This Master Manufacturing spot sprayer review covers the 15-gallon SSN-01-015A-MM, and my verdict is plain: buy it if you want a simple 12V tank, pump and trigger gun for an ATV, UTV or other vehicle rack, and skip it if you want a battery sprayer. It runs only from a vehicle battery through clamps and ships with no rack, straps or boom. My plant protection training taught me to read a spray rig’s manual before I look at its tank, so I started there. Below are the specs, the wiring, the gun, the safety steps and two 12V alternatives.
Affiliate Disclosure: Garden Power Scout is a proud participant in the Amazon Services LLC Associates Program. As an Amazon Associate, we earn from qualifying purchases, at no extra cost to you.
Master Manufacturing Spot Sprayer Review and Verdict
The Master Mfg SSN-01-015A-MM is a 15-gallon white polyethylene tank with a 12V diaphragm pump on top, a 15 ft hose and a trigger gun with a lock. According to Master Manufacturing, the pump is rated 1.0 GPM, with a separate ceiling of up to 40 PSI, and the gun reaches 18 ft vertical and 20 ft horizontal. Master Mfg 15-Gallon UTV and ATV Spot Sprayer clamps to a vehicle battery through an 8 ft harness, and no battery or charger comes in the box.
At the mid-range tier it suits spot jobs along fence lines and orchard edges. The trade-off is that you supply the rack, the straps and the 12V source yourself, and the manual says the pressure regulator and gauge come only on boom-ready spot sprayers and completed broadcast sprayers, so this model has neither.
- Who it is for: Owners of an ATV, UTV or other vehicle who want a hand-gun spot sprayer on a rack.
- What it does best: A plain tank, pump and gun with a 5 in lid, a trigger lock and a two-year parts warranty in the maker’s manual.
- Main trade-off: No battery, rack, straps, regulator or gauge, so the wiring and the mounting are your job.

Master Mfg 15 Gallon Spot Sprayer Specs and Box Contents
Two rows decide this purchase: the power source and the tank. The other rows show what you still have to supply.
| Spec | Master Mfg SSN-01-015A-MM |
|---|---|
| Sprayer type | 12V ATV/UTV spot sprayer, in the maker’s words a 12 Volt Spot Sprayer |
| Power source | 12V DC from a vehicle battery, 8 ft harness with alligator clamps; no battery or charger |
| Tank capacity | 15 gallons, UV-resistant polyethylene, 5 in lid |
| Pump | Everflo 12V on-demand diaphragm pump |
| Pump flow, maker’s figure | 1.0 GPM |
| Pressure, maker’s ceiling | Up to 40 PSI |
| Hose and gun | 15 ft hose; trigger gun with trigger lock and in-handle filter |
| Reach, maker’s figure | 18 ft vertical, 20 ft horizontal |
| Weight | Not published by the maker |
| Warranty | Two years from date of purchase, replacement parts only (manual) |
In the box: the tank, the lid with its tether, the spray gun, the hose, the wire harness, the drain cap with its gasket and tether, a gun clip kit and hose clamps, and some of these parts ship inside the tank. Not in the box: tools, thread-seal tape, a rack, straps, or a boom or mounting kit, which Master Mfg sells separately. The listing offers a 9-gallon and a 15-gallon size, so check the size selector before you order. In my hands the tank is a long, low shape rather than a tall one, which fits a flat rack.
12V Wiring, Pump and the Full Shutdown
A 12V ATV sprayer has no battery of its own, so every hands-on job starts with the vehicle and the pump’s supply. This section holds the one complete shutdown box for the whole review, and every later section points back to it.
Full Shutdown Box
Emergency first: if a battery becomes unusually hot, swells, hisses, gives off an unusual odor or smokes, stop using the sprayer without handling or removing the battery, keep people away and follow the battery manual’s emergency instructions; if it smokes, burns or presents immediate danger, move away and call 911 or the fire department without finishing the routine shutdown. Shutdown before you open the tank, fill or refill it, change or clean a nozzle, clear a clogged nozzle, clean or rinse the sprayer, adjust or repair anything, charge or change the battery, move, store or leave the sprayer. Never point the wand at yourself, another person or a pet. During normal spraying, move only as the equipment manuals and the product label permit; walking while spraying with a backpack unit, or driving a mounted boom at the spraying speed its manual describes, is operation, not transport. Never ride while operating a hand-held wand or lance. 12V vehicle sprayer (ATV, UTV, cart or tow-behind): first stop and secure the vehicle as its manual directs. Then release the trigger, close the wand or boom valve and switch the pump off at its switch. Relieve all trapped pressure using only your exact manual’s procedure and a discharge destination consistent with the product label, without opening the tank or loosening any part beforehand unless that procedure expressly requires it, and never toward yourself, another person or an animal. Then disconnect the pump’s 12V supply at the connection your manual specifies. Reconnect it only after the work is complete, every part is secured and the pump switch is off. Wear the protective equipment the product label requires while you clean the tank, the strainer or a nozzle. Clear a clogged nozzle only with the method in your exact manual; never clear a nozzle with your mouth and never by blowing into it. Add every step your manual gives, in its order. Refit every part, close the lid and check for leaks with clean water before product goes back in.
Clamps and Harness
Before you do this, complete the full shutdown for your sprayer in the shutdown box above. Then read the maker’s wiring line: clamps on opposite posts make the pump run backwards. The manual says to connect the red clamp to your battery’s positive post and the black clamp to the negative post, and to join the harness to the pump by pushing the two-pin terminal connectors together. Before any wiring I laid the 8 ft harness out beside the tank and traced the red and black clamps to the two-pin connector that pushes onto the pump.
12V Wiring
Before any wiring work on the pump, complete the full shutdown in the shutdown box, including its emergency exception and securing the vehicle. Wire the pump the way your sprayer’s manual says, and use the fuse the manual lists. To disconnect the supply, follow the shutdown box through securing the vehicle, stopping the pump and relieving the pressure, then disconnect it as your manual directs; reconnect it only after the work is complete, every part is secured and the pump switch is off.
Master Manufacturing words the pressure step in the opposite order from the box: its manual says to disconnect power to the sprayer and to be sure all system pressure is relieved by squeezing the gun trigger. For this model, follow the manual’s order and procedure, keep the emergency exception ahead of both, and never squeeze the trigger toward yourself, another person or an animal. If anything about the order is unclear, ask Master Manufacturing before you open or loosen anything.
The Pump
According to Master Manufacturing, the pump is an Everflo 12V on-demand pump rated 1.0 GPM, and its 40 PSI is a ceiling. NDSU Extension notes that diaphragm pumps are commonly used with ATV sprayers (1). The maker says to keep the power off until you are ready to spray, and I like a pump that waits for me.

Tank, Lid, Strainer and Drain Cap
Before you start any of this work, complete the full shutdown for your sprayer in the shutdown box above. The first fill should be clean water only. I check the ATV sprayer tank, the strainer and the drain cap before any product goes near it.
First Water Test and Pre-Use Check
Before the first water test, complete the full shutdown in the shutdown box, then fill the tank with clean water and close the lid as your manual directs. Connect the power (install the battery or connect the 12V supply) only when you are ready to test. Run the sprayer and watch the wand, hose, fittings and tank seams for leaks without touching pressurized parts. Before you open the tank, correct a leak or add product, complete the full shutdown again. Before every use, check the tank, strainer, hose and nozzle, and fix any leak before product goes in. Follow your manual’s first-use steps.
On the first fill with clean water I checked the drain cap with its gasket and tether, the lid and its tether, and the hose clamps, the spots the manual’s test-with-fresh-water step exists to catch. In a study of Nicaraguan subsistence farmers using backpack sprayers, leaking or poorly sealed tanks were among the factors behind skin exposure (2); that was a backpack in another country, but a leaking tank is a bad starting point anywhere.
I look inside the tank before the first fill, because the manual says some parts are shipped inside it. The 5 in lid has a tether, and it takes a funnel or a jug spout without careful aiming. The suction strainer sits inside, and the manual calls for rubber gloves when you clean it.
The manual says this sprayer is for “a wide range of agricultural pesticides, herbicides and other non-flammable liquids”, and it forbids flammable chemicals such as diesel fuel and corrosive chemicals such as bleach, which can weaken the sprayer and cause leaks. Using them voids the warranty, and the sprayer is not certified for drinking water or other consumable liquids.
Mixing and Loading
Before you load the sprayer, complete the applicable full shutdown in the shutdown box, including its emergency exception, and wear the protective equipment the product label and your manual require for the task. Mix and load outdoors, away from other people (including children), pets and livestock, and where a spill or overflow cannot reach a well, a drain or other water. Read the label before you open the container, stand upwind, and do not eat, drink or smoke while you handle pesticides. Never use your mouth to siphon a pesticide from its container. Keep the fill hose above the level of the liquid in the tank so the product cannot siphon back into your water supply, and never leave the sprayer unattended while you fill it. Use measuring tools kept only for pesticides, never kitchen utensils or food containers. Mix only as much as the job needs so the tank ends empty; do not store leftover mix in the sprayer for later, because it can damage the sprayer’s parts.
The Label Sets the Amount
The product label, not this page, gives the amount of product, the dilution and the mixing order, so read it before you mix. Do not combine products unless the mixture complies with every product’s label and its compatibility has been established through the manufacturers or a qualified pesticide specialist; nobody’s advice overrides a label prohibition.
Gun, Nozzle and Reach
Before you do any of this, complete the full shutdown for your sprayer in the shutdown box above. That includes changing the nozzle, because the manual says to use chemical resistant gloves when you twist it and never to unclog it by blowing through it.
According to Master Manufacturing, the gun has a trigger lock and an in-handle filter, and the nozzle twists from a straight stream to a wide mist. With clean water, I turned the nozzle from stream to mist against a wall to see both patterns, and the trigger lock held the trigger steady in a gloved hand. Nozzle type, nozzle size and pressure all change the droplet size spectrum, a result measured on boom nozzles in a climate room rather than on a hand gun (3).
Pressure and Nozzle
A sprayer’s maximum pressure is the limit of the machine, not a setting to aim for. The product label and the nozzle’s maker decide the pressure and the nozzle for a job. Higher pressure makes more fine droplets that drift, and the nozzle you choose changes the droplet size.
The maker’s reach figures are 18 ft vertical and 20 ft horizontal from the 15 ft hose. Against a fence line or the edge of my orchard rows, that is a long reach to manage, so I park and walk the line instead of stretching. It is the maker’s figure, not a result I measured.
Hand Wand on a Vehicle
Montana State University Extension advises not to ride and spray if you have to hold a wand or lance.
Mounting, Load and Riding on a Vehicle
Before you start any of this work, complete the full shutdown for your sprayer in the shutdown box above. This unit rides on a vehicle you supply, and the manual says to make sure the sprayer is securely attached to it. Master Mfg sells mounting kits separately for the molded inserts in the tank, so plan the rack before you plan the first job.
Power to the sprayer and the vehicle must be off and the brakes set before you fill the tank, according to the manual. It also says to turn off the vehicle, set the brake or block the wheels, turn off power to the sprayer and relieve system pressure before you leave the sprayer unattended.
ATV and UTV Riding
Wear the helmet and other protective gear the Consumer Product Safety Commission recommends, get hands-on training from a qualified instructor, and sit only in the positions the manufacturer designed for occupants. The CPSC says never to ride with more passengers than there are seats. In a UTV, fasten the seat belts and keep every part of your body inside the vehicle as its manual directs. The CPSC says riders younger than 16 should drive only age-appropriate youth model ATVs, never adult ATVs, and that off-road vehicles are designed for off-road terrain, not paved surfaces. Most ATVs seat one rider.
Load, Surge and Slopes
Stay within the rack and tow capacity in your vehicle’s owner’s manual. Sloshing liquid shifts weight and changes how the vehicle handles: Montana State University Extension advises a spray tank with internal baffles and the lowest practical center of gravity, a boom that works as low to the ground as possible, and a rear-mounted boom or equipment that lowers the operator’s exposure. On an ATV, follow its manual and your hands-on training for body position and for the slopes it permits with a sprayer load; Montana State’s advice for ATVs on a hill is to lean your body uphill, and body position does not guarantee protection against a rollover. In a UTV, stay properly restrained inside the vehicle and follow its manual’s slope limits. Research on ATV injuries has linked uphill travel to backward rollovers (4).
USGS puts clean water at about 8.3 pounds per gallon, so 15 gallons of water alone is about 125 pounds before the tank, the pump and the hose. That is for water only, and the rack and tow limits in your vehicle’s owner’s manual set what it may carry.
Label, Protective Gear and Who May Spray
Master Manufacturing’s manual says that to operate this sprayer you must be 16 years of age or older, and that pesticides are extremely toxic to children. I add the kit rule: an adult who has read the manual and the label, never anyone tired or impaired. The rest of this section is about the product in the tank, which the label controls.
The Label
The product label is the law. It tells you what protective equipment to wear, how and where you may use the product, what weather it allows, how long to stay out of the treated area, how long to wait before you harvest, how to protect bees and other pollinators, and how to dispose of leftover product and the empty container. Using a registered pesticide in a way its label does not allow is against federal law. Your sprayer’s manual does not replace the label, and the label does not replace the manual: read the label before you open the container, and follow both.
Protective Equipment
Wear the protective clothing and equipment the product label requires, and put it on before you open the container. Wear the eye protection and gloves the label names every time you mix, load, spray, clean the tank or clear a nozzle. Cornell’s pesticide safety program also advises chemical-resistant gloves, goggles and a respirator when you handle moderately toxic products, even when the label does not call for them. Wear every respirator the label requires, of the type the label names, and follow the respirator maker’s instructions for fit, use and care. If you follow Cornell’s advice and wear one the label does not require, or if it is unclear which respirator or filter is right, get qualified guidance on the respirator and filter before you handle the product. Protective equipment lowers your exposure; it does not make spraying safe.
The manual says to always wear the protective equipment the chemical label directs and adds rubber gloves for the suction strainer, chemical resistant gloves for twisting the nozzle, and gloves and eye protection when you drain pesticides. A critical review of agricultural pesticide use found that the real-world protection of protective equipment may be over-estimated (5), and a systematic review found that goggles and gloves were worn less often than long sleeves and trousers (6). Both studies concern agricultural handlers, not home gardeners, so I read them as one more reason to wear every item the label names.
Dedicated Sprayer
Illinois Extension advises a dedicated sprayer for the home orchard, one that has never been used for weed control products. Penn State and Iowa State warn that even small amounts of herbicide left in tanks, hoses, screens and fittings can harm crops, and that water alone is generally not enough to remove pesticide residue. Treat a sprayer that has held weed killer as a weed-killer sprayer, and keep a separate one for fruit trees, vegetables, ornamentals and liquid fertilizer.
Drift and Bystanders
Drift is the part of spraying you cannot see from the seat. The manual says never to spray when wind exceeds 4 MPH and always to keep the work area clear of people and pets, and the extension figures below are looser than that.
Wind and Drift
Drift is spray carried off target by the air, and wind speed is the factor extension sources stress most. Their figures differ and none fits every situation, and your product label may be stricter than all of them. K-State Extension suggests spraying when the wind is under 10.1 miles per hour and says there is no maximum wind speed that fits every situation. LSU AgCenter says to avoid applying when the wind is above about 10 miles per hour. NC State says under 5 miles per hour when you calibrate with the product in the tank. Cornell gives no number and says not to take a chance by spraying in the wind. Do not spray during a temperature inversion, when cool air near the ground holds small droplets in the air, and do not assume that calm air, early morning or evening is suitable: check the actual conditions and follow every weather restriction on the product label. High temperature and low humidity make spray evaporate faster. Do not spray just before rain. Droplets smaller than about 150 micrometers drift most easily, and higher pressure makes more of them.
K-State’s author adds that droplets over 150 microns resist evaporation much more than smaller ones and that wind speed is usually the most critical weather condition (7). His figures come from field and boom sprayers, so I treat them as extension guidance and keep the manual’s 4 MPH and the label’s wording ahead of them.
Children, Pets and Others
Keep children, pets and other people out of the area while you mix, load and spray, and keep them off the treated area for as long as the label says. Before you spray, remove toys and take away or cover pet food and water dishes.
If Someone Is Exposed
If someone is exposed to a pesticide, follow the first-aid section of the product label and call Poison Control at 1-800-222-1222, and keep the product label with you. Call 911 in an emergency.
Cleaning, Storage and Care
Before you do any of this, complete the full shutdown for your sprayer in the shutdown box above. Do it before you flush the tank, the strainer or the hose, and wear the protective equipment the label and the manual require.
The maker’s manual says to flush the sprayer per the chemical manufacturer’s recommendations and not to store it with chemicals in the tank, because that is unsafe and could also damage it. For end-of-season storage it says to run RV anti-freeze through the system, and it warns that letting the sprayer freeze without the proper winterization steps voids the warranty.
Cleaning
Before you clean the sprayer, complete the applicable full shutdown in the shutdown box, including its emergency exception, and wear the protective equipment the label and your manual require. Clean the sprayer as soon as you can after use, because dried product is harder to remove than product still in solution. Empty the tank, rinse the tank, hose, wand and nozzle, and clean the strainers and screens, following the product label and your manual; extension guidance warns that water alone may not remove every product. Clean it away from desirable plants, wells and other water, and wash the outside. Do not pour leftover product or rinse water down a sink, a toilet or a storm drain, or onto bare ground.
Container Rinsing and Disposal
Follow the product label’s instructions for rinsing the empty container, handling the rinse water and disposing of the container, and rinse only a container the label directs you to rinse. Add rinse water to a spray mixture only when the label permits it and the mixture can take it without exceeding the permitted fill level or changing the label-directed mixture. Never reuse an empty pesticide container for any purpose. For leftover product, follow the label’s disposal steps, or call your state pesticide agency or a household hazardous waste program.
Storage
Before you store the sprayer, complete the applicable full shutdown in the shutdown box, including its emergency exception. Store pesticides in their original containers, with the label on, locked up or under the control of a person who can keep others away, and out of the reach of children. Never put a pesticide in a container used for food, drink or household products. Keep pesticides away from food, animal feed and protective equipment, and store pesticides and fertilizers apart, because they can react with each other and start a fire. Store the sprayer drained, cleaned and dry, as your manual describes, with the battery stored as the battery manual describes.
After the water test I drained the tank through the drain cap with its gasket, then looked for water left around the strainer and the pump fitting. Check every fitting during that clean-water run, not on the first product day.
Common Problems and What to Check
Before you start any of this work, complete the full shutdown for your sprayer in the shutdown box above. The manual’s troubleshooting table covers four problems you can meet with this sprayer, and it says not to attempt a repair until the tank is emptied and flushed and the power is disconnected.
- Pump runs backwards: The clamps are on opposite posts, so swap them to the posts the manual names after the full shutdown.
- Pump does not run: The manual’s cause is a blown fuse and its fix is to replace it; confirm the right replacement fuse with Master Manufacturing before you do.
- Weak or no flow: The manual points to a clogged suction strainer or intake tube, with the fixes “Remove Obstruction” and “Clean Suction Strainer”.
- Pump leaks: The manual names loose fasteners or degraded pump seals as the causes. The manual’s parts list names the Master Mfg spot sprayer parts you may need, such as the drain cap gasket, the tethers and the hose clamps.
After any leak, a pump that runs without delivering, or pressure that pulses or drops, stop, complete the full shutdown, find the cause and repair any damage. Resume only when the manual’s conditions are met, and after any repair test for leaks with clean water one final time before use.
Who It Suits and Who Should Skip It
I recommend this sprayer to owners who already run a vehicle with a rack and want a plain hand-gun unit. The lists below are short on purpose.
- Suits you if: you spot spray from a parked vehicle or on foot beside it, and you can wire a 12V supply the way the manual says.
- Suits you if: you want a 15-gallon tank with a 5 in lid and a two-year parts warranty in the manual.
- Suits you if: you do not need a regulator or a gauge for the job.
- Skip it if: you want a battery sprayer, because this unit has no battery and no charger.
- Skip it if: you want a boom, a regulator or a gauge, which the manual reserves for boom-ready and broadcast units.
- Skip it if: you want a mounting kit in the box, because the maker sells those separately.
Drawbacks and Limits
The honest limits start with the mounting. The sprayer ships without a rack, straps or boom, and the manual gives no vehicle weight, slope or speed rule, so the vehicle’s owner’s manual and your own training set the load. The 40 PSI is a ceiling, and with no regulator or gauge on this model, the nozzle is where I look first when the spray changes.
A second limit is the wiring. The harness ends in alligator clamps, and swapping them gives you a pump that runs backwards, so I mark the red and black ends of the harness before I go near the battery. Last, a full 15 gallons is heavy, and the maker prints no tank weight, which is why the USGS water figure above matters.
How It Compares With Alternatives
Two other 12V units sit in the same Powered Sprayers group, and the table below lines up the figures each maker prints. The pressure numbers are each maker’s ceiling and are not ranked against one another.
| Model | Tank | Pressure, maker’s ceiling | Warranty |
|---|---|---|---|
| Master Mfg SSN-01-015A-MM | 15 gallons | Up to 40 PSI | Two years, parts only |
| Chapin 97200E | 15 gallons | Up to 60 PSI | One year |
| Ironton 5 gallon (manual model 99914) | 5 gallons | Up to 40 PSI | 90 days, parts only |
Chapin 97200E
The Chapin 97200E EZ Mount 15-Gallon 12V Spot Sprayer is a 15-gallon unit like this one. According to Chapin’s manual, its pump has a pressure switch that shuts the pump off at 60 PSI, and the warranty is one year after purchase. Pick the Chapin if the pump cutoff matters to you; pick the Master if you want the two-year parts cover. My Chapin versus Master spot sprayer comparison lines up the two 15-gallon units side by side.

Ironton 5-Gallon 12V Spot Sprayer
The Ironton 12-V ATV Spot Sprayer, 5 Gallon holds 5 gallons, and Ironton’s manual for the 99914 lists a dry weight of 10 pounds and a 90-day consumer warranty. Pick the Ironton for small spot jobs where its smaller 5-gallon tank is enough; pick the Master when you want 15 gallons per fill. My Master versus Ironton spot sprayers comparison covers which 12V unit fits your ATV.

My Final Verdict on the Master Mfg 15-Gallon Spot Sprayer
I recommend the Master Mfg SSN-01-015A-MM to anyone with a vehicle rack who wants a plain 15-gallon spot sprayer on a 12V clamp supply. The tank, the 5 in lid, the trigger gun with its lock and the two-year parts warranty are the reasons. Skip it if you need a battery sprayer, a regulator and gauge, or a mounting kit in the box. The product label and this manual decide the equipment, the weather and the cleanup, and the shutdown box comes before every hands-on job. That is where my Master Manufacturing spot sprayer review lands: a clear yes for a vehicle-rack spot job, and a no for anyone who wanted a battery unit. My roundup of the best ATV spot sprayers sets five 12V picks beside their tank, pump and hose specs.
Frequently Asked Questions
What is the Master Mfg 15-gallon spot sprayer SSN-01-015A-MM?
The Master Mfg 15-gallon spot sprayer SSN-01-015A-MM is a 12V vehicle-supply spot sprayer for ATVs, UTVs and other racks. According to the maker, it pairs a 15-gallon polyethylene tank with an Everflo 12V pump rated 1.0 GPM with a separate ceiling of up to 40 PSI, a 15 ft hose and a trigger gun with a lock.
How do you power the Master Mfg 15-gallon spot sprayer?
You power the Master Mfg 15-gallon spot sprayer from a vehicle battery through its 8 ft harness with alligator clamps, and no battery comes in the box. After the full shutdown in the shutdown box above, the manual says to clamp red to the positive post and black to the negative post, since reversed clamps run the pump backwards.
What comes in the box with the Master Mfg 15-gallon spot sprayer?
The Master Mfg 15-gallon spot sprayer comes with the tank, lid with tether, spray gun, hose, 12V wire harness, drain cap with gasket and tether, gun clip kit and hose clamps. A rack, straps, a mounting kit, tools and thread-seal tape are not included, and some small parts ship inside the tank.
What does the Master Mfg 15-gallon spot sprayer reach with its hose?
According to Master Manufacturing, the 15-gallon spot sprayer reaches 18 ft vertical and 20 ft horizontal with its 15 ft hose and trigger gun. That is the maker’s figure, not a result, and Montana State advises not to ride and spray if you have to hold a wand or lance.
Which pump does the Master Mfg 15-gallon spot sprayer use?
The Master Mfg 15-gallon spot sprayer uses an Everflo 12-volt on-demand diaphragm pump, which the maker rates at 1.0 GPM, with a separate ceiling of up to 40 PSI. Treat the 40 PSI as a ceiling, not a setting, and read the pump line in the manual before you order a replacement pump or any other part.
References
- Proulx R. Spray Equipment and Calibration. AE73. North Dakota State University Extension; revised October 2025.
- Blanco LE, Aragon A, Lundberg I, Liden C, Wesseling C, Nise G. Determinants of dermal exposure among Nicaraguan subsistence farmers during pesticide applications with backpack sprayers. Ann Occup Hyg. 2005;49(1):17-24.
- Nuyttens D, Baetens K, De Schampheleire M, Sonck B. Effect of nozzle type, size and pressure on spray droplet characteristics. Biosyst Eng. 2007;97(3):333-345.
- Brandenburg MA, Brown SJ, Archer P, Brandt EN. All-terrain vehicle crash factors and associated injuries in patients presenting to a regional trauma center. J Trauma. 2007;63(5):994-999.
- Garrigou A, Laurent C, Berthet A, et al. Critical review of the role of PPE in the prevention of risks related to agricultural pesticide use. Saf Sci. 2020;123:104527.
- Sapbamrer R, Thammachai A. Factors affecting use of personal protective equipment and pesticide safety practices: a systematic review. Environ Res. 2020;185:109444.
- Wolf RE. Strategies to Reduce Spray Drift. MF-2444. Kansas State University Agricultural Experiment Station and Cooperative Extension Service; March 2000.
Safety Note: Read your sprayer’s manual and the product label before you open any container. The label is the law: it tells you what protective equipment to wear, how and where you may use the product, what weather it allows, how long to stay out of the treated area, how long to wait before you harvest, how to protect bees and other pollinators, and how to dispose of leftovers and the empty container. Using a registered pesticide in a way its label does not allow is against federal law. This page never gives an amount of product, a dilution or a mixing order: the label does. Wear the protective clothing and equipment the label requires, put it on before you open the container, and wear the eye protection and gloves it names whenever you mix, load, spray, clean the tank or clear a nozzle. Protective equipment lowers your exposure; it does not make spraying safe. Wear every respirator the label requires, of the type it names, and follow the respirator maker’s fit, use and care instructions. Before you clean or store the sprayer, or wire a 12V pump, complete the shutdown below first. Before you mix or load, complete the shutdown below, including its emergency exception. Mix and load outdoors, away from other people (including children), pets and livestock, and where a spill cannot reach a well, a drain or other water. Stand upwind, never use your mouth to siphon a product, keep the fill hose above the liquid so it cannot siphon back into your water supply, and never leave the sprayer unattended while you fill it. Mix only what the job needs, and do not store leftover mix in the sprayer. Never point the wand at yourself, another person or a pet, and never test a spray against your hand. Emergency first: if a battery becomes unusually hot, swells, hisses, gives off an unusual odor or smokes, stop using the sprayer without handling or removing the battery, keep people away and follow the battery manual’s emergency instructions; if it smokes, burns or presents immediate danger, move away and call 911 or the fire department without finishing the routine shutdown. Otherwise, before you open the tank, fill it, change or clean a nozzle, clear a clogged nozzle, clean or rinse the sprayer, adjust or repair anything, charge or change the battery, load, unload, transport, store or leave the sprayer, or lift, put on or take off a backpack unit, complete the shutdown. During normal spraying, move only as your manual and the product label permit, and never ride while operating a hand-held wand or lance. Battery sprayer: release the trigger or close the wand valve, then switch the pump off. Relieve all trapped pressure using only your exact manual’s procedure and a discharge destination consistent with the product label, without opening the tank or loosening any part beforehand unless that procedure expressly requires it, and never toward yourself, another person or an animal. Then remove the battery. 12V vehicle sprayer: first stop and secure the vehicle as its manual directs, then release the trigger, close the wand or boom valve and switch the pump off. Relieve all trapped pressure using only your exact manual’s procedure and a discharge destination consistent with the product label, without opening the tank or loosening any part beforehand unless that procedure expressly requires it, and never toward yourself, another person or an animal. Then disconnect the pump’s 12V supply at the connection your manual specifies, and reconnect it only after the work is complete, every part is secured and the pump switch is off. Wear the label’s protective equipment while you clean the tank, the strainer or a nozzle. Clear a clogged nozzle only with the method in your exact manual, never with your mouth and never by blowing into it. Refit every part and check for leaks with clean water before product goes back in. For the first water test, complete the shutdown first, fill the tank with clean water and close it as your manual directs, connect the power only when you are ready, and watch the wand, hose, fittings and tank seams for leaks without touching pressurized parts; complete the shutdown again before you open the tank, fix a leak or add product. Wind, heat and fine droplets carry spray off target: the label may be stricter than any extension guideline, and extension sources give different wind figures, so no single number fits every situation. Do not spray during a temperature inversion, and do not assume that calm air, early morning or evening is suitable. Do not spray just before rain. Keep children, pets and other people out of the area while you spray and off the treated area for as long as the label says, and remove toys and cover pet food and water dishes first. The label’s pollinator wording decides when you may spray around flowering plants, and early morning or evening is not automatically suitable. A sprayer that has held weed killer should stay a weed-killer sprayer: extension services advise a dedicated sprayer, and rinsing may not remove every residue. Follow the product label’s instructions for rinsing empty containers, handling rinse water and disposing of them, and never reuse an empty pesticide container; for leftover product, call your state pesticide agency or a household hazardous waste program, and never pour it down a sink, a toilet or a storm drain. Store pesticides in their original containers, locked up and out of the reach of children, away from food and animal feed, and keep pesticides and fertilizers apart. If someone is exposed, follow the first-aid section of the label, call Poison Control at 1-800-222-1222 and keep the label with you; call 911 in an emergency. If product spills, keep people and animals away and follow the label’s emergency directions; try to contain a small spill only if the label says that is safe and you have the protective equipment it requires, and otherwise get help (the emergency number on the label, Poison Control if anyone is exposed, 911 for a fire, immediate danger or a large spill). Use only the battery and charger the maker supplies or lists for your exact sprayer, charge and store the battery as your manual describes, and do not use a damaged battery or charger: lithium-ion batteries can overheat and catch fire. Wire a 12V pump the way your manual says and use the fuse it lists. On an ATV or UTV, wear the helmet and protective gear the Consumer Product Safety Commission recommends, get hands-on training, sit only in the positions the manufacturer designed, never ride with more passengers than there are seats, and in a UTV fasten the seat belts and keep every part of your body inside the vehicle; stay within the rack and tow capacity in your vehicle’s owner’s manual, and remember that sloshing liquid shifts weight and changes how the vehicle handles; Montana State University Extension advises against riding and spraying if you have to hold a wand or lance. Stop at once, complete the full shutdown and inspect if the sprayer leaks, loses pressure or runs without spraying, and restart only as the manual allows. If a battery becomes unusually hot, swells, hisses, gives off an unusual odor or smokes, do not handle or remove it: keep people away, follow the battery manual’s emergency instructions, and if it smokes or burns, move away and call 911 or the fire department. Before you fill the tank, complete the shutdown, and fill it only to the level your manual allows. Carrying a full tank is tiring: rest when you are tired.


