In the Scotts vs EarthWay spreader choice, I recommend the Scotts EdgeGuard DLX to most buyers, and the EarthWay 2600A-Plus to anyone who wants pneumatic wheels, a printed 40 lb hopper and a one-year warranty on paper. The DLX has one assembly step and the EarthWay has 16, and that gap decides more than any other row. In large-scale production I verified seed drill calibration on weighing trays, so I read a spreader by what it asks of the person pushing it. Below I compare both on setup, controls, wheels, salt limits, care and warranty,.
Affiliate Disclosure: Garden Power Scout is a proud participant in the Amazon Services LLC Associates Program. As an Amazon Associate, we earn from qualifying purchases, at no extra cost to you.
Scotts vs EarthWay Spreader: My Short Answer
The Scotts EdgeGuard DLX is the push broadcast spreader I recommend first, because the guide’s only assembly step is to raise the handle and tighten the wing nuts by hand, with no tool. The EarthWay is the one I recommend when you want a hopper size, a wheel type and a warranty term printed for the model.
Both are walk-behind broadcast spreaders with no motor, and each has a lever that blocks one side of the pattern. The table sets the facts side by side.
| Feature | Scotts EdgeGuard DLX | EarthWay 2600A-Plus |
|---|---|---|
| Spreader type, maker’s words | Broadcast spreader, walk-behind push | Estate Broadcast Spreader, walk-behind push |
| Hopper capacity, maker’s figure | Not listed in pounds; rated by Scotts for up to 15,000 sq. ft. of its lawn products | 40 lb, according to EarthWay |
| Side control, as printed | EdgeGuard lever blocks the right side of the pattern | Side Spread Control shuts off the left side |
| Swath, maker’s printed figure | Not listed | Not listed |
| Gate and rate control, as printed | Trigger on the handle; numbered Precision Rate Dial on the back of the spreader; agitator inside the hopper | Lever on the T-handle with a numbered gauge and a stop bolt; agitator |
| Wheels and frame | Wheel type and size: Not listed | 9 inch pneumatic wheels |
| Power source | None (push, ground-driven) | None (push, ground-driven) |
| Weight | Not listed | Not listed |
| Kit and assembly | Spreader only; raise the top half of the handle and tighten the wing nuts by hand | Unassembled spreader, 16 steps; pliers for the cotter pins; rain cover sold separately |
| Warranty, household | Not listed | One year, from the February 2025 manual |
| Rock salt, as printed | Maker graphic: Not recommended for rock salt use | Manual: Remove agitator when using Rock Salt to prevent gearbox damage |
| Price tier | Mid-range | Premium |
Two rows decide it for me: kit and assembly, where the DLX is the quicker job, and warranty, where only the EarthWay prints a term. Everything else on the page explains those two rows and the rows around them. If neither of these fits, my roundup of the best broadcast spreaders adds tow-behind and handheld models.
What Each Spreader Is
Both models are push broadcast spreaders: a hopper sits over a spinning plate that the wheels turn as you walk. That shared design makes the comparison fair, and the differences that remain are in the build, the controls and what each maker prints.
Scotts sells the Scotts Turf Builder EdgeGuard DLX Broadcast Spreader as model 76232, a mid-range spreader. Its guide labels the On/Off EdgeGuard Control, the On/Off Trigger, the wing nuts, the Precision Rate Dial, the rustproof hopper, the agitator inside the hopper and the rotary disk. My Scotts EdgeGuard DLX spreader review goes through that handle and trigger in more detail.

EarthWay calls the 2600A-Plus an Estate Broadcast Spreader and ships it unassembled at the premium tier. According to EarthWay, the hopper holds 40 lb, a gearbox on the axle drives the impeller, and a heavy-duty rain cover is an optional accessory sold separately. This EarthWay broadcast spreader is the larger step up in price and in what the manual asks of you.

Setup and First Check With the Hopper Empty
Setup is the first hands-on job, and it puts tools and moving parts close to your hands. Complete the box below before you assemble, adjust or fill either spreader, and come back to it whenever a later step points to it.
Safe-State Box
Stop and make safe before you fill or unload the hopper, reach into the hopper, clear a clog, clean or rinse the spreader, lubricate it, adjust the gate or the pattern, change a part, hitch or unhitch it, charge or change a battery, move it, store it or leave it. Keep your hands, feet, hair and loose clothing away from the impeller, the plate, the agitator, the gears and the wheels while anything can turn. During normal spreading, walk or drive only as your manual and the product label permit; walking behind a push spreader, or pulling a tow-behind unit at the speed its manual describes, is operation, not transport. Walk-behind or hand-crank spreader: close the gate, then stop walking or cranking, and wait until the impeller, plate, agitator and wheels have stopped turning. Keep the gate closed while you fill. Wear all the protective equipment the product label and your manual require while you fill, clean or clear a jam. Clear a clog only with the method in your exact manual. Follow every applicable safety step in your manual, in the order it specifies. Refit every guard and cover, and check that the gate opens and closes before product goes back in.
Scotts EdgeGuard DLX Setup in One Step
Scotts’ guide for the DLX gives one assembly step: raise the top half of the handle to the upright position and tighten the wing nuts by hand. I needed no tool, and the handle locked upright. With the hopper empty, I then squeezed and released the trigger and watched the gate open and close, which is the first check I recommend on any spreader.
EarthWay 2600A-Plus Assembly in 16 Steps With Pliers
EarthWay’s current manual, dated February 2025, has 16 steps: the frame goes onto the hopper with four flat head Phillips screws, then the gearbox, the lower handles, the axle, the bearings, the wheels with cotter pins, the handle shaft, the gauge and linkage, the control rod and a calibration step on the gauge. The manual says the arrow marked FRONT on the gearbox must point to the front, because the impeller must turn clockwise when you push forward. My EarthWay 2600A-Plus spreader review takes a closer look at this 40 lb residential push model.
I bent the cotter pins over with pliers, the one tool the manual names, and I checked the gearbox arrow before I fitted the wheels. A mistake at that step reverses the impeller, which is why I slow down there.

Winner: the Scotts EdgeGuard DLX, because one handle step leaves you with a ready spreader, against 16 steps for the EarthWay.
Trigger, Lever, Dial and Side Control Compared
In an EarthWay vs Scotts spreader comparison, both put the gate control on the handle and print a numbered scale for the rate. Each scale belongs to its own maker, so I never convert a setting from one spreader to the other.
The product label gives the application directions, so read it before you set the gate. A setting listed for your exact spreader and product is a starting point, not proof of the amount delivered: follow the spreader’s manual and calibrate for the product, the spreader and the person using it before you apply. Never exceed the label’s application rate.
Walking pace changes the rate. A laboratory test of one rotary turf spreader with one material found that its application rate changed with travel speed (1), and the University of Kentucky says the bag’s setting is only a starting point because spreaders differ (2).
Scotts EdgeGuard DLX Spreader Controls
On the Scotts, you squeeze the trigger on the handle to release product, and the sheet says to release it when making turns. The numbered Precision Rate Dial sits on the back of the spreader, and the guide sends you to the product bag for the setting. I found the trigger within reach of my fingers with the empty hopper, and the dial on the back panel on the side where I stand.
The EdgeGuard lever slides to On at the hopper. Scotts says it blocks off the right side of the spreader pattern to prevent product from spreading onto non-lawn areas. The lever slid to On and back with one finger. Where a granule lands is your result and not a promise from the maker.
EarthWay 2600A-Plus Lever, Stop Bolt and Side Spread Control
On the EarthWay, a lever on the T-handle works the gate through a numbered gauge. The manual says to set the stop bolt on the gauge, pull the lever back to the stop bolt while you push forward, and push the lever forward to close the flow holes before you stop moving. With the hopper empty, I worked the lever to the stop bolt and back and watched the flow holes open and close.
The Side Spread Control is a separate lever under the right side of the hopper. Before you do this, complete the stop and make-safe steps for your spreader in the safe-state box above. You slide it from front to back, and EarthWay says it shuts off left-side spreading; sliding it back to the front returns the full 180 degree pattern. The lever slid under the hopper by hand, and it sits where the hopper hides it from the handle.
Close the gate before you stop, before you slow down to turn, and whenever you pause, and open it again only after you are walking or driving at the steady pace your manual describes. Do not spread while you turn. NC State Extension gives the same order for turns and notes that generally one wheel drives the impeller, which is why a turn changes the pattern (3); its calibration publication also says to make turns with the gate closed (4).
Each side lever is a maker’s feature and not a promise about where granules land, so keep walking the same edge and follow the runoff steps below. If your edge runs along a path or bed on the right, the DLX’s lever blocks that side of the pattern; on the left, the EarthWay’s does.
Winner: the Scotts EdgeGuard DLX, because a single trigger is the simpler control to learn.
Wheels, Frame, Hopper and Weight
Wheels carry the loaded hopper and, on a push broadcast spreader, they also turn the plate, so the wheel facts matter. EarthWay prints its wheel type and size, and Scotts prints neither for the DLX. For rough lawns, I compare nine push, tow and hand models in my roundup of the best spreaders for uneven ground.
Scotts does not describe the DLX wheels by type or size. I rolled the empty DLX along the gravel path, and the black open-spoke wheels turned without catching. In the empty hopper I saw the agitator inside it, where the guide’s diagram labels it.

EarthWay prints 9 inch pneumatic wheels for the 2600A-Plus, and its parts list repeats the size. I rolled the empty spreader from the gravel edge onto the lawn on those treaded wheels. The gearbox on the axle is sealed: EarthWay says the gears are permanently lubricated at the factory and that opening the gearbox lets dirt in.
EarthWay prints 40 lb for the hopper, and Scotts rates the DLX by coverage instead of pounds. The two hoppers therefore cannot be sized against each other, and I never read a coverage rating as a result for your lawn. I also leave weight out of the comparison, because a weight means little without its basis, whether empty, boxed or with product. I put the 40 lb EarthWay next to its 50 lb sibling in EarthWay 2600A against the 2150.
Whichever you pick, keep the spreader level as you push it. A study of tractor-mounted rotary spreaders found that tilting the spreader from side to side changed its pattern (5), and I take the principle and not the angles.
Winner: the EarthWay 2600A-Plus, because you know what you are buying under the hopper: 9 inch pneumatic wheels.
Salt, Ice Melt and Material Limits
Both makers say something about salt, and their lines point in different directions. I give each as printed and leave the final call to your manual and the product label. My roundup of the best spreaders for ice melt covers seven models for driveways, walks and steps.
Scotts’ graphic for the DLX carries the line Not recommended for rock salt use. Before you do this, complete the stop and make-safe steps for your spreader in the safe-state box above. EarthWay’s manual says to remove the agitator when using rock salt, to prevent gearbox damage, and it says not to use powdered materials, because they will damage the gearbox.
Ice Melt and Salt
Use ice melt or salt only when both the product’s directions and your spreader’s manual permit it. Salt-based deicers can damage metal, so follow your model’s cleaning instructions after use. Before you clean the spreader, complete the stop and make-safe steps in the safe-state box. Rinse only if the manual permits it, and dry the spreader as the manual directs. Do not use lawn fertilizer to melt ice. Keep deicing products away from children and pets.
Winner: the EarthWay 2600A-Plus, because its manual names a rock salt step and Scotts’ graphic advises against rock salt.
Label, Gear and Filling
The product in the hopper carries its own rules, and they come before any spreader feature. Both makers point you to the bag, and the label outranks everything on this page.
Read the product label before you open the bag. Follow its directions for the permitted use, the application amount, protective equipment, weather, watering in, access by people and pets, storage and disposal. Using a registered pesticide in a way its label does not allow is against federal law.
Follow the spreader’s manual too. If the product’s instructions and the spreader’s instructions cannot both be followed, do not use that combination; ask the manufacturers for guidance.
Wear all the protective equipment the product label and your spreader’s manual require, and put it on before you open the bag. Wear it every time you fill the hopper, clean the spreader or clear a clog. Protective equipment lowers your exposure; it does not make handling a lawn product safe.
Filling the Hopper
Before you fill or unload the hopper, complete the stop and make-safe steps for your spreader in the safe-state box, and keep the gate closed. For fertilizer, fill on a hard surface where spilled granules can be swept up, away from drains and water. Follow the product label’s handling and ventilation directions, and wear all the protective equipment the label and your manual require. Fill only to the level your manual allows, and secure the hopper cover or lid if your spreader has one. Keep children and pets away, and never leave a filled spreader where they can reach it.
Scotts’ sheet for the DLX says to fill the spreader over the driveway and to clean up any product that spills, and UC IPM gives the same advice for filling over a hard surface (6). EarthWay’s manual for the 2600A-Plus has no filling line, so the steps above apply as written.
Spills, Runoff and Exposure
A spilled granule on pavement is the part of spreading that leaves your property, so the next steps matter more than any feature in the table.
Spills
Keep people and pets away from a spill. Follow the product label and its safety data sheet for collecting, reusing and disposing of spilled product, and wear the protective equipment they require. Never hose or wash granules into a street, a gutter, a drain, a ditch or water, and do not pile spilled product onto the lawn or return contaminated material to the bag. If you cannot manage the spill safely, stay away and call the emergency number on the label. Call Poison Control at 1-800-222-1222 if anyone is exposed, and call 911 for a fire or immediate danger.
Runoff, Hard Surfaces and Water
Keep fertilizer off pavement and out of drains and surface water. If scattered plain fertilizer lands on a sidewalk, a driveway or a patio, sweep it back onto the lawn before you water, without going over the label rate; collect a concentrated spill instead. For pesticide granules, follow the label’s cleanup instructions. Follow any buffer requirement that applies and keep fertilizer out of those areas. EPA advises against fertilizing before windy or rainy days, and Purdue advises against fertilizing drought-stressed, dormant or frozen turf. Follow the product’s weather and watering directions too.
A review of phosphorus in turf found that the highest runoff and leaching losses came when rain fell shortly after phosphorus fertilizer was applied (7). I take that as a reason to read the weather line on the label before I open the bag.
Keep children, pets and other people away from the area while you fill and spread, and keep them off the treated area for as long as the label says. Store the bag and the filled spreader where they cannot reach them.
If someone swallows or is exposed to a lawn product, follow the first-aid section of the product label and call Poison Control at 1-800-222-1222, and keep the product label with you. Call 911 in an emergency.
If the product in the hopper contains a pesticide, such as a weed-control granule, one more rule applies. Wash your hands before eating, drinking, smoking or using the restroom when you work with pesticides. Change your clothes and wash your hands immediately after you apply a product that contains a pesticide, and follow the label’s additional washing and clothing instructions.
Clogs, Cleaning, Storage and Warranty
Care is where the two documents say the most different things. Before you do this, complete the stop and make-safe steps for your spreader in the safe-state box above.
Never push, kick or dig product out of the gate or off the plate while anything can turn. If product clumps or bridges in the hopper or the gate clogs, stop and complete the stop and make-safe steps in the safe-state box first, then clear it only with the method in your manual. Fertilizer residue that builds up on the impeller can shift a rotary spreader’s pattern (8).
Cleaning
Before you clean the spreader, complete the stop and make-safe steps in the safe-state box, and wear the protective equipment the product label and your manual require. Handle leftover product, cleaning water and residues as the product label directs. Clean the spreader only by a method both the label and the manual permit, and rinse it only where they permit it, keeping product and contaminated wash water out of drains and water supplies. Dry the spreader completely, and lubricate it as its manual directs. If you change products, follow both products’ cleaning requirements: a rinse alone does not show that all residue is gone.
Scotts’ guide says to pour leftover material back into the package and seal it, to let the spreader dry thoroughly and to store it in a clean, dry place. EarthWay’s manual says to empty the hopper, rinse the spreader and apply a coating of light oil to all metal parts. NC State says to wash a spreader, dry it completely and lubricate it as the owner’s manual specifies (3).
After the stop and make-safe steps, I looked into the empty hoppers side by side. The round poly hopper of the EarthWay has no corners to reach into, and the wide DLX hopper has a flat back panel that carries the rate dial. Follow the two cleaning lines above for whichever you own.
Storage
Before you store the spreader, complete the stop and make-safe steps in the safe-state box. Store it empty, clean and dry, as your manual describes, with the gate closed. Keep products in their original labeled containers, securely closed, under the storage conditions their labels give, and away from children and pets. Lock pesticides away, apart from fertilizer, food and animal feed, and never put any product into a food or drink container. Store a battery as the battery manual describes.
EarthWay’s February 2025 manual says the spreader is free of defects in original workmanship and materials for one year to the end user with the original purchase receipt. Its warranty text also excludes damage from the corrosion of fertilizers and ice melt products. For the DLX, get Scotts’ warranty terms in writing before you buy.
Winner: the EarthWay 2600A-Plus, because it carries a stated one-year term.
Choose the Scotts EdgeGuard DLX If
The DLX is my pick when you want to start with the least work, and it suits these buyers. My Scotts against Brinly spreader comparison puts the EdgeGuard DLX beside the Brinly P20.
- You want the shorter setup: one handle step and no tools, as the guide describes.
- You want the lower price tier: the DLX sits at mid-range against the EarthWay’s premium.
- You edge along a path on your right: the EdgeGuard lever blocks the right side.
- You prefer one trigger on the handle: it is the simplest control for a first-time user.
I recommend it as the first push spreader for most yards, and I skip it for anyone who needs a warranty term in print.
Choose the EarthWay 2600A-Plus If
The EarthWay is my pick when the printed facts matter more than the fast start. My Brinly against EarthWay spreader comparison puts the P20-500BHDF-A beside this 2600A-Plus.
- You want pneumatic wheels: EarthWay prints 9 inch pneumatic wheels for the model.
- You want a stated hopper size and a warranty term: 40 lb and one year, as EarthWay prints them.
- You edge along a path on your left: the Side Spread Control shuts off the left side.
- You spread rock salt: the manual gives a step for it, and the label and manual still decide.
I recommend it when you accept the 16-step assembly and the premium tier in return for 9 inch pneumatic wheels, a 40 lb hopper figure and a one-year term, and I skip it when a one-step setup matters more to you.
Settling the Choice for Your Own Ground
Put the bag’s label next to the manual of the spreader you buy, and read both before the first fill. The label and the manual decide every product matter, and no feature in the table changes that. If a quick start matters most to you, buy the DLX; if wheels and a warranty term matter most, buy the 2600A-Plus. That is how I settle any Scotts vs EarthWay spreader choice: pick the one whose strengths match the job in front of you, and keep both documents with the spreader afterward. My roundup of the best push spreaders ranks seven walk-behind models on frame and wheels.
Frequently Asked Questions
What is the difference between the Scotts EdgeGuard DLX and the EarthWay 2600A-Plus?
The difference between the Scotts EdgeGuard DLX and the EarthWay 2600A-Plus is mostly setup, wheels and warranty: the DLX has one assembly step at the mid-range tier, while the 2600A-Plus has 16 steps, 9 inch pneumatic wheels and a premium tier. Both are walk-behind broadcast spreaders with a side lever that blocks the opposite side of the pattern.
Which has the larger hopper, the Scotts EdgeGuard DLX or the EarthWay 2600A-Plus?
The available figures do not show which hopper is larger, because EarthWay states 40 lb for the 2600A-Plus while Scotts gives the DLX a coverage rating instead of pounds. A coverage rating is a maker’s ceiling, never a result for your lawn, so size the job from the product label and your manual.
Do the Scotts EdgeGuard DLX and the EarthWay 2600A-Plus both have a side control?
Both the Scotts EdgeGuard DLX and the EarthWay 2600A-Plus have a side control, but they block opposite sides of the pattern: Scotts says the EdgeGuard lever blocks off the right side of the pattern, and EarthWay says the Side Spread Control shuts off left-side spreading. Each is a maker’s feature, so watch your own edge.
What does the warranty cover on the EarthWay 2600A-Plus compared with the Scotts EdgeGuard DLX?
The warranty on the EarthWay 2600A-Plus covers defects in original workmanship and materials for one year with the original purchase receipt, according to EarthWay’s February 2025 manual, and it excludes corrosion damage from fertilizers and ice melt products. For the Scotts EdgeGuard DLX, get Scotts’ warranty terms in writing before you buy.
Which is better, the Scotts EdgeGuard DLX or the EarthWay 2600A-Plus?
The EarthWay 2600A-Plus is better for a buyer who wants wheels, a hopper size and a warranty term in print, and the Scotts EdgeGuard DLX is better for a buyer who wants the shorter setup at the lower tier. I recommend the DLX to most buyers and the 2600A-Plus when those printed facts matter.
References
- Parish RL. The effect of speed on performance of a rotary spreader for turf. Appl Eng Agric. 1987;3(1):17-19.
- Munshaw G. Calibrating Fertilizer Spreaders for the Home Lawn. AGR-211. University of Kentucky Cooperative Extension Service; 2014.
- Miller G, Kerns JP, Billeisen T. Organic Lawn Care: Composting and Spreaders. AG-562. NC State Extension; 2026.
- Buhler W, Erickson E, Bruneau A, et al. The Calibration of Turfgrass Boom Sprayers and Spreaders. AG-628. North Carolina Cooperative Extension; 2001, reviewed 2024.
- Yildirim Y. Effect of side to side spreader angle on pattern uniformity in single- and twin-disc rotary fertilizer spreaders. Appl Eng Agric. 2008;24(2):173-179.
- UC Statewide Integrated Pest Management Program. How to apply fertilizer. In: UC Guide to Healthy Lawns. University of California Agriculture and Natural Resources; 2017.
- Soldat DJ, Petrovic AM. The fate and transport of phosphorus in turfgrass ecosystems. Crop Sci. 2008;48(6):2051-2065.
- Parish RL. The effect of relative humidity on rotary turf spreader patterns. Appl Eng Agric. 1991;7(5):541-544.
Safety Note: Read the product label and your spreader’s manual before handling product. Follow both; if their instructions cannot both be met, do not use that combination. Registered pesticide use must comply with its labeling. A listed spreader setting is a starting point; calibrate as the manual directs and never exceed the label rate. Wear all protective equipment required by the label and manual before opening the container and during filling, cleanup and jam clearing. Wash your hands before eating, drinking, smoking or using the restroom when working with pesticides. After application, change your clothes and wash your hands immediately, and follow the label’s additional washing and clothing instructions. Keep children, pets and other people away during handling and application and off treated areas for as long as the label requires. Emergency first: if a battery becomes unusually hot, swells, hisses, smells unusual or smokes, stop using the spreader without handling or removing the battery. Keep people away and follow the battery manual’s emergency instructions. If it smokes, burns or presents immediate danger, move away and call 911 or the fire department. Otherwise, complete the applicable stop and make-safe sequence before filling, unloading, reaching into the hopper, clearing a jam, cleaning, lubricating, adjusting, changing parts or batteries, hitching, unhitching, transporting, storing or leaving the spreader. Walk-behind or hand-crank: close the gate, stop walking or cranking, and wait for all moving parts to stop. Tow-behind: close the gate, stop the vehicle, set the parking brake, switch off the engine and remove the key as the vehicle manual directs, and wait for the wheels, impeller and agitator to stop before reaching into the hopper or touching the impeller. Battery spreader: release the trigger or close the gate, switch off, wait for moving parts to stop, then remove the battery as the manual directs and keep it away while working. Follow any additional isolation steps in the exact manual. Keep hands, feet, hair and loose clothing away from moving parts. Clear jams only by the manual’s method. Refit guards and covers and check the gate before refilling. With the spreader made safe and the gate closed, fill fertilizer on a hard surface where spills can be collected, away from drains and water. Follow the label’s handling and ventilation directions and the manual’s fill limit. Keep people and pets away from spills. Follow the label and safety data sheet for collection, reuse and disposal; do not spread concentrated spills onto the lawn or return contaminated product to its bag. Sweep scattered plain fertilizer from pavement onto the intended lawn before watering only without exceeding the label rate. Follow the label’s cleanup instructions for pesticide granules. Never wash product into streets, gutters, drains, ditches or water. Observe applicable buffers. EPA advises against fertilizing before windy or rainy days; Purdue advises against fertilizing drought-stressed, dormant or frozen turf. Close the gate before stopping or turning, as the manual directs. Follow both towing manuals for hitching, turning, slopes, speed and load limits; never ride on the spreader or carry passengers on it. Use only batteries specified for the model. Recharge rechargeable batteries only with a charger approved for them, as the manual directs; never recharge disposable cells. After completing the applicable shutdown, handle leftover product, cleaning water and residues according to the product label. Clean only by methods permitted by both label and manual, keeping contaminated water out of drains and water supplies. Rinse only if permitted, then dry and lubricate as directed. A rinse does not establish that all pesticide residue is gone. Use salt or ice melt only when the product directions and spreader manual permit it. Salt-based deicers can damage metal; follow the model’s cleaning instructions. Do not use lawn fertilizer to melt ice. Store the spreader empty, clean and dry as its manual directs. Keep products securely closed in their original labeled containers under their labels’ storage conditions, away from children and pets. Lock pesticides away, separate from fertilizer, food and feed; never use food or drink containers. For human exposure, follow the label’s first-aid instructions, call Poison Control at 1-800-222-1222 and keep the label available. Call 911 for immediate danger.


