the pump with water after every use.
- Battery will not charge. Charge only between 40°F and 105°F in a Chapin charger, as the manual says.
- Pressure builds in the sun. Chapin says heat can cause pressure build-up, so keep the sprayer out of the hot sun.
My Final Verdict on the Chapin 97024
I recommend the Chapin 97024 to a reader who wants an 8-gallon battery tank for a stable mount, a 12V option and a battery and charger in the box. I advise against it for anyone who needs to carry the sprayer or wants a printed runtime. The manual’s limits are clear: use only the 24V Chapin battery or a 12V supply, run the full shutdown before every hands-on step, and let the label decide the product. That is where my Chapin 8 gallon sprayer review lands: a clear yes for a stable-mount battery tank with a 12V option, and a clear no for a sprayer you carry. My large yard battery sprayer picks compare seven models by tank size and battery supply.
Frequently Asked Questions
How long does it take to charge the Chapin 97024 battery?
Charging the Chapin 97024 battery takes 3.5 to 4 hours, depending on the pack being charged, according to Chapin’s manual. Use only a Chapin charger, charge between 40°F and 105°F, and complete the full shutdown in the shutdown box so the battery is out of the sprayer before it goes on the charger.
Can the Chapin 8 gallon sprayer run on a 12V vehicle battery?
After the full shutdown in the shutdown box, the Chapin 8 gallon sprayer can run from a 12V battery through its wiring harness, which Chapin says to connect only to a 12V battery. Any other voltage damages the pump, the harness carries a 3.0 amp in-line fuse, and a pinched or damaged harness can overheat, so route it with care.
What should I check if my Chapin battery sprayer is not working?
Check the battery seat, the charger and the pump’s priming first if your Chapin battery sprayer is not working, after you complete the full shutdown in the shutdown box. Chapin’s manual says a pump that makes noise but gives no output needs priming with a garden hose, which may take up to 15 minutes.
Where do I find the manual for the Chapin 8 gallon sprayer?
The manual for the Chapin 8 gallon sprayer is titled EZ Mount 8 Gallon Convertible Sprayer Use and Care Manual, model 97024, form 018892R0223. Search that exact title, and read the copy that matches your model number before the first fill, since it holds the forbidden-liquids list and the battery rules.
Is the Chapin 8 gallon sprayer worth buying?
The Chapin 8 gallon sprayer is worth buying if you want a battery-powered 8-gallon tank for a stable mount with a 12V option, since the battery and charger come in the box. It is a poor buy if you need to carry it or want a printed runtime, because Chapin prints no runtime and no weight.
References
- Wang G, Ping P, Kong D, et al. Advances and challenges in thermal runaway modeling of lithium-ion batteries. Innovation (Camb). 2024;5(4):100624.
- Occupational Safety and Health Administration. Lithium-ion Battery Safety. Fact Sheet DTSEM FS-4480. US Department of Labor; January 2025.
- Wolf RE. Strategies to Reduce Spray Drift. MF-2444. Kansas State University Agricultural Experiment Station and Cooperative Extension Service; March 2000.
- Nuyttens D, Baetens K, De Schampheleire M, Sonck B. Effect of nozzle type, size and pressure on spray droplet characteristics. Biosyst Eng. 2007;97(3):333-345.
- Garrigou A, Laurent C, Berthet A, et al. Critical review of the role of PPE in the prevention of risks related to agricultural pesticide use. Saf Sci. 2020;123:104527.
- Sapbamrer R, Thammachai A. Factors affecting use of personal protective equipment and pesticide safety practices: a systematic review. Environ Res. 2020;185:109444.
Safety Note: Read your sprayer’s manual and the product label before you open any container. The label is the law: it tells you what protective equipment to wear, how and where you may use the product, what weather it allows, how long to stay out of the treated area, how long to wait before you harvest, how to protect bees and other pollinators, and how to dispose of leftovers and the empty container. Using a registered pesticide in a way its label does not allow is against federal law. This page never gives an amount of product, a dilution or a mixing order: the label does. Wear the protective clothing and equipment the label requires, put it on before you open the container, and wear the eye protection and gloves it names whenever you mix, load, spray, clean the tank or clear a nozzle. Protective equipment lowers your exposure; it does not make spraying safe. Wear every respirator the label requires, of the type it names, and follow the respirator maker’s fit, use and care instructions. Before you clean or store the sprayer, or wire a 12V pump, complete the shutdown below first. Before you mix or load, complete the shutdown below, including its emergency exception. Mix and load outdoors, away from other people (including children), pets and livestock, and where a spill cannot reach a well, a drain or other water. Stand upwind, never use your mouth to siphon a product, keep the fill hose above the liquid so it cannot siphon back into your water supply, and never leave the sprayer unattended while you fill it. Mix only what the job needs, and do not store leftover mix in the sprayer. Never point the wand at yourself, another person or a pet, and never test a spray against your hand. Emergency first: if a battery becomes unusually hot, swells, hisses, gives off an unusual odor or smokes, stop using the sprayer without handling or removing the battery, keep people away and follow the battery manual’s emergency instructions; if it smokes, burns or presents immediate danger, move away and call 911 or the fire department without finishing the routine shutdown. Otherwise, before you open the tank, fill it, change or clean a nozzle, clear a clogged nozzle, clean or rinse the sprayer, adjust or repair anything, charge or change the battery, load, unload, transport, store or leave the sprayer, or lift, put on or take off a backpack unit, complete the shutdown. During normal spraying, move only as your manual and the product label permit, and never ride while operating a hand-held wand or lance. Battery sprayer: release the trigger or close the wand valve, then switch the pump off. Relieve all trapped pressure using only your exact manual’s procedure and a discharge destination consistent with the product label, without opening the tank or loosening any part beforehand unless that procedure expressly requires it, and never toward yourself, another person or an animal. Then remove the battery. 12V vehicle sprayer: first stop and secure the vehicle as its manual directs, then release the trigger, close the wand or boom valve and switch the pump off. Relieve all trapped pressure using only your exact manual’s procedure and a discharge destination consistent with the product label, without opening the tank or loosening any part beforehand unless that procedure expressly requires it, and never toward yourself, another person or an animal. Then disconnect the pump’s 12V supply at the connection your manual specifies, and reconnect it only after the work is complete, every part is secured and the pump switch is off. Wear the label’s protective equipment while you clean the tank, the strainer or a nozzle. Clear a clogged nozzle only with the method in your exact manual, never with your mouth and never by blowing into it. Refit every part and check for leaks with clean water before product goes back in. For the first water test, complete the shutdown first, fill the tank with clean water and close it as your manual directs, connect the power only when you are ready, and watch the wand, hose, fittings and tank seams for leaks without touching pressurized parts; complete the shutdown again before you open the tank, fix a leak or add product. Wind, heat and fine droplets carry spray off target: the label may be stricter than any extension guideline, and extension sources give different wind figures, so no single number fits every situation. Do not spray during a temperature inversion, and do not assume that calm air, early morning or evening is suitable. Do not spray just before rain. Keep children, pets and other people out of the area while you spray and off the treated area for as long as the label says, and remove toys and cover pet food and water dishes first. The label’s pollinator wording decides when you may spray around flowering plants, and early morning or evening is not automatically suitable. A sprayer that has held weed killer should stay a weed-killer sprayer: extension services advise a dedicated sprayer, and rinsing may not remove every residue. Follow the product label’s instructions for rinsing empty containers, handling rinse water and disposing of them, and never reuse an empty pesticide container; for leftover product, call your state pesticide agency or a household hazardous waste program, and never pour it down a sink, a toilet or a storm drain. Store pesticides in their original containers, locked up and out of the reach of children, away from food and animal feed, and keep pesticides and fertilizers apart. If someone is exposed, follow the first-aid section of the label, call Poison Control at 1-800-222-1222 and keep the label with you; call 911 in an emergency. If product spills, keep people and animals away and follow the label’s emergency directions; try to contain a small spill only if the label says that is safe and you have the protective equipment it requires, and otherwise get help (the emergency number on the label, Poison Control if anyone is exposed, 911 for a fire, immediate danger or a large spill). Use only the battery and charger the maker supplies or lists for your exact sprayer, charge and store the battery as your manual describes, and do not use a damaged battery or charger: lithium-ion batteries can overheat and catch fire. Wire a 12V pump the way your manual says and use the fuse it lists. On an ATV or UTV, wear the helmet and protective gear the Consumer Product Safety Commission recommends, get hands-on training, sit only in the positions the manufacturer designed, never ride with more passengers than there are seats, and in a UTV fasten the seat belts and keep every part of your body inside the vehicle; stay within the rack and tow capacity in your vehicle’s owner’s manual, and remember that sloshing liquid shifts weight and changes how the vehicle handles; Montana State University Extension advises against riding and spraying if you have to hold a wand or lance. Stop at once, complete the full shutdown and inspect if the sprayer leaks, loses pressure or runs without spraying, and restart only as the manual allows. If a battery becomes unusually hot, swells, hisses, gives off an unusual odor or smokes, do not handle or remove it: keep people away, follow the battery manual’s emergency instructions, and if it smokes or burns, move away and call 911 or the fire department. Before you fill the tank, complete the shutdown, and fill it only to the level your manual allows. Carrying a full tank is tiring: rest when you are tired.


