A post hole digger is a tool that makes a narrow, deep, round hole for a post. People use the name for a two-bladed hand digger, for a power auger and for a tractor implement, and those are three very different jobs. On my orchard farm every hole starts with the same questions: how wide, how deep and what lies underneath. Below I sort the types, show what each one is used for, explain how to pick one and put the safety steps first, because what is buried matters before the tool does.
What Is a Post Hole Digger?
A post hole digger is any tool built to open a hole that is much deeper than it is wide, usually for a fence post, a gate post, a mailbox post, a small footing or a young tree. The name is loose. A shop may sell a hand digger with two steel blades under that label, and a rental yard may rent a gas power auger under the same one.
Makers use their own words for the powered tools. Echo, Champion and Southland call theirs augers or earth augers, and Southland titles one a two-man earth auger. Hand diggers are usually described by their blades, which is why you also hear clamshell digger. I treat the name as a job description, not as one machine, and I read the maker’s wording before I judge what a listing really is. My explainer on what an earth auger is lists the parts, types and uses for property owners.
The Short Version
A post hole digger makes a deep, narrow hole. A hand digger does it with your arms, a power auger does it with a motor or engine that turns a screw-shaped bit, and a tractor or loader implement does it with the machine it hangs on. Underground lines, soil and the number of holes decide which one is sensible.
Types of Post Hole Diggers
The types differ in what powers them, who runs them and how much ground they can handle. The table sorts them in the order I try them, from the lightest tool to the heaviest.
| Type | What powers it | Who runs it | Where it fits |
|---|---|---|---|
| Hand clamshell digger | Your arms | One person | A few holes in workable soil |
| Hand auger | Your arms, turning a T-handle | One person | Small holes where a clamshell is awkward |
| Gas earth auger | Gas engine, 2-stroke or 4-stroke | One person or two, as the maker’s manual says | More holes than a hand tool suits |
| Battery earth auger | Battery and motor | One person, as the manual says | Quieter work near the house |
| Corded electric earth auger | Motor on a cord | One person, as the manual says | Holes within reach of an outlet |
| Tractor or skid steer implement | The tractor or loader | The machine’s operator | Many holes, big projects |
Hand Clamshell Diggers and Hand Augers
A manual post hole digger, usually the clamshell kind, has two blades on long handles. You drive them into the soil, spread the handles to grip the soil between the blades and lift it out. A hand auger works differently: a T-handle turns a rod with blades at the bottom, so the soil is screwed up instead of lifted.
Neither needs fuel or a battery, and both struggle in roots, stones or hard clay, because your arms are the only engine. For a handful of stakes or one small post, reach for a hand tool first, and I leave the comparison with powered tools to my guide on manual versus powered diggers.
Gas Earth Augers
A gas earth auger, which listings often sell as a post hole digger auger, is a power head with an engine, a gearbox and handles, plus a bit with spiral flights that screws into the ground. Echo describes its power head as an engine, clutch, fuel system, ignition, recoil starter and gear case. Fuel and oil instructions come from the manual of your machine and no other.
Class matters for the number of people. Echo’s manual for its EA-400/500 power heads, in the 2005 edition, says that drilling holes six inches in diameter or larger may be easier if two people hold the handles on opposite sides. Other makers write their augers for one operator holding both handles. Use only the number of people your exact manual specifies. My article on one-person and two-person earth augers covers what makers print and why it matters.
Battery and Corded Electric Augers
An electric post hole digger swaps the engine for a motor, fed by a battery or by a cable. Ryobi lists planting trees, shrubs and flowers, cultivating soil and digging of light duty fencing and posts as applications of its 40 V auger. That wording tells me how the maker sees the machine: a homeowner tool for light work, not a fence-line contractor tool.
Check three printed things on any electric auger first: the bit diameter, the maximum depth and the bit named with that depth. A maximum depth is the most the maker allows with that bit, not what the machine does in hard clay and not a recommended depth for your post. My roundup of electric post hole diggers sets the corded and battery models side by side.
Tractor and Skid Steer Implements
A tractor post hole digger mounts on a tractor’s three-point hitch and takes its power from the tractor. A skid steer auger attaches to a loader and turns with the loader’s hydraulics. Both are attachments to a bigger machine, so they are run from that machine’s controls and manual, and I give no operating steps for them here.
For a homeowner they matter for one reason: they are what a contractor or a rental yard brings when the job is many holes, large bits or hard ground. My articles on tractor diggers and skid steer augers cover them in detail.
Drill-Driven Auger Bits Are Not the Same Tool
An auger bit sold on its own has no engine or motor, so it is not an earth auger machine. It needs a drill or a power head with its own manual, and the safety steps of both makers apply.
How a Post Hole Digger Works
Every type does the same job in the same order: break the soil, lift it out and leave a straight-sided hole. A clamshell breaks it with the blades and lifts it between them. An auger breaks it with the point and the spiral flights, which carry the loosened soil up the shaft as the bit turns.
On a power auger the engine or motor drives a gearbox, which slows the output and raises the twisting force at the bit. Echo prints a 30.2 to 1 reduction for its power heads; I do not use maker figures like that to rank one brand against another. I explain the gearbox and torque step by step in how an earth auger works.
Ryobi, Echo and Champion tell you to lift the bit out of the hole now and then so the soil clears. Soil that piles up on the flights raises the risk of sticking, and a stuck or bound bit leads straight to the torque problem in the safety section below.
What a Post Hole Digger Is Used For
Post holes are the obvious job, but the same tools open holes for stakes, small footings and planting. What changes from job to job is the depth and width, and those come from named guidance, not from the tool.
Fence and Gate Posts
A fence post hole digger earns its place on fence lines, so the depth question comes first. Penn State Extension, writing about horse fence, gives a typical line post depth of 36 inches. Corner and gate posts carry more load, run about 25 percent larger in diameter and are often set to 48 inches. It adds that posts in sandy or chronically wet soil need to go deeper, and that soil that heaves with frost can loosen posts that are not set deep enough. I compare gas, corded and battery options for fence jobs in my roundup on choosing an auger for fence posts.
That is one extension page about one kind of fence, and the right depth for your fence depends on its design, your soil and your local frost. I take the numbers as a starting point to check against the fence plan or the post maker, never as a rule for every yard.
Deck and Shed Footings
A footing is a different decision from a fence post. Footing depth and diameter are set by local code and by frost depth, and the code differs from place to place. As one example only, the City of Blaine, Minnesota, in its Deck/Porch/Ramp handout, asks for footings that reach at least 42 inches below grade, which is its frost line. That figure belongs to Blaine; another city can ask for much less. I compare seven gas, battery and corded models in my roundup on choosing an auger for deck footings.
A digger only makes the round hole. The size, the depth and any permit belong to your building department. Ryobi lists fencing and posts as light duty work, so ask the building department what a footing needs before you choose a tool for one.
Planting Trees and Shrubs
Planting is where holes go wrong quietly. Extension sources differ. Maryland says the hole should be no deeper than the root ball and at least twice as wide, with sides that slope outwards. Illinois says no deeper than the root ball and two to three times as wide. Colorado State says one to two inches shallower than the root ball, three times as wide and saucer-shaped, with the root ball sitting on undug soil. An auger makes a straight-sided cylinder, so check that the hole meets the width, depth and shape your extension source gives before you use one for a tree. I compare nine gas and battery models in my roundup on choosing an auger for planting trees.
Depth and compaction are the two things that hurt a young tree. In one field trial, deep planting killed half of the Yoshino cherries within two years, while every tree planted at grade lived (1). A review of woody plants found that compacted soil raises soil strength and cuts aeration and water uptake, which slows growth (2). Both findings belong to the species and soils tested, so I read them as reasons to check the depth, not as numbers.
Here is the arithmetic for a root ball 12 inches wide. At twice the width the hole is 24 inches across, and at three times it is 36 inches. That is a wide range, and it is the reason I start from the root ball and the extension page for my region, not from the width of a bit.
Which Type Fits the Job
Pick the post hole digger tool by three things: how many holes you have, what the soil is like and how much of the work your body should do. There is no honest answer without those three. My comparison of an auger with a post hole digger helps you choose between them for fence, deck and planting jobs.
- A few holes in workable soil: a hand digger. It needs no fuel and no battery, and it is the tool I trust least in roots and stones.
- A run of holes with a safe place to work: a power earth auger, such as a gas powered post hole digger or a battery model, sized to the post, run strictly by its own manual and its own number of operators. My roundup of gas earth augers compares five gas models for fence and garden post holes.
- Many holes, big bits or hard clay and rock: a larger rental machine with its own manual, or a professional. A homeowner auger is not built for that.
- Any hole where a buried service is uncertain: no auger, no rental machine and no tractor. Stop digging until the location is settled.
I prefer to hire out a hard job than to push a tool past its limits. If the ground is frozen, rock-hard or full of roots, a bit binds and the machine can twist or kick, so wait for better ground or change the method. I do not try to out-muscle ground the tool was not built for.
Expert Tip
Finish the 811 request and the separate locating of private lines such as irrigation and cables before anyone digs, even by hand. Then walk the spot, look at the surface for stones and roots and note where the marks run. What you see tells you more than any listing does.
Safety Before You Dig
A post hole digger is safe only when the ground is cleared, the people are clear and the machine is shut down properly every time. The risks differ by tool. A hand digger mostly punishes your back. A power auger adds a turning bit, torque reaction, fuel or a battery, and a hole that can reach a buried line.
Call Before You Dig
Buried lines come first because a hole can reach them before anyone sees a sign. Damaging buried utilities is a recognised safety risk and cost in excavation, and in a trial with utility workers, simulation training cut utility strikes over twelve months (3). The lesson for a homeowner is plain: locate first, dig second.
Contact 811 before digging and include every planned hole in the locate request. Wait the required state notice period and confirm responses from every notified utility, including markings or a clear/no-conflict response for the work area. Resolve missing or conflicting responses before digging. Follow state ticket-validity and tolerance-zone rules, preserve markings, and keep augers outside the required clearance area. Near marks, use careful hand digging or another locating method permitted by state rules and the utility; obey any stricter auger-manual prohibition. Arrange separate locating for private services that 811 does not cover (irrigation lines, cables). Do not dig where a service’s location remains uncertain, and do not switch to a larger machine to get around it. No augering depth above a buried service is safe.
According to PHMSA, every state has a one-call center, the call is free and the notice period runs 48 to 72 hours, though the waiting time differs by state and the state’s own rules apply. The drip system I built on the farm is exactly the kind of private line that 811 does not mark, so I treat it as a line I have to locate myself before anyone digs near it.
Torque Reaction and People Around You
In a lab simulation of hand-held tool torque reaction, short pulses loaded the wrist and forearm muscles very hard even though the peaks were low compared with maximum strength (4). That study used a simulated threaded-fastener tool, not an auger, so I read it as a reason for a braced stance and a firm grip, not as a measurement of any auger.
If the bit hits a root, a rock or a buried object, it can bind and the machine can twist or kick. Keep firm, balanced footing and hold the designated handles with both hands. Keep hands and feet away from the bit; never grasp or brace the bit or shaft. Never wrap the power cord around your hand, arm or body. Release the throttle or trigger immediately if the bit binds or control is threatened, then complete the full shutdown in the shutdown box and inspect for damage before restarting. Use reverse only where your manual authorizes it for your model.
Gas Engines, Noise and Clothing
Small gas engines can produce lethal carbon monoxide in poorly ventilated spaces, as a review of fatal cases tied to small engines shows (5). Never start or run a gas auger indoors or in a garage or shed, even with the doors open. Start and run it outdoors: the exhaust contains deadly carbon monoxide, which has no color, taste or smell.
Wear safety glasses with side shields or goggles meeting your manual’s specification, including ANSI Z87.1 where required, and add a face shield where required. Wear hearing protection with gas engines and wherever your manual requires it. Wear long pants and sturdy, closed footwear with secure traction, plus any additional protection your manual specifies. Tie back long hair, remove jewelry and secure drawstrings; do not wear loose clothing or loose gloves. Use the gloves specified for the task and keep hair, clothing, gloves, hands and feet away from moving parts.
Full Shutdown Box
Shutdown before you clear or free the bit, change or attach the bit, free a stuck bit, adjust, check or add oil or fuel, clean, load, move, store or leave the auger. Never reach toward the bit while it turns, and never clear it or free it with the machine running. Corded electric auger: release the switch or trigger, wait until the bit has stopped completely, then unplug the auger from the outlet by the plug, not the cord. Before transport or storage, also let the motor cool. Battery auger: release the switch or trigger, wait until the bit has stopped completely, then remove the battery, and the switch key where your model has one, and keep it away from the auger. Gas auger: release the throttle, trigger or control, turn the engine off, wait until the bit and every moving part have stopped completely, then disconnect the spark plug wire (a spark plug cap on some makes) and secure it away from the plug. Let the engine and muffler cool before you touch the bit or anything near the exhaust. For a drill-driven bit or any attachment system, follow the shutdown and isolation instructions in both the bit or attachment manual and the power-head or drill manual (a gas power head needs its own manual’s full shutdown). Only then free a stuck bit or clear wrapped material, using only the method your manual specifies (gloves do not make grabbing sharp wire or cutting edges safe), and check the bit and guards for damage. Do not handle unidentified wire, cables or pipes. Do not use reverse or run the engine or motor to back the bit out unless your manual expressly authorizes it for this task, with both hands on the designated handles and everyone clear of the bit; complete the full shutdown again before any further hands-on work. Add every step your manual gives, in its order, and refit every guard and shield before you restart.
Choosing and Using the Right Tool
Remember three things: a post hole digger covers several tools, the depth and width come from your fence plan, your code or an extension page, and the call to 811 comes before the first scoop. Before you clean or store the auger, complete the full shutdown for your auger in the shutdown box above. Then wipe the soil off the flights and put any bit away dry. Pick the post hole digger that fits the soil, the number of holes and the hands that will run it, and treat the manual of the tool you hold as the final word. My post hole digger picks put corded, battery and gas models side by side for home fence jobs.
Frequently Asked Questions
What is a post hole digger used for?
A post hole digger is used to open narrow, deep holes for fence posts, gate posts, mailbox posts, small footings, stakes and some tree planting. The tool only makes the hole. The depth and width come from your fence plan, your local code or an extension source for planting.
What is a post hole digger called?
A post hole digger goes by several names depending on the type. Makers call their powered tools augers or earth augers, and the hand tool with two blades is often called a clamshell digger. Check the maker’s own wording on a listing to see which tool you are buying.
What is the best tool for digging post holes?
The best tool for digging post holes is the one that fits the number of holes, the soil and the strength of the person using it. A hand digger suits a few holes in workable soil, a power earth auger suits more holes, and a larger rental machine or a professional suits big or hard jobs. Call 811 before any of them.
How wide to dig fence post holes?
The width of a fence post hole follows the size of the post and the design of the fence, so use the width your fence plan or post maker specifies. Penn State Extension says corner and gate posts run about 25 percent larger in diameter than line posts, so bigger posts need more room. No single width fits every fence.
How to dig post holes without a post hole digger?
You can dig a post hole without a post hole digger by working a shovel or spade in small scoops, or by hiring a contractor or renting a machine when there are many holes. Locate buried lines through 811 first, and do not dig where a service location is uncertain. Hard, frozen or root-filled ground is a reason to change the method.
References
- Wells C, Townsend K, Caldwell J, Ham D, Smiley ET, Sherwood M. Effects of planting depth on landscape tree survival and girdling root formation. Arboric Urban For. 2006;32(6):305-311.
- Kozlowski TT. Soil compaction and growth of woody plants. Scand J For Res. 1999;14(6):596-619.
- Gallagher AG, Hart M, Cleary D, et al. Proficiency based progression simulation training significantly reduces utility strikes: a prospective, randomized and blinded study. PLoS One. 2020;15(5):e0231979.
- Armstrong T, Bir C, Foulke J, Martin B, Finsen L, Sjogaard G. Muscle responses to simulated torque reactions of hand-held power tools. Ergonomics. 1999;42(1):146-159.
- Hyson BE, Friedman BM, Spear B, Bishop-Freeman SC. Lethal carbon monoxide generated from small internal combustion engines. J Anal Toxicol. 2024;48(8):625-629.
Safety Note: Only an adult who has read the manual and understands the controls should use an earth auger or post hole digger, never a child or anyone tired or impaired. Use the number of people your manual specifies, and keep everyone else out of the work area. The rotating bit can catch hair, clothing and gloves, and it can bind on a root, a rock or a buried object: the machine can then twist or kick in your hands. Stand with firm, balanced footing and hold the designated handles with both hands. Keep hands and feet away from the bit; never grasp or brace the bit or shaft. Never wrap the power cord around your hand, arm or body. If utility contact or a gas leak is suspected, stop work immediately. Do not touch, inspect, free or move the auger or exposed service, and do not attempt the normal hands-on shutdown or disconnect electrical connections in the suspected leak area. Leave the area, keep others away and contact the utility from a safe location; call 911 for a suspected gas leak or immediate danger. Otherwise, release the throttle or trigger immediately if the bit binds or control is threatened, then follow the shutdown procedure. On a two-person unit, both operators must understand the controls and agree on start and stop signals before starting; stop whenever either operator calls stop. Use reverse only where your manual expressly authorizes it. Never touch or clear the bit while it turns. Before you clear or free the bit, change or attach the bit, adjust, check or add oil or fuel, clean, load, move, store or leave the auger, complete the shutdown for its power type. Corded electric: release the switch or trigger, wait until the bit has stopped completely, then unplug it from the outlet by the plug, not the cord; before transport or storage, also let the motor cool. Battery: release the switch or trigger, wait until the bit has stopped completely, then remove the battery, and the switch key where the model has one. Gas: release the throttle, trigger or control, turn the engine off, wait until the bit and every moving part have stopped completely, then disconnect the spark plug wire and secure it away from the plug, and let the engine and muffler cool before touching the bit, engine, muffler or anything near the exhaust. For a drill-driven bit or any attachment system, follow the shutdown instructions in both the bit or attachment manual and the power-head or drill manual. If the bit sticks or material wraps around it, stop and complete the full shutdown before touching or inspecting it. Use only the freeing or clearing method specified in the exact manual; gloves do not make grabbing sharp wire or cutting edges safe. Do not handle unidentified wire, cables or pipes. Powered reverse is permitted only when the exact manual expressly authorizes it for that task, with both hands on the designated handles and everyone clear of the bit. Complete the full shutdown again before any subsequent hands-on work. Wear safety glasses with side shields or goggles meeting the manual’s specification, including ANSI Z87.1 where required; add a face shield where required. Wear hearing protection with gas engines and wherever the manual requires it. Wear long pants and sturdy, closed footwear with secure traction, plus any additional footwear protection the manual specifies. Tie back long hair, remove jewelry and secure drawstrings; do not wear loose clothing or loose gloves. Use the gloves specified for the task and keep them, clothing, hair, hands and feet away from moving parts. Contact 811 before digging and include every planned hole in the locate request. Wait the required state notice period and confirm that every notified utility has responded with markings or a clear/no-conflict response for the work area. Resolve missing or conflicting responses before digging. Preserve the marks and follow your state’s ticket-validity and tolerance-zone rules. Keep the auger out of the required clearance area; near marks, use careful hand digging or another locating method permitted by state rules and the utility. Follow any stricter prohibition in the auger’s manual. Marks do not show a safe drilling depth. Arrange to locate private irrigation lines, cables and other services that 811 may not cover. If a line’s location remains uncertain, do not dig there. Do not handle or move unidentified cables, pipes or utility lines. Before you start, remove rocks, sticks, wire and loose hoses, and identify irrigation lines, drip lines and sprinkler heads. Keep children, pets and other people out of the work area and at least the distance your exact manual specifies. Stop if anyone enters that area. If your manual gives no number, keep everyone well clear of the work area as it directs. No single distance is safe for every auger. On a slope or uneven ground, slow down, keep firm footing and follow only your manual’s rule. Do not dig in frozen or rock-hard ground. Before refuelling, complete the full gas shutdown described above. Refuel outdoors on the ground, not in a truck or trailer, with the engine cooled. Keep fuel away from smoking, flames, sparks and other ignition sources. Use an approved fuel container, avoid overfilling, secure the cap and follow the manual’s spill-cleanup and restart-location instructions; do not start with a fuel leak. Use the specified fuel and oil arrangement for that engine. Never start or run a gas auger indoors, in a garage or shed, or in an enclosed or poorly ventilated area, even with doors open. Operate outdoors where exhaust cannot accumulate or enter occupied spaces through doors, windows or air intakes. Exhaust contains deadly carbon monoxide. For a corded auger, inspect the cord and extension cord before use and do not use damaged cords or plugs. Use an outdoor extension cord meeting the exact manual’s gauge, length, plug and grounding requirements, and follow its GFCI instructions. Keep connections dry and the cord clear of the bit, heat, oil and sharp edges. Never carry the auger by its cord or wrap the cord around your body. Do not use it in rain or wet conditions prohibited by the manual. Use only manufacturer-approved batteries and chargers for the exact model. Complete the battery shutdown before removing or changing a battery, and keep the switch off and fingers off the trigger when installing one. Do not use damaged or modified batteries or chargers. Keep loose battery terminals away from metal objects, and follow the battery and charger manuals for moisture exposure, charging temperature, cooling and storage. Load and unload only as your manual describes, and store the auger dry and out of children’s reach. Take breaks and stop when you are tired.

