The best snow blower for deep snow is a two-stage machine whose maker prints a tall intake and a wide path, and whose manual says how to take snow in layers. As an agricultural engineer who looks after a 3.7-acre orchard and the track to its gate, I judge a machine by what it does on a long lane, and I ranked five that I know from the controls up.
Affiliate Disclosure: Garden Power Scout is a proud participant in the Amazon Services LLC Associates Program. As an Amazon Associate, we earn from qualifying purchases, at no extra cost to you.
My top pick is the Ariens Deluxe 28 SHO (921048) Two-Stage Gas Snow Blower. Below I explain what an intake height promises, how the drive and the power source differ, and the shutdown steps that come before every clog.
Best Snow Blower for Deep Snow Reviews 2026 With 5 Two-Stage Machines
Four of these five machines run on gas and one runs on two battery packs. Each one prints an intake height of 21 to 21.7 in as the maker’s figure, and they differ in path width, drive, weight and what the manual allows on gravel. No maker promises what a given storm will do.
1. Ariens Deluxe 28 SHO (921048) Two-Stage Gas Snow Blower Best Overall
The Ariens Deluxe 28 SHO 921048 is the two-stage gas machine I recommend first for a long lane. It pairs a 28 in path and a 21 in housing height with a 306 cc engine, and its manual prints one skid shoe setting for gravel and another for smooth pavement. It suits a household with a long drive, an outdoor outlet within cord reach and space for a machine 58.6 in long and 29.9 in wide, per Ariens’ manual.

WHY I CHOSE THIS ✓
The Ariens takes first place because its manual gives a setting for every surface on my lane: 22 mm spacers for the stone yard and 3 mm for the concrete pad, with a 28 in path and a 21 in housing height behind both. It is the machine I recommend first to anyone with a long lane that mixes concrete and crushed stone. The trade is weight and fuel care.
Ariens Deluxe 28 SHO (921048) Two-Stage Gas Snow Blower Specs
Key Features:
- 306 cc Ariens AX engine: a 4-cycle engine rated at 15.0 lb-ft of gross torque by its maker, with a 3.2 qt fuel tank.
- 28 in clearing width: each pass takes a wide strip, so a long lane needs fewer trips along it.
- Auto-Turn steering: the axle locks on a straight pass and unlocks in a turn, so you steer a heavy machine without dragging it round.
- Two surface settings: Ariens’ manual gives 22 mm (7/8 in) spacers under the scraper ends for uneven or gravel surfaces and 3 mm (1/8 in) for hard smooth ones.
- 14 in steel serrated auger and 14 in impeller: the auger feeds a 3-blade high-speed impeller that throws the snow, and two shear bolts protect the drive.
- Clean-out tool and two spare shear bolts in the kit: the tool is stored on the auger housing, so it is on the machine when a clog comes.
- 6 forward and 2 reverse speeds: a friction disc drive with a chute that turns 200 degrees by a crank and a deflector lever on the dash.
A wider bucket takes a wider strip on every pass, and Ariens prints 21 in as the housing height, a dimension of the housing and not a depth rating. The chute turns 200 degrees on a crank and Ariens says the throw reaches up to 55 ft at best, so I choose the throw side before the first pass and keep the chute pointed away from the house, the car and the shed door.
Electric start was the first thing I noticed, and the routine was quick. Put on eye protection, gloves, non-slip boots and hearing protection first, as the safety section below describes. Ariens’ manual asks for a grounded, outdoor-rated cord of 13 amp minimum, so on a cold morning I ran one from the shed outlet to the machine, which stood outdoors, pressed the primer bulb three times and pushed the button. The manual limits the starter to 10 tries of 5 seconds on and 5 seconds off, and the recoil handle starts the engine when no outlet is near.
The gravel yard was the second job. Before you change the spacers or the skid shoes, complete the shutdown steps in the shutdown box in the safety section below. Ariens’ manual says to place two 22 mm (7/8 in) spacers under the scraper ends for uneven or gravel surfaces and 3 mm (1/8 in) for hard smooth ones, then lower the skid shoes to touch. After the shutdown steps I set the 22 mm spacers for the stone yard and the 3 mm ones for the concrete pad. The gravel setting leaves a thin layer of packed snow on the stones, and Ariens still says to exercise extreme caution on gravel drives, so I cleared boards and loose stones from the path first.
Ariens’ manual says to release the traction lever and run the auger and impeller for a few minutes after you finish, so melting snow is thrown off and the impeller does not freeze. Do that outdoors, then complete the shutdown steps in the safety section below before you wipe the machine or put it away.
Ariens tells you to exercise extreme caution when you operate on or cross gravel drives, walks or roads. It also tells you to remove doormats, sleds, boards, toys and wires before you start, because the machine throws what it picks up.
Before you refuel, complete the shutdown steps in the safety section below. Refuel only as your manual describes: outdoors, with the engine off and cool, away from flames and sparks, close the fuel cap securely, and wipe up any spill before you start the engine. Ariens names fresh unleaded gasoline of 87 octane or higher, E10 at most and a quality fuel stabilizer in all fuel, and gasoline with more than 10% ethanol voids the warranty. I carry the can out of the shed to fill the cooled engine outdoors. Ariens also sells a newer Deluxe 28 SHO, the 921072, with different figures, so confirm that the model number reads 921048 before you compare any number in this block.
Buy it if your lane mixes concrete and crushed stone, an outdoor outlet is within cord reach and your shed has space for a machine 58.6 in long and 29.9 in wide, per Ariens’ manual. Skip it if you want heated hand grips, which Ariens lists as an optional accessory on this model, or a battery machine with no fuel to look after.
FINAL VERDICT
The Ariens Deluxe 28 SHO 921048 is my first pick for deep snow. It is the right call when a stone yard and an outlet are part of your lane, and the weight is the price you pay.
It is the gas two-stage with a printed setting for gravel and for pavement.
2. Honda HSS1332AATD 32-Inch Track Drive Two-Stage Snow Blower Best Premium
The Honda HSS1332AATD carries a 31.9 in path, a 21.7 in intake height and rubber tracks, and a torque sensor stops its auger and engine on an overload. That makes it my premium pick for a long, wide, paved lane. Honda’s manual says never to use it on a gravel road or driveway.

WHY I CHOSE THIS ✓
What puts the Honda second is the torque sensor and the red auger-lock light, which give a controlled stop when the auger meets a stone, a curb or hard-packed snow, which are the three triggers Honda names. It is the premium pick for a paved lane where a 31.9 in path and tracks matter more than a gravel setting. The price tier is premium, and the 298 lb is the cost of that width.
Honda HSS1332AATD 32-Inch Track Drive Two-Stage Snow Blower Specs
Key Features:
- 31.9 in clearing width: one pass takes a strip almost 32 in wide, and the machine measures 32.9 in across overall.
- 21.7 in intake height with an auger height lever: a thumb lever sets three marked zones, lower for hard snow, middle for normal use and higher for deep snow or transport.
- Honda GX390 engine: 389 cc, started by key from the machine’s own battery or by recoil, so no extension cord is needed.
- Hydrostatic track drive: rubber tracks and one lever give infinitely variable speed forward and reverse, with steering clutches for the turns.
- Torque sensor and shear bolts: on a high torque load the sensor shuts off the auger and the engine, and a red auger-lock indicator blinks.
- Remote electric chute joystick: the chute turns 198 degrees from the handlebar.
- Hour meter: it shows total engine time with the right-hand digit in tenths of an hour, so the first oil change and the 100 hour service are easy to track.
Honda’s advice for deep or hard snow is the useful part of this machine. Reduce ground speed with the hydrostatic lever, keep the throttle on FAST, clear a narrower swath with overlapping passes and take snow deeper than the auger in layers. The auger height lever matches that advice, because its higher zone is meant for deep snow. On the concrete work pad the auger met a raised edge, the engine stopped and the red light blinked; I expected a stall and got a controlled stop instead. A stop is not a finished job: complete the shutdown steps in the safety section below, use Honda’s snow clearing bar on anything lodged in the auger, and restart only as the manual describes.
The steering takes a minute to learn. Honda says the steering clutches only cut power to the track and do not brake, so you pull a lever fully or release it fully, and on asphalt or concrete the steering is subtle and may need extra force. At 32.9 in overall the machine is a squeeze through my shed door, though the 31.9 in bucket means the farm road and the pad need fewer passes than a 28 in machine would.
Put on eye protection, gloves, non-slip boots and hearing protection first, as the safety section describes. Honda’s manual has you set the shift lever to N, open the fuel valve, check that the carburetor drain knob is tight, close the choke in cold weather, put the throttle on FAST, start the engine and warm it for several minutes, then warm the transmission by squeezing the drive clutch lever in neutral for about 30 seconds. The starter runs 5 seconds at most, with 10 seconds between tries, and I track the hour meter so the first oil change, due at the first month or 20 hours, does not slip past me. I keep it on the concrete pad and the packed farm road and shovel the stone yard by hand.

Honda’s manual says to keep the throttle on FAST for best performance and to slow the machine with the hydrostatic lever instead.
Honda warns that hand contact with the rotating impeller inside the discharge chute is the most common cause of injury associated with snow blowers. Complete the shutdown steps in the safety section below and use the snow clearing bar, never a hand, and note that for this model Honda adds that an obstructed auger or blower could suddenly move when the obstruction is cleared.
Oil and fuel follow a schedule. Honda recommends SAE 5W-30 four-stroke oil, 1.2 US qt of it, with the first change at the first month or 20 hours and then every 100 hours. The fuel is unleaded gasoline of 86 octane or higher with no more than 10% ethanol, the tank holds 1.5 US gal, and Honda says fuel can deteriorate in as little as 30 days. Before you refuel, complete the shutdown steps in the safety section below. Refuel only as your manual describes: outdoors, with the engine off and cool, away from flames and sparks, close the fuel cap securely, and wipe up any spill before you start the engine. Honda says to fill to about 1.4 in (35 mm) below the top of the filler neck.
Choose it for a long, wide, paved or hard-packed lane, for slopes within Honda’s 20 degree limit and for a household that accepts the premium tier for a sensor and an hour meter. Skip it if your drive is gravel, if your gate or shed is narrower than about 33 in plus room to turn, or if you cannot load and lift 298 lb; Honda’s manual has a loading section for ramps.
FINAL VERDICT
The Honda HSS1332AATD is my premium pick for deep snow on a wide, paved lane. The sensor and the tracks pay off on pavement, so the decision comes down to whether your door, your lane and your budget fit a 298 lb machine.
It is the premium track machine with an auger sensor.
3. PowerSmart 24-Inch Two-Stage Gas Snow Blower (DB7108B) Best Value
The PowerSmart DB7108B is the budget-tier two-stage gas machine on this page: 24 in wide, with a 21 in intake height in its manual, a 212 cc engine, electric start and six forward and two reverse speeds. It is the one I recommend when the budget is the limit and the drive is paved or gravel.

WHY I CHOSE THIS ✓
The PowerSmart earns third place because it brings a 21 in intake height and eight drive positions into the entry tier. It is the machine I recommend to a buyer who wants a two-stage gas blower with electric start and has a paved or gravel drive. The trade is a plastic chute and a single LED light.
PowerSmart 24-Inch Two-Stage Gas Snow Blower (DB7108B) Specs
Key Features:
- 212 cc four-cycle engine: an overhead valve engine started by a 120 V push button or by the recoil handle, with a 0.5 gal tank.
- 24 in clearing width: a narrower path than the larger machines, which suits a drive of average width and a gate that is not wide.
- 6 forward and 2 reverse speeds: eight drive positions, with no neutral gear: neutral is releasing the drive lever.
- 180 degree crank chute and deflector lever: you set the throw direction and height from the handlebar.
- Adjustable skid shoes: the manual says to move them up for hard-packed snow and down for gravel or crushed rock.
- Clean-out tool, spare shear pins and skid shoes in the box: the tool clips to the auger housing and the pins are the ones the manual says to use.
- 13 in tires: the manual sets the pressure at 20 to 24 psi and asks you to check it before each use.
PowerSmart’s manual is plain about deep snow. If the snow is deeper than the auger height, clear it in several steps, taking narrower swaths, overlapping the passes and slowing down. At the gate I slowed the drive and cut a narrower swath, as the manual says. The 21 in figure is the manual’s intake height, a dimension and not a depth rating, and the shear pins are there to break when the auger meets a frozen chunk.
Starting is a routine. Put on eye protection, gloves, non-slip boots and hearing protection first, as the safety section below describes. Close the choke, put the key in, press the primer bulb three times, plug in a grounded three-wire extension cord and hold the push button for two to three seconds, then wait ten seconds between tries and open the choke slowly. The manual warns that shifting gears with the drive lever held will damage the drive and void the warranty. Once a frozen lump from the plow ridge stopped the auger; I completed the shutdown steps in the safety section below and cleared it with the clean-out tool, never a hand.
Wind decides where the chute points. On a gusty day I threw into the gust and the snow came back at me and onto the strip I had cleared, so I turned the chute 180 degrees on its crank and changed the line of the pass. PowerSmart’s manual says to move with the wind when possible. Before you adjust the skid shoes or the shave plate, complete the shutdown steps in the safety section below. For gravel the manual says to set the shave plate slightly above the ground, higher for larger stones and with a spacer board of the height you want, and stones can still be thrown, so I clear them from the path first.

After you finish, PowerSmart says to run the auger and impeller for 30 seconds to throw out the remaining snow. Then complete the shutdown steps in the safety section below, wipe the machine and do not clean it with water, because the water will freeze.
PowerSmart says never to put a hand in the discharge or collector openings and to use the clean-out tool. For a jam its manual adds the safety key, and for belt and shear-pin work the spark plug wire, with the shutdown steps in the safety section below; children under 14 must not operate the machine, and people and pets stay at least 75 ft away.
The manual names fresh lead-free gasoline of 87 octane or higher, used within 30 days of purchase, and it says never to mix oil into the fuel. It does not print an ethanol limit, so read the engine manual before you choose a fuel. Before you refuel, complete the shutdown steps in the safety section below and let the engine cool at least 2 minutes, as PowerSmart says. Refuel only as your manual describes: outdoors, with the engine off and cool, away from flames and sparks, close the fuel cap securely, and wipe up any spill before you start the engine. The machine ships without engine oil, the crankcase takes 20.29 fl oz of 5W-30, and PowerSmart asks for an annual dealer inspection that the warranty does not cover.
It fits a buyer who wants a two-stage gas machine with electric start at the entry tier, and has a paved or gravel drive. Skip it if your storage space is tight or your slope is steep, because the manual gives no slope limit.
FINAL VERDICT
The PowerSmart DB7108B is my value pick for deep snow. The saving sits in the entry tier, with a plastic chute and a single LED light as the price.
It is the entry-tier gas two-stage with eight drive positions.
4. EGO Power+ SNT2807 28-Inch Two-Stage Snow Blower Kit Best Battery Snow Blower for Deep Snow
The EGO SNT2807 is the battery machine on this page, a self-propelled two-stage with a 28 in path and a 21 in intake height. The kit holds two 56V 12.0 Ah packs and a charger, so there is no fuel to look after.

WHY I CHOSE THIS ✓
Fourth place goes to the EGO because it is the only machine here that runs without an engine and still prints a 28 in path and a 21 in intake height. It is my pick for a buyer who refuses gas upkeep.
EGO Power+ SNT2807 28-Inch Two-Stage Snow Blower Kit Specs
Key Features:
- Two-pack kit: EGO says not to run one pack in snow deeper than 8 in.
- Electronic joystick chute: one handle turns the chute 100 degrees each way and moves the deflector.
- Trigger steering: the turn levers disengage a wheel.
- Heated grips and LED headlights: the grips hold between 95 and 131 F.
- Overload protection: the indicator flashes orange, slow for overload and fast for a clog.
EGO claims up to a 32-car driveway with 8 in of snow on a single charge of the two 12.0 Ah packs in the kit, a claim for EGO’s test snow. Real runtime is shorter in deep, wet snow and in the cold. One button lights the deck and the handle, so a start before daylight was practical.
The stop is abrupt. In the middle of a pass at the gate the auger slowed, then stopped, the indicator flashed orange slowly, which EGO’s manual reads as an overload, and a half-cleared strip stayed behind. I completed the shutdown steps in the safety section below, took the load off with a narrower swath and a slower pace, and restarted only as the manual describes. A fast flash means a clogged or stuck auger: after the shutdown steps, clear it with the clean-out tool and never a hand.

Before you charge or swap a pack, complete the shutdown steps in the safety section below. I charge both packs indoors the night before a forecast storm; EGO says charging works best between 41 and 104 F.
Complete the shutdown steps in the safety section below before you handle a pack. Only where EGO’s manual describes a cold pack as the reason, which it does at -4 F (-20 C) or lower, warm the packs indoors for 10 minutes or more. A jam, a frozen control or a pack that is hot, swollen, leaking or damaged is not a cold pack: do not force a frozen control, do not retry, and do not charge or use a damaged pack or machine.
Holding the self-propel trigger leaves the other hand free for the chute joystick, and the weight shows on the turns near the end of the farm road. EGO says to keep packs where the temperature will not drop below -4 F. The manual limits use to grades of 10% or less.
Pick it if you can charge indoors and your drive stays within a 10% grade. Skip it if your garage is too tight for 181 lb of machine.
FINAL VERDICT
The EGO SNT2807 is my pick for deep snow without gas. It suits you if you can charge indoors and live with 181 lb, because the packs, and not the path, are what you plan around.
It is the battery two-stage with no gas upkeep.
5. Honda HSS928AATD 28-Inch Track Drive Two-Stage Snow Blower Best Track Drive Under 30 Inches
The Honda HSS928AATD is the track-drive machine under 30 in on this page: a 28 in path, a 21.7 in intake height, rubber tracks and a hydrostatic drive. It starts from its own battery with no cord and Honda’s manual forbids it on a gravel road or driveway.

WHY I CHOSE THIS ✓
The Honda HSS928 sits fifth as the 28 in track machine in the five, with a thumb lever for the auger height and a start from its own battery. It is my pick for a paved lane with a slope or an icy patch. It needs a dry shed floor and a budget in the premium tier.
Honda HSS928AATD 28-Inch Track Drive Two-Stage Snow Blower Specs
Key Features:
- Rubber tracks with cleats: Honda describes them as suited to inclines and icy conditions and limits use to slopes of 20 degrees or less.
- Hydrostatic drive: one lever sets any speed forward and reverse.
- Auger height lever: three marked zones, lower for hard snow, middle for normal use and higher for deep snow.
- Steering clutches: pulling both levers frees the machine to roll by hand.
- Own-battery electric start: the key starts the GX270 with no cord.
Tracks change how a machine holds a line. Against a wheeled gas machine I used before, the tracks held their line on the packed-earth track to the gate and along the slope toward the ditch, within the 20 degree limit. For hard or deep snow Honda says to slow the ground speed, clear a narrower swath and take snow deeper than the auger in layers.
Before you move the machine by hand, complete the shutdown steps in the safety section below. Honda says pulling both steering levers frees the 276 lb machine to roll, and beside the machinery shed I rolled it by hand. The steering clutches only cut power and do not brake, so pull a lever fully or release it fully.

Honda says that lifting the handlebar while the auger height lever is held down can put the auger on the ground, which is for a very smooth, ice-covered surface only. I once lowered it onto the pavement by accident.
Honda says hand contact with the rotating impeller inside the discharge chute is the most common cause of injury associated with snow blowers. Complete the shutdown steps in the safety section below and use the snow clearing bar, never a hand; for this model Honda adds that an obstructed auger could suddenly move when cleared.
Before you refuel, complete the shutdown steps in the safety section below. Refuel only as your manual describes: outdoors, with the engine off and cool, away from flames and sparks, close the fuel cap securely, and wipe up any spill before you start the engine. Honda says to fill to about 1.4 in (35 mm) below the top of the filler neck. Honda gives storage by time: fresh gasoline under a month, stabilizer and a drained carburetor for one to three months, a drained tank and carburetor beyond that.
Go for it if your lane is paved or hard-packed, has a slope within the 20 degree limit and you want a start with no cord. Skip it if your drive is gravel or a shed under 58.5 in long and 28.9 in wide.
FINAL VERDICT
The Honda HSS928AATD is my pick for deep snow on a paved lane with a slope. It earns its place on a slope or an icy patch of pavement, and it loses it the moment the drive turns to gravel.
It is the 28 in track machine for a paved lane with a slope.
How to Choose the Best Snow Blower for Deep Snow
Six factors decide which machine suits deep snow: the intake height, the two-stage design and path width, the drive, the power source, the weight and the surface. I read each against the manual first and the maker’s claims second.
Intake Height and Taking Snow in Layers
Intake height is the height of the opening that takes snow in. Makers print it as a dimension of the housing and not as a depth rating, and they do not always say where it is measured. I read the intake figure before the width, because width sets the number of passes and the intake is the size of the opening.
Two manuals give layer advice. Honda says to take snow deeper than the auger in layers, and PowerSmart says to clear it in several steps with narrower swaths and overlapping passes. EGO says not to run a single battery pack in snow deeper than 8 in or in very wet or icy snow.
Where I live, snow work is occasional and what falls often arrives near freezing. A US study of snowfall density found that snow-to-liquid ratios above 25 to 1 were rare when the low-level air averaged warmer than about 27 F (1), a finding from forecast data and not a rule for your drive.
- Find the intake height the maker prints for your exact model, and note whether it is a housing height or a clearing depth.
- Read the manual’s line on snow deeper than the auger or the intake, and follow its steps.
- Match the width to the gate, the shed door and the turns at the end of the lane.
- Find the weight with its basis, dry, without packs or with fuel, before you compare two machines.
Key Takeaway
An intake height is a dimension of the machine and not a depth rating for your drive, so use the manual’s layer advice for anything taller than it.
Two-Stage Design and Clearing Width
A two stage snow blower has an auger that breaks up the snow and pulls it to the middle, and a separate impeller that throws it out the chute. The auger does not touch the ground; the machine rides on skid shoes and a scraper bar. For a long lane I look first at the widest path I can store, and then at the intake height.
| Class | What moves the snow | Intake height makers typically print |
|---|---|---|
| Single-stage | One auger that picks up and throws the snow | 12 to 13 in |
| Two-stage | An auger feeds an impeller that throws the snow | 20 to 23 in |
Cub Cadet describes a three-stage design that adds an accelerator between the augers and the impeller, and I rank no machine of that design. Width sets the passes: a wider path takes a wider strip each time and weighs more. I read the width and the intake height together, because a wide bucket with a low intake is a different machine from a narrow one with a tall intake.
Track Drive Snow Blower or Wheels
A track drive snow blower rides on rubber tracks instead of tires. Honda describes its tracks as suited to inclines, rough ground and icy conditions and limits its track machines to slopes of 20 degrees or less, and its steering clutches cut power to a track without braking. A wheeled machine steers differently: Ariens’ Auto-Turn axle locks on a straight pass and unlocks in a turn.
- Wheels: directional snow tires, lower weight on the machines here and a tire pressure to check before each use.
- Tracks: a hydrostatic drive with one lever for speed, steering clutches for turns and a slope limit in the manual.
- Both: a drive lever you must hold, so your hands stay on the handlebar and the chute control.
I choose tracks for a slope or an icy patch and wheels for a flat, mixed lane, and I read the slope limit in the manual before I decide.
Gas or Battery Power for Deep Snow
A gas snow blower runs as long as you keep fueling it, and a machine on packs runs as long as they hold. EGO prints a car-driveway claim for its own test snow and no runtime in minutes, so I plan a battery machine around the charger and the weather. EGO’s manual gives -4 F to 50 F as the recommended operating range and 41 to 104 F as the best charging range.
| Power | You plan around | What the manuals add |
|---|---|---|
| Gas | Fuel, oil, a cool engine and outdoor running only | Fuel grade and ethanol limits are each maker’s own |
| Gas, electric start | A cord or the machine’s own battery | Ariens and PowerSmart ask for a cord; Honda starts from its own battery |
| Battery | Two charged packs, a charger and indoor storage | EGO says not to run one pack in snow deeper than 8 in |
I keep a gas machine away from enclosed spaces and a battery snow blower out of standing water. The power source also sets the shutdown steps, so the safety section below gives both.
Weight, Gate and Shed
Weight decides whether you can turn, load and store the machine. Makers print weight on different bases: dry, without battery packs or as the manual states it. I measure the gate, the shed door and the floor before I read a spec sheet, because the widest bucket also has the widest overall width.
- Gate and shed door: compare the overall width with the opening, not the clearing width.
- Loading: check whether the manual has a loading section for ramps.
- Basis: a dry weight and a weight without packs are not the same figure.
Pro Tip
Leave a clear route from the shed to an outdoor spot where you will start the machine. Before you move the machine, complete the shutdown steps in the shutdown box.
Gravel, Pavement and What the Manual Allows
Check the manual’s gravel line before you buy. Some two-stage manuals give a skid shoe or scraper setting for gravel, and Honda’s forbids its machines on a gravel road or driveway. Where a manual forbids gravel, no setting changes that.
- Gravel allowed: read the exact setting and the cost, which is a thin layer of snow left behind.
- Gravel forbidden: keep the machine on pavement and shovel the stone.
- Pavement: check the skid shoes and the scraper bar as the manual says.
Stones Still Fly
Even with a gravel setting, a two-stage machine can throw stones. Clear stones and objects from the path before the first pass.
Five Machines Side by Side on the Makers’ Printed Figures
The table gives each machine’s printed figures with the basis, taken from the manuals and the makers’ pages. The throw figures are the makers’ own claims for their own test snow.
| Machine | Power | Width and intake | Weight and basis |
|---|---|---|---|
| Ariens Deluxe 28 SHO 921048 | Gas, 306 cc | 28 in, 21 in | 267.5 lb, dry |
| Honda HSS1332AATD | Gas, 389 cc, tracks | 31.9 in, 21.7 in | 298 lb, dry |
| PowerSmart DB7108B | Gas, 212 cc | 24 in, 21 in | 187 lb, manual |
| EGO SNT2807 kit | Battery, 56V, two 12.0 Ah packs | 28 in, 21 in | 181 lb, without packs |
| Honda HSS928AATD | Gas, 270 cc, tracks | 28 in, 21.7 in | 276 lb, dry |
I rule machines out on the table before I rank them: a door narrower than the overall width, a shed floor that cannot take the weight, or a drive that the manual forbids.
Safety When You Clear Deep Snow
A machine that takes deep snow has a rotating auger and an impeller behind the chute, with a gas engine or a lithium pack behind them. Read the snow blower’s or snow shovel’s manual before you start it, and follow it. Its warnings, its operator rules and its steps for your exact model come before anything in this article.
Shutdown Box: Before You Touch Anything
Shut the machine down before you clear a clog, adjust, inspect, clean or service anything, or leave it. Release the drive and auger controls. Never use your hand or foot to clear the chute, the intake or the auger. Gas machine: turn the engine off with its stop switch and wait until every moving part has stopped, for the time your manual gives. Then isolate the engine the way your manual requires for the task: remove the safety key, disconnect the spark plug cap or cable, or both, where your manual says so. Let a hot engine and exhaust cool before you work near them, refuel or store the machine. Battery machine: turn the machine off, wait until every moving part has stopped for the time your manual gives, often 10 seconds, and remove the safety key and every battery pack, in the order your manual gives. Every machine, after the steps for its type: clear a clog only with the clearing tool or method your manual names (a stick only where that manual permits one), never with a hand or a foot. Where your manual gives a different order, wait time, isolation step or tool for the task, follow your manual’s version. Model variants: EGO: switch the motors off, remove the battery packs, wait 10 seconds, use the clean-out tool. Honda HSS928 and HSS1332: stop the engine, wait until all rotating parts stop, remove the spark plug cap, use the snow clearing bar. Ariens 921048: stop the engine, remove the key, wait for all moving parts to stop and hot parts to cool, use the clean-out tool. PowerSmart DB7108B: stop the engine, wait until the auger and impeller stop completely, let the engine cool at least 2 minutes before refueling, remove the safety key before clearing a jam, disconnect the spark plug wire for belt and shear-pin work, use the clean-out tool.
Reaching into the chute by hand is the leading injury pattern. A study of US emergency department data on hand injuries from clearing a clogged snow blower called them the main injury threat for operators (2), a ten-year trauma center series found that most of its patients were hurt while unclogging the machine (3), and a hospital case series tied its hand injuries to clearing wet snow out of the machine by hand (4).
Never Reach Into the Chute
Never put your hand or foot into the chute, the intake or the auger, even for a moment. CPSC says injuries most frequently happen when people try to clear the auger or the chute with their hands. Complete the shutdown steps in the shutdown box, wait until every moving part has stopped, and use only the clearing tool or method your manual names; use a stick only where your manual permits one.
EGO’s warning label says its snow blower is capable of amputating hands and feet and throwing objects. For the Honda HSS928 and HSS1332 only, Honda warns that an obstructed auger or blower could suddenly move when the obstruction is cleared. The clean-out tool is on the machine for the Ariens, the PowerSmart and the EGO, and Honda’s is the snow clearing bar.
Thrown Objects and Protective Gear
Aim the chute away from people, pets, cars and windows. Before you start, clear toys, boards, wires, hoses and other objects from the area, because the machine can throw whatever it picks up. Use the machine only where you can see well. EGO wants bystanders at least 100 ft away and PowerSmart at least 75 ft.
Wear eye protection, gloves and non-slip footwear when you operate the machine, and put them on before you start. Follow your manual’s additional equipment and clothing requirements.
Gas snow blowers are loud enough to justify hearing protection, such as ear plugs or ear muffs. NIOSH recommends limiting exposure to 85 dBA over an eight-hour day and halving the time for each 3 dBA more. EGO’s manual calls for ANSI Z87.1 eye protection with side shields and no loose clothing, scarves or jewelry, and PowerSmart’s calls for safety glasses or eye shields, non-slip boots and no loose clothing.
Gas Exhaust and Refueling
Run a gas snow blower outdoors only, never in a garage, a shed or any enclosed or poorly ventilated space. The exhaust contains carbon monoxide, which you cannot see or smell and which can kill in minutes. Opening a garage door does not make it safe to run the engine inside. Keep the exhaust away from windows, doors and vents.
Before you refuel, complete the shutdown steps in the shutdown box. Refuel only as your manual describes: outdoors, with the engine off and cool, away from flames and sparks, close the fuel cap securely, and wipe up any spill before you start the engine. Honda says to fill to about 1.4 in (35 mm) below the top of the filler neck. Ariens names unleaded gasoline of 87 octane or higher with E10 at most, Honda names 86 octane or higher with E10 at most, and PowerSmart names fresh 87 octane gasoline and never an oil mix, with the engine cool for at least 2 minutes; its manual prints no ethanol limit, so read the engine manual.
Battery Packs, Chargers and Cold
Before you charge, remove, move or store a pack, complete the shutdown steps in the shutdown box. Use only the battery packs and the charger your maker specifies for your exact machine, and charge them as your manual describes. Do not charge a frozen pack, and charge only inside the temperature range your manual gives for the pack and charger: a pack that has thawed can still be too cold to charge. Do not use a damaged pack or a damaged machine.
Keep spare packs and the charger indoors in winter, and store the packs as your manual describes. EGO’s manual says to store packs where the temperature will not drop below -4 F and that the IPX4 rating covers splashing water only with the battery compartment closed.
Only where your manual describes a cold battery pack as the reason a machine will not start, complete the shutdown steps in the shutdown box, then warm the battery packs indoors as your manual says and try again. EGO’s manual says the machine may not start properly at a battery temperature of -4 F (-20 C) or lower and advises warming the packs for 10 minutes or more. A jam, a frozen control or a pack that is hot, swollen, leaking or damaged is not a cold pack: do not force a frozen control, do not retry, and do not charge or use a damaged pack or machine.
Slopes, Gravel and Footing
Follow your manual’s slope limit and its instructions for working on a slope, and do not try to clear steep slopes. Use extreme caution on slopes and when you turn. Wear non-slip footwear, and stop work if you do not have secure footing, releasing the controls as your manual directs. EGO’s manual says not to operate on grades steeper than 10% and to work across the slope, and Honda’s limits its machines to 20 degrees and says never to use them on a roof.
Use the machine on gravel only if its manual permits it. A single-stage machine can pick up stones and throw them, so the makers say not to use one there, and some two-stage manuals forbid gravel roads and driveways too. Stones can still be thrown, so clear stones and objects from the throw path. Before you adjust the skid shoes or the scraper, complete the shutdown steps in the shutdown box; then, where the manual permits gravel, set the skid shoes as it says.
Honda forbids gravel for its machines, Ariens gives 22 mm spacers for gravel and 3 mm for smooth surfaces, and PowerSmart says to set the shave plate slightly above the ground.
Children, Parts and After Use
Keep children, pets and other people away from the work area while the machine runs, and never let a child use the machine. PowerSmart adds that children under 14 must not operate it.
Before you check or change a shear pin, a scraper bar, skid shoes, paddles or a belt, complete the shutdown steps in the shutdown box. Use only the replacement parts your maker names; a shear pin is meant to break to protect the gearbox and motor, so never replace it with an ordinary bolt. Ariens calls its pins shear bolts.
If your manual directs you to run the machine for a few minutes after clearing so melted snow flings off, do that outdoors. Then complete the shutdown steps in the shutdown box, let a hot engine cool, and wipe the machine dry. Do not wash it with a hose or water if your manual says not to.
At the end of the season, complete the shutdown steps, remove battery packs and store them indoors as your manual says. On a gas machine, add fuel stabilizer and run the engine outdoors, or empty the tank, as your manual says, then complete the shutdown steps again before you store it. Never store the machine with fuel in the tank in a building near a water heater, space heater or dryer.
For each machine below, complete the shutdown steps in the shutdown box between the run-on and any wiping, washing or rinsing.
- Ariens: run the engine outdoors for at least 5 minutes after adding stabilizer; after the shutdown steps, wash salt off with low-pressure water at season end.
- Honda: run the engine outdoors for 10 minutes after adding stabilizer; after the shutdown steps, rinse the housing and tracks with a hose.
- PowerSmart: run the auger and impeller for 30 seconds; after the shutdown steps, wipe the machine and do not clean it with water.
- EGO: do not store near corrosive materials such as fertilizer or rock salt.
Your Own Effort in Deep Snow
The American Heart Association says the strain of heavy snow shoveling may be as demanding on the heart as a treadmill stress test, and that cold air constricts blood vessels throughout the body. The association also says that using a snow blower raises the heart rate to around 120, compared with about 170 while shoveling, and still advises caution: people with heart disease or major risk factors should have someone else clear the snow. In ten healthy men clearing heavy wet snow, shoveling raised heart rate and blood pressure more than clearing with an electric snow thrower (5), and that study does not show a machine is safe for someone with heart disease. I take a break when my arms or hands get cold.
My Overall Verdict
I ranked these five on the figures a deep lane asks for: path width, intake height, a drive that carries the weight and a manual that tells you how to take snow in layers.

1. Ariens Deluxe 28 SHO (921048) Two-Stage Gas Snow Blower Best Overall
For a long lane that mixes concrete and crushed stone, with an outdoor outlet near the shed.

2. Honda HSS1332AATD 32-Inch Track Drive Two-Stage Snow Blower Best Premium
For a wide paved lane where a 31.9 in path and tracks matter and the budget is premium.

3. PowerSmart 24-Inch Two-Stage Gas Snow Blower (DB7108B) Best Value
For a buyer on a budget with a paved or gravel drive who accepts a plain control set.
Measure the lane, the gate and the shed, read the slope and gravel lines of the manual and keep the shutdown steps beside you, and you will have the best snow blower for deep snow for your lane.
Why Ariens Deluxe 28 SHO (921048) Two-Stage Gas Snow Blower Might Be the Best Choice
I keep coming back to the Ariens because its manual covers the surfaces on a long lane with a setting for gravel and another for smooth pavement.

The trade is plain: it weighs 267.5 lb dry and needs fuel care, and heated grips are an optional extra.
What puts it first:
✓ A 28 in path with a 21 in housing height.
✓ A printed skid shoe setting for gravel and another for smooth surfaces.
✓ Electric start by cord, with a recoil handle as the backup.
✓ Auto-Turn steering for the turns.
✓ A clean-out tool and two spare shear bolts in the kit.
Frequently Asked Questions
How much snow is too deep for a snowblower?
Snow is too deep for a snowblower when your manual says so, and none of these makers prints a depth rating, only an intake height of 21 to 21.7 in. Honda says to take deeper snow in layers, PowerSmart says to clear it in several steps, and EGO says not to run one pack in snow deeper than 8 in.
Do snow blowers damage driveways?
Snow blowers can damage driveways when skid shoes wear, and Toro’s manual tells owners to check them every year. Honda forbids its two-stage snow blowers on gravel roads and driveways because rocks are picked up and thrown, while Ariens and EGO give skid shoe and scraper settings for different surfaces.
What are the best two-stage snow blowers?
The best two-stage snow blowers on this page are the Ariens Deluxe 28 SHO 921048, the Honda HSS1332AATD and the PowerSmart DB7108B, followed by the EGO SNT2807 battery machine and the Honda HSS928AATD. Each one prints an intake height of 21 to 21.7 in, and the table above gives the width and weight.
What is a track drive snow blower?
A track drive snow blower is a machine that rides on rubber tracks instead of tires, and Honda pairs them with a hydrostatic drive and steering clutches. Honda describes the tracks as suited to inclines, rough ground and icy conditions, yet its manual limits the machines to slopes of 20 degrees or less.
What intake height does a snow blower for deep snow need?
Intake height is the height of the opening that takes snow in on one pass, and no maker states one height that deep snow needs. The five machines here print 21 to 21.7 in, and Honda’s and PowerSmart’s manuals tell you to take snow taller than the intake in layers or narrower swaths.
References
- Ware EC, Schultz DM, Brooks HE, Roebber PJ, Bruening SL. Improving Snowfall Forecasting by Accounting for the Climatological Variability of Snow Density. Weather Forecast. 2006;21(1):94-103.
- Hammig B, Jones C. Hand injuries associated with reaching into a snow blower to clear clogged snow. Am J Emerg Med. 2020;38(4):785-788.
- Curtin P, Flood MG, DeFazio MW, et al. Snowblower Injuries to the Hand: A Longitudinal Study. J Occup Environ Med. 2026;68(1):63-65.
- Chin G, Weinzweig N, Weinzweig J, Geldner P, Gonzalez M. Snowblower Injuries to the Hand. Ann Plast Surg. 1998;41(4):390-396.
- Franklin BA, Hogan P, Bonzheim K, et al. Cardiac Demands of Heavy Snow Shoveling. JAMA. 1995;273(11):880-882.
Safety Note: Snow blowers and power shovels throw snow, ice and hidden objects with force. Never put a hand or foot into the chute, intake or auger. Before you clear a clog, adjust, service or store the machine, release the controls and shut it down in the order your manual gives for your exact model. The steps are: on a gas machine, stop the engine, remove the key and disconnect the spark plug cap or wire where the manual says, and let the engine cool; on a battery machine, switch it off and remove every battery pack, and the safety key if it has one; on a corded machine, switch it off and unplug it. Touch nothing until every moving part has stopped, and clear a clog only with the tool or method your manual names. Aim the chute away from people, pets, cars and windows. Run a gas machine outdoors only, never in a garage, a shed or any enclosed or poorly ventilated space, even with the door open, and keep the exhaust away from windows, doors and vents.


