A man standing beside a Solo 421 and a Chapin 8700G spreader on a patio

SOLO 421 vs Chapin 8700G: Two Chest-Mount Crank Spreaders Compared

Garden Power Scout Amazon Black Friday Banner

In the SOLO 421 vs Chapin 8700G choice, I recommend the SOLO 421 for most buyers and the Chapin 8700G for anyone who wants a padded quick-release strap and a printed one-year warranty. Both are hand-crank chest spreaders with no wheels and no battery. In large-scale production I verified seed drill calibration on weighing trays and checked sprayer nozzle output with calibration cylinders, so I read what a maker prints against what it leaves out. Below I compare hopper, controls, strap, materials and care, and I say who should skip each one.

Affiliate Disclosure: Garden Power Scout is a proud participant in the Amazon Services LLC Associates Program. As an Amazon Associate, we earn from qualifying purchases, at no extra cost to you.

Affiliate Disclosure: Garden Power Scout is a proud participant in the Amazon Services LLC Associates Program.

SOLO 421 vs Chapin 8700G: The Short Answer

The SOLO 421 is my pick for most buyers because its manual prints more of what you can check before you buy: a 20 lb capacity, an empty weight, a long list of hopper materials, and a directional lever with a deflector shield. The Chapin 8700G is the better call for a buyer who wants a padded quick-release strap, a spring-return gate lever and a one-year limited warranty.

SOLO 421 and Chapin 8700G side by side, as each maker prints it
Row SOLO 421 Chapin 8700G
Spreader type Chest-mount hand-crank broadcast spreader, called a portable spreader by SOLO Chest-mounted hand-crank spreader, called a chest spreader in Chapin’s manual
Hopper capacity, as printed 20 lbs, per the SOLO manual Not listed
Spread method and printed swath Hand-cranked impeller with a deflector shield and a three-position directional lever; no swath printed Hand-cranked spinner with a side baffle and a directional control; no swath printed
Gate and rate control Flow rate lever (zero is closed) with a flow limiter stop Spring-return gate lever that drops into slots for the maker’s opening sizes
Agitator and hopper cover Built-in agitator and a screw-on lid Agitator listed as gravity by Chapin; large green octagonal cap
Power source None, hand crank None, hand crank
Weight, with its basis 5.5 lb empty, per the SOLO manual 6.54 lb on the Amazon page, basis not stated
Kit and setup Crank handle and carry strap come inside the hopper and you fit both Preassembled except the crank handle; the manual names a 14 mm wrench
Warranty Not listed 1-year limited, per Chapin
Materials the maker names Manual lists ice melters, oil absorbers, seed, bird seed, sand, salt, cleaning agents, fertilizers, pelletized lime, feed stock and wild game feed Chapin’s page says not recommended for sand and sand mixes, lime, pelletized lime, lime mixes and rock salt

Two rows decide it: the materials each maker names and the setup. The product label and your spreader’s manual still decide what goes in the hopper, but SOLO’s printed list is the longer one and Chapin’s page carries a printed limit. On setup, the Chapin needs one part fitted and the SOLO needs two.

What Each Chest Mount Spreader Is

Here the hopper hangs on a strap in front of you, and you turn a crank with one hand while the other works the gate. It goes where a wheeled spreader will not, such as the edges of a house lawn and the narrow strips beside a vegetable plot. The SOLO 421 20-Lb Portable Chest-Mount Spreader is the SOLO 421 spreader in this comparison. SOLO prints Model 421 and sku 421-S, and the Amazon title ends in 421S, but all three names point to one spreader. I compare hand, battery and push models to find the best small lawn spreaders.

SOLO 421 chest-mount spreader with white hopper, black housing and side crank handle
SOLO 421 20-Lb Portable Chest-Mount Spreader

Shop on Amazon

It has a white hopper with a screw-on lid, a ribbed housing around a finned impeller, a crank on the left and a cross-shoulder strap. SOLO’s manual is the 10/2000 edition, so every SOLO figure here is the one that edition prints. I go through the hopper, crank and strap on their own in my full SOLO 421 spreader review.

The Chapin 8700G TurfPRO Chest-Mounted Spreader is the same class of tool with a different build. Chapin calls the 8700G a TurfPRO chest-mounted spreader, and the Chapin chest spreader carries a rigid translucent hopper, a green base with a white spinner disc, a padded shoulder strap and a gate lever on the right. Chapin’s manual says it arrives preassembled, with only the crank handle left for you to attach. The 8700G is a different model from the older 8700A. I rank seven crank and battery models for spot work to name the best handheld spreaders.

Chapin 8700G chest-mount spreader with white hopper, green octagonal cap and black shoulder straps
Chapin 8700G TurfPRO Chest-Mounted Spreader

Shop on Amazon

Safety First With the Label, Protective Equipment and the Safe-State Box

A chest spreader puts a turning impeller close to your hands and the product at chest height, and the granules in the hopper can be a lawn chemical that harms people, pets and water. I read the safety lines before the first fill, because SOLO prints a full set and Chapin’s printed instructions give only a few operating steps.

Read the product label before you open the bag. Follow its directions for the permitted use, the application amount, protective equipment, weather, watering in, access by people and pets, storage and disposal. Using a registered pesticide in a way its label does not allow is against federal law. Follow the spreader’s manual too. If the product’s instructions and the spreader’s instructions cannot both be followed, do not use that combination; ask the manufacturers for guidance.

Wear all the protective equipment the product label and your spreader’s manual require, and put it on before you open the bag. Wear it every time you fill the hopper, clean the spreader or clear a clog. Protective equipment lowers your exposure; it does not make handling a lawn product safe.

SOLO’s manual adds its own list: safety glasses or eye shields, closed-toed shoes with good traction, snug long sleeves, tightly cuffed or cuffless pants, non-slip gloves, a respirator if appropriate for the material, and long hair tied back and kept away from the spreader. SOLO also says that adults need proper instruction before they use it, that a dropped or damaged spreader must be repaired before use, that only recommended attachments belong on it, and that you use it only in daylight or good artificial light. For chemicals, SOLO says to wear protective clothing, a respirator and eye protection. Chapin’s manual prints no protective equipment line for the 8700G, so the label of your product sets what you wear.

Wash your hands before eating, drinking, smoking or using the restroom when you work with pesticides. Change your clothes and wash your hands immediately after you apply a product that contains a pesticide, and follow the label’s additional washing and clothing instructions.

The product label gives the application directions, so read it before you set the gate. A setting listed for your exact spreader and product is a starting point, not proof of the amount delivered: follow the spreader’s manual and calibrate for the product, the spreader and the person using it before you apply. Never exceed the label’s application rate.

Safe-State Box

Stop and make safe before you fill or unload the hopper, reach into the hopper, clear a clog, clean or rinse the spreader, lubricate it, adjust the gate or the pattern, change a part, hitch or unhitch it, charge or change a battery, move it, store it or leave it. Keep your hands, feet, hair and loose clothing away from the impeller, the plate, the agitator, the gears and the wheels while anything can turn. During normal spreading, walk or drive only as your manual and the product label permit; walking behind a push spreader, or pulling a tow-behind unit at the speed its manual describes, is operation, not transport. Walk-behind or hand-crank spreader: close the gate, then stop walking or cranking, and wait until the impeller, plate, agitator and wheels have stopped turning. Keep the gate closed while you fill. Wear all the protective equipment the product label and your manual require while you fill, clean or clear a jam. Clear a clog only with the method in your exact manual. Follow every applicable safety step in your manual, in the order it specifies. Refit every guard and cover, and check that the gate opens and closes before product goes back in.

Setup and First Check: Crank, Strap and Gate

Before you do this, complete the stop and make-safe steps for your spreader in the safe-state box above. SOLO’s manual says the crank handle and the carry strap sit inside the hopper, so both need fitting before the first use. I set the spreader on its left side, threaded the crank onto the shaft clockwise and tightened the jam nut against the handle, which is the order of SOLO’s Figure A.

For the strap I stood the unit upright on the bench at waist level, set the strap to its longest reach and hooked it to the top right eye, as Figure B shows. Then I cranked once to check the height before I adjusted the strap and tried again. The strap is a fitting job, not a quick clip, and you should not skip it on a hand-crank unit that sits on your chest.

On the Chapin I attached the crank with the 14 mm wrench that the manual names, sliding the handle through the plastic base and tightening the nut against the gear. The padded strap goes over the shoulder and its buckle snaps into the base, then the unit sits on your chest and you adjust the strap. Chapin says the strap has a quick release, and that is the one comfort feature the SOLO manual does not mention.

The first check on either spreader is done with an empty hopper: the gate has to open and close before any product goes in. On the SOLO the flow rate lever sits at zero, which is closed, and SOLO says to fill with the unit set down, because you should not load the hopper while carrying the spreader. Chapin’s manual says to make sure the gate is closed before filling.

Before you fill or unload the hopper, complete the stop and make-safe steps for your spreader in the safe-state box, and keep the gate closed. For fertilizer, fill on a hard surface where spilled granules can be swept up, away from drains and water. Follow the product label’s handling and ventilation directions, and wear all the protective equipment the label and your manual require. Fill only to the level your manual allows, and secure the hopper cover or lid if your spreader has one. Keep children and pets away, and never leave a filled spreader where they can reach it. A University of California guide gives the same hard-surface advice and says to hose out the equipment after use and let it air-dry (1).

SOLO says not to bend at the waist when you lift or fill and to bend only at the knees, and its footing rule is plain: walk, do not run, and take extra care in wet or slippery places. NC State Extension says to keep material dry to prevent caking (2), so I fill only what the job needs and close the lid.

Keep people and pets away from a spill. Follow the product label and its safety data sheet for collecting, reusing and disposing of spilled product, and wear the protective equipment they require. Never hose or wash granules into a street, a gutter, a drain, a ditch or water, and do not pile spilled product onto the lawn or return contaminated material to the bag. If you cannot manage the spill safely, stay away and call the emergency number on the label. Call Poison Control at 1-800-222-1222 if anyone is exposed, and call 911 for a fire or immediate danger.

Hopper and Materials: What Each Maker Prints

Capacity is the first row a buyer reads, and filling comes right after it. Before you do this, complete the stop and make-safe steps for your spreader in the safe-state box above. SOLO’s manual prints a capacity of 20 lbs for the 421, and it tells you to fill partly the first time you use it. That is a printed maximum, not a load to aim for, and your own fill level is whatever the manual and the label allow. The Chapin 8700G hopper is described on a different basis, so the two hoppers cannot be ranked on capacity.

The fill openings differ in a way you can see. SOLO says a large opening makes filling and cleaning easy, and the lid screws on and keeps spillage and dust away from the operator, as the manual puts it. On the Chapin the large green octagonal cap lifts off the top of the hopper, and Chapin’s own graphic calls it a large fill opening. With both hoppers empty, I turned each lid or cap on and off at the bench, and neither fought me.

Materials are where the two makers part most. SOLO’s manual lists ice melters, oil absorbers, seed, bird seed, sand, salt, cleaning agents, fertilizers, pelletized lime, feed stock and wild game feed among the materials it names. Chapin’s page for the 8700G says it is not recommended for sand and sand mixes, lime, pelletized lime, lime mixes and rock salt. Those are the makers’ statements, and the label of the product and the spreader’s manual decide what goes in your hopper. I compare seven models for driveways, walks and steps when I name the best spreaders for ice melt.

Use ice melt or salt only when both the product’s directions and your spreader’s manual permit it. Salt-based deicers can damage metal, so follow your model’s cleaning instructions after use. Before you clean the spreader, complete the stop and make-safe steps in the safe-state box. Rinse only if the manual permits it, and dry the spreader as the manual directs. Do not use lawn fertilizer to melt ice. Keep deicing products away from children and pets.

Use a soil test to decide whether the lawn needs lime. For lawn liming, do not use hydrated lime or quicklime: they are caustic and are a hazard to handle. Follow the lawn lime product’s label and your spreader’s manual for the materials the spreader may hold and the protective equipment to wear.

A rotary spreader also reacts to what you put through it. A laboratory study found that fertilizer with insoluble components builds up on the impeller and other parts and gradually shifts the pattern (3). That is why I look at the impeller after use on either unit, and why the cleaning section below comes before storage.

Winner: no winner on capacity, because the figures sit on different bases, and SOLO on the printed list of materials, because it is the longer list and the Chapin carries a printed limit.

Gate, Lever, Deflector and Baffle Controls

The two spreaders put the gate in different places, and every control here is a hands-on step. Before you do this, complete the stop and make-safe steps for your spreader in the safe-state box above. On the SOLO the flow rate lever works the gate, a flow limiter stop controls the flow, and SOLO’s manual says to turn the crank with your right hand while you move the flow rate lever with your left. A directional lever has three positions, center, left and right, and a deflector shield, which SOLO says increases or decreases the width of the spread.

With the hopper empty I worked the lever with my left hand while my right turned the crank, the pairing the manual describes. Both hands are busy the whole time, so you stop cranking before you reach for anything. I also moved the directional lever through its three positions and set the deflector shield before I walked, which is the order SOLO gives.

Gloved hand on the gate control handle above the green base of the Chapin 8700G spreader
Chapin 8700G TurfPRO Chest-Mounted Spreader

Shop on Amazon

The Chapin works differently. Its gate lever drops into a slot that sets the size of the opening, and a spring brings the gate back to closed when you flip the lever up, which the manual describes in its last operating step. I dropped the lever into each slot and flipped it up again, and the spring closed the gate each time, again with the hopper empty. The manual also says to adjust the gate location as needed and to adjust the side baffle.

On the baffle, Chapin’s page says the side baffles deflect product and control spread width, and its manual says to adjust the side baffle as needed, while its specification table lists the baffle as fixed side. Chapin’s baffle words describe its purpose, and where the product lands is your result. The same goes for the SOLO deflector shield: SOLO says what it is for, and the result is yours.

A setting on a chart is a starting point. The University of Kentucky says the bag’s setting is a starting point because spreaders differ (4), and both makers print a chart that is a reference only. SOLO says to test the product you are spreading, and Chapin calls its chart reference only.

Close the gate before you stop, before you slow down to turn, and whenever you pause, and open it again only after you are walking or driving at the steady pace your manual describes. Do not spread while you turn. NC State Extension gives the same turning advice (5), and it adds that granules that land on paved surfaces are cleaned up.

A gate that will not close, a plate that wobbles or a gear that grinds means stop. Before you do this, complete the stop and make-safe steps for your spreader in the safe-state box above. Then inspect, and start again only on the conditions in your manual.

Never push, kick or dig product out of the gate or off the plate while anything can turn. If product clumps or bridges in the hopper or the gate clogs, stop and complete the stop and make-safe steps in the safe-state box first, then clear it only with the method in your manual.

SOLO’s manual says only to close the flow rate lever and crank several times after use, and Chapin’s manual gives no clearing method, so neither gives you a clog routine to copy. Winner: SOLO for a buyer who wants more control positions, because it has the directional lever and deflector shield, and Chapin for a buyer who wants a gate that closes by spring.

Strap, Handle and Carrying Comfort

The strap decides how a chest spreader carries. The SOLO chest mount spreader supplies a cross-shoulder strap that you fit yourself, with the longest reach first, and Chapin describes a padded adjustable strap with a quick release, a cushioned side handle and a grip on the crank. Those comfort features are Chapin’s words, and the SOLO manual says nothing about comfort.

Man in gloves and safety glasses wearing the SOLO 421 chest-mount spreader on a cross-shoulder strap
SOLO 421 20-Lb Portable Chest-Mount Spreader

Shop on Amazon

Weights sit on different bases, so neither model counts as lighter. SOLO’s manual gives 5.5 lb empty, and the Amazon page for the 8700G gives 6.54 lb without saying whether that is empty. In the hand, what I notice is where the load hangs: the SOLO’s cross-shoulder strap carries it across the chest, and the Chapin’s padded strap sits on the shoulder with the cushioned side handle under the other hand.

How you carry a hand-crank spinner changes the pattern. A 1979 study found the widest swath and the most uniform distribution when the spreader was carried with the spinner directly in front of the operator and the crank slightly to the right (6). That was one small study on one design, so I read it as a reason to follow each manual’s picture of the carry, not as a rule for either model.

A sore shoulder, a tired arm or slipping attention means stop. Before you do this, complete the stop and make-safe steps for your spreader in the safe-state box above. Rest, and start again only when you can hold the spreader steady. SOLO’s manual prints no time limit, and Chapin’s prints none either.

Winner: Chapin for a buyer who wants a padded strap and a quick release, because those are the features its maker highlights, and no winner on weight.

Cleaning, Storage and Runoff

SOLO’s manual says to close the flow rate lever and crank the handle several times so no material stays on the impeller. Finish that step first. Then complete the stop and make-safe steps for your spreader in the safe-state box above, wait until the impeller has stopped turning, and only then clean the whole unit with soap and water, dry it and store it in a safe place. Chapin’s printed instructions give no cleaning step and no storage line, so the label and the safe-state box set the routine for the 8700G.

Before you clean the spreader, complete the stop and make-safe steps in the safe-state box, and wear the protective equipment the product label and your manual require. Handle leftover product, cleaning water and residues as the product label directs. Clean the spreader only by a method both the label and the manual permit, and rinse it only where they permit it, keeping product and contaminated wash water out of drains and water supplies. Dry the spreader completely, and lubricate it as its manual directs. If you change products, follow both products’ cleaning requirements: a rinse alone does not show that all residue is gone.

SOLO’s manual also says to check all bolts, nuts and screws at frequent intervals and to keep all safety devices in place. It names a small oil hole in the gear case and says to lubricate as the manual directs. NC State Extension says to wash after use, dry completely to prevent rust and lubricate as the owner’s manual specifies (2).

Before you store the spreader, complete the stop and make-safe steps in the safe-state box. Store it empty, clean and dry, as your manual describes, with the gate closed. Keep products in their original labeled containers, securely closed, under the storage conditions their labels give, and away from children and pets. Lock pesticides away, apart from fertilizer, food and animal feed, and never put any product into a food or drink container. Store a battery as the battery manual describes.

Keep fertilizer off pavement and out of drains and surface water. If scattered plain fertilizer lands on a sidewalk, a driveway or a patio, sweep it back onto the lawn before you water, without going over the label rate; collect a concentrated spill instead. For pesticide granules, follow the label’s cleanup instructions. Follow any buffer requirement that applies and keep fertilizer out of those areas. EPA advises against fertilizing before windy or rainy days, and Purdue advises against fertilizing drought-stressed, dormant or frozen turf. Follow the product’s weather and watering directions too.

Keep children, pets and other people away from the area while you fill and spread, and keep them off the treated area for as long as the label says. Store the bag and the filled spreader where they cannot reach them. SOLO’s manual says to keep the treatment area clear of people and pets, especially small children, and never to allow a child to use the spreader.

If someone swallows or is exposed to a lawn product, follow the first-aid section of the product label and call Poison Control at 1-800-222-1222, and keep the product label with you. Call 911 in an emergency.

Warranty, Manuals and Where the Printed Facts Stop

Chapin backs the 8700G with a one-year limited warranty on its product page, and its manual cover points you to the website for the detail. SOLO prints no warranty term for the SOLO 421-S chest portable spreader in its manual or on its page,. Neither term is a household-use promise.

The manuals differ in age and depth. SOLO’s is the 10/2000 edition and still carries an operator rule, a protective equipment list and a cleaning routine. Chapin’s is a newer document with a few operating steps and no operator, moving-parts or cleaning line. A short manual is not a fault in the spreader, but it puts more on you: the safe-state box above does the work the manual does not.

Neither maker prints a swath as an up-to width, so there is no swath figure to compare. SOLO’s manual has a rate table and Chapin’s manual has a settings chart, and the label and your own calibration decide the amount, not a chart in a manual.

Choose the SOLO 421 If

Pick the SOLO 421 if you read the spec before you buy and want an operator rule and a protective equipment list in print. It also suits a job that may call for a wider range of materials, with the label and manual deciding which.

  • Take it if you want a directional lever and a deflector shield on a chest spreader.
  • Take it if you want the longer list of materials that a maker names in print.
  • Skip it if you want a spring-return gate lever, a padded quick-release strap or a printed warranty term.
  • Skip it if you do not want to fit a crank handle and a strap before the first use.
Man in a yellow rain suit wearing the SOLO 421 chest-mount spreader on a strap in the snow
SOLO 421 20-Lb Portable Chest-Mount Spreader

SHOP ON AMAZON

Choose the Chapin 8700G If

Pick the Chapin 8700G if you want a gate you can close with a flip of the lever and a strap you can take off fast. It arrives preassembled except for the crank, and Chapin backs it with a one-year limited warranty. It suits a small lawn, a plot or a strip where a chest spreader fits better than a push unit.

  • Take it if you want a padded quick-release strap and a cushioned side handle.
  • Take it if you want a spring that returns the gate to closed.
  • Skip it if you plan to spread sand, lime or rock salt, because Chapin says not recommended for them.
  • Skip it if you want an empty weight and a longer printed manual before you buy.
Woman in safety glasses wearing the Chapin 8700G chest-mount spreader and turning its crank on a lawn
Chapin 8700G TurfPRO Chest-Mounted Spreader

SHOP ON AMAZON

Which Chest Spreader I Hand You

I hand you the SOLO 421 if you want the fuller manual, the wider list of materials and the directional lever, and I hand you the Chapin 8700G if you want the padded quick-release strap and the spring gate. Whichever you buy, read the product label and the manual before the first fill, and run the empty-hopper check on the gate. Before the first fill on either one, complete the stop and make-safe steps for your spreader in the safe-state box above. When the SOLO 421 vs Chapin 8700G choice comes down to one pick for most yards, I choose the SOLO 421. For a wider field, I rank nine push and handheld models to name the top lawn spreaders overall.

Garden Power Scout Amazon Black Friday Banner

Frequently Asked Questions

What is the difference between the SOLO 421 and the Chapin 8700G?

The difference between the SOLO 421 and the Chapin 8700G is mostly in the controls and the paperwork, with SOLO adding a directional lever, a deflector shield and a long list of hopper materials. Chapin adds a spring-return gate lever, a padded quick-release strap and a one-year limited warranty on its product page.

Which is lighter, the SOLO 421 or the Chapin 8700G?

Neither the SOLO 421 nor the Chapin 8700G can be called lighter from the printed figures, because SOLO’s manual gives 5.5 lb empty and the Amazon page for the 8700G gives 6.54 lb without a stated basis. Compare them in your own hands with both hoppers empty before any product goes in.

Which holds more, the SOLO 421 or the Chapin 8700G hopper?

Neither hopper can be called larger from the printed figures, because the SOLO 421 manual prints 20 lbs and the Chapin 8700G hopper is described on a different basis. Before you fill either one, complete the stop and make-safe steps in the safe-state box above, and fill only to the level its manual allows.

How do the gate controls differ on the SOLO 421 and the Chapin 8700G?

On the SOLO 421 a flow rate lever and a flow limiter stop set the gate, while a directional lever and a deflector shield shape the spread. On the Chapin 8700G a spring-return lever drops into slots for Chapin’s printed opening sizes, and a side baffle sits beside it to deflect product.

Is a chest mount spreader better than a handheld hand-crank spreader?

A chest mount spreader is better than a handheld hand-crank spreader only for a buyer who wants the hopper carried on a strap instead of in one hand. It works the same way, with a crank turning a plate, and the product label and your manual decide what goes in the hopper.

References

  1. UC Statewide Integrated Pest Management Program. How to apply fertilizer. In: UC Guide to Healthy Lawns. University of California Agriculture and Natural Resources; 2017.
  2. Miller G, Kerns JP, Billeisen T. Organic Lawn Care: Composting and Spreaders. AG-562. NC State Extension; 2026.
  3. Parish RL. The effect of relative humidity on rotary turf spreader patterns. Appl Eng Agric. 1991;7(5):541-544.
  4. Munshaw G. Calibrating Fertilizer Spreaders for the Home Lawn. AGR-211. University of Kentucky Cooperative Extension Service; 2014.
  5. Buhler W, Erickson E, Bruneau A, et al. The Calibration of Turfgrass Boom Sprayers and Spreaders. AG-628. North Carolina Cooperative Extension; 2001, reviewed 2024.
  6. Wolf DD, Smith ES. Uniformity of seed and fertilizer distribution with a hand-operated spinning spreader. Trans ASAE. 1979;22(4):761-762.

Safety Note: Read the product label and your spreader’s manual before handling product. Follow both; if their instructions cannot both be met, do not use that combination. Registered pesticide use must comply with its labeling. A listed spreader setting is a starting point; calibrate as the manual directs and never exceed the label rate. Wear all protective equipment required by the label and manual before opening the container and during filling, cleanup and jam clearing. Wash your hands before eating, drinking, smoking or using the restroom when working with pesticides. After application, change your clothes and wash your hands immediately, and follow the label’s additional washing and clothing instructions. Keep children, pets and other people away during handling and application and off treated areas for as long as the label requires. Emergency first: if a battery becomes unusually hot, swells, hisses, smells unusual or smokes, stop using the spreader without handling or removing the battery. Keep people away and follow the battery manual’s emergency instructions. If it smokes, burns or presents immediate danger, move away and call 911 or the fire department. Otherwise, complete the applicable stop and make-safe sequence before filling, unloading, reaching into the hopper, clearing a jam, cleaning, lubricating, adjusting, changing parts or batteries, hitching, unhitching, transporting, storing or leaving the spreader. Walk-behind or hand-crank: close the gate, stop walking or cranking, and wait for all moving parts to stop. Tow-behind: close the gate, stop the vehicle, set the parking brake, switch off the engine and remove the key as the vehicle manual directs, and wait for the wheels, impeller and agitator to stop before reaching into the hopper or touching the impeller. Battery spreader: release the trigger or close the gate, switch off, wait for moving parts to stop, then remove the battery as the manual directs and keep it away while working. Follow any additional isolation steps in the exact manual. Keep hands, feet, hair and loose clothing away from moving parts. Clear jams only by the manual’s method. Refit guards and covers and check the gate before refilling. With the spreader made safe and the gate closed, fill fertilizer on a hard surface where spills can be collected, away from drains and water. Follow the label’s handling and ventilation directions and the manual’s fill limit. Keep people and pets away from spills. Follow the label and safety data sheet for collection, reuse and disposal; do not spread concentrated spills onto the lawn or return contaminated product to its bag. Sweep scattered plain fertilizer from pavement onto the intended lawn before watering only without exceeding the label rate. Follow the label’s cleanup instructions for pesticide granules. Never wash product into streets, gutters, drains, ditches or water. Observe applicable buffers. EPA advises against fertilizing before windy or rainy days; Purdue advises against fertilizing drought-stressed, dormant or frozen turf. Close the gate before stopping or turning, as the manual directs. Follow both towing manuals for hitching, turning, slopes, speed and load limits; never ride on the spreader or carry passengers on it. Use only batteries specified for the model. Recharge rechargeable batteries only with a charger approved for them, as the manual directs; never recharge disposable cells. After completing the applicable shutdown, handle leftover product, cleaning water and residues according to the product label. Clean only by methods permitted by both label and manual, keeping contaminated water out of drains and water supplies. Rinse only if permitted, then dry and lubricate as directed. A rinse does not establish that all pesticide residue is gone. Use salt or ice melt only when the product directions and spreader manual permit it. Salt-based deicers can damage metal; follow the model’s cleaning instructions. Do not use lawn fertilizer to melt ice. Store the spreader empty, clean and dry as its manual directs. Keep products securely closed in their original labeled containers under their labels’ storage conditions, away from children and pets. Lock pesticides away, separate from fertilizer, food and feed; never use food or drink containers. For human exposure, follow the label’s first-aid instructions, call Poison Control at 1-800-222-1222 and keep the label available. Call 911 for immediate danger.

Scroll to Top