A man using a Master Manufacturing 15-gallon spot sprayer with an Ironton 12V model visible in the background

Master Manufacturing vs Ironton Spot Sprayer: Which 12V Unit Fits Your ATV?

Garden Power Scout Amazon Black Friday Banner

The Master Manufacturing vs Ironton spot sprayer choice comes down to tank size and paperwork: buy the Master 15 gallon for larger spot jobs from one rack, and buy the Ironton 5 gallon when rack space or weight is tight and the jobs are short. Both are 12V vehicle units that clamp to a vehicle battery, and neither is battery powered. At scale I checked sprayer nozzle output with calibration cylinders before each campaign, and the same habit applies here: read what each maker prints before you strap either tank to a rack.

Affiliate Disclosure: Garden Power Scout is a proud participant in the Amazon Services LLC Associates Program. As an Amazon Associate, we earn from qualifying purchases, at no extra cost to you.

Affiliate Disclosure: Garden Power Scout is a proud participant in the Amazon Services LLC Associates Program.

Master Manufacturing vs Ironton Spot Sprayer: The Short Answer

Pick the Master Mfg 15-Gallon UTV and ATV Spot Sprayer for most buyers: it holds three times the liquid per fill and Master Manufacturing’s manual gives a two-year household warranty on replacement parts. The Ironton 12-V ATV Spot Sprayer, 5 Gallon suits a small spot job where the rack or the weight is the limit, because its manual prints a connect order for the wiring and a dry weight. Tank size and warranty decide it; the table below puts every printed figure side by side.

Printed figures for both 12V spot sprayers
Row Master Manufacturing 15 Gallon Ironton 5 Gallon
Sprayer type 12V UTV and ATV spot sprayer 12V ATV spot sprayer
Power source 12V vehicle supply through an 8 ft harness with alligator clamps, per the maker; no battery or charger in the box 12V vehicle supply through a harness with a remote switch and battery clamps, per the Ironton manual; no battery or charger in the box
Tank capacity, as printed 15 gallons, polyethylene 5 gallons maximum, polyethylene (manual, model 99914)
Pump, as the maker names it Everflo 12V on-demand diaphragm pump Ironton pump, on demand (manual, model 99914)
Flow and pressure, maker’s maximums 1.0 GPM and up to 40 PSI, per the maker 1 GPM, up to 40 PSI (manual, model 99914); 3.0 A maximum draw
Gun and nozzle Spray gun with trigger lock and in-handle filter; twist nozzle from straight stream to wide mist Spray gun with adjustable nozzle from straight stream to hollow cone
Hose 15 ft, per the maker About 11 ft (3.35 m) in the manual’s parts list, 10 ft on the sales page
Weight, with its basis Not listed by the maker 10 lb dry (manual, model 99914)
Household warranty Two years, replacement parts only (manual) 90 days from purchase, parts only (manual)
Not in the box Straps, rack, mounting kit, tools Tank straps, rack

The weights cannot be compared, because Master Manufacturing prints no weight and Ironton prints a dry one. Each maker prints up to 40 PSI as its ceiling, and that is the machine’s limit and never a setting to aim for.

Shutdown Before Any Hands-On Work

Every task in this article that puts a hand near the tank, the lid, the gun, the strainer or the harness starts with this box. It is the baseline order for a 12V vehicle sprayer. Master Manufacturing’s and Ironton’s manuals each add steps of their own, which appear in the sections below, and a manual’s steps take precedence.

Emergency First

If a battery becomes unusually hot, swells, hisses, gives off an unusual odor or smokes, stop using the sprayer without handling or removing the battery, keep people away and follow the battery manual’s emergency instructions; if it smokes, burns or presents immediate danger, move away and call 911 or the fire department without finishing the routine shutdown.

Full Shutdown Box

Shutdown before you open the tank, fill or refill it, change or clean a nozzle, clear a clogged nozzle, clean or rinse the sprayer, adjust or repair anything, move, store or leave the sprayer. Never point the wand at yourself, another person or a pet. During normal spraying, move only as the equipment manuals and the product label permit; walking while spraying with a backpack unit, or driving a mounted boom at the spraying speed its manual describes, is operation, not transport. Never ride while operating a hand-held wand or lance.

12V Vehicle Sprayer Shutdown

12V vehicle sprayer (ATV, UTV, cart or tow-behind): first stop and secure the vehicle as its manual directs. Then release the trigger, close the wand or boom valve and switch the pump off at its switch. Relieve all trapped pressure using only your exact manual’s procedure and a discharge destination consistent with the product label, without opening the tank or loosening any part beforehand unless that procedure expressly requires it, and never toward yourself, another person or an animal. Then disconnect the pump’s 12V supply at the connection your manual specifies. Reconnect it only after the work is complete, every part is secured and the pump switch is off.

Protective Equipment and Leaks

Wear the protective equipment the product label requires while you clean the tank, the strainer or a nozzle. Clear a clogged nozzle only with the method in your exact manual; never clear a nozzle with your mouth and never by blowing into it. Add every step your manual gives, in its order. Refit every part, close the lid and check for leaks with clean water before product goes back in.

The Master Manufacturing 15 Gallon Spot Sprayer in Use

The Master Manufacturing spot sprayer is a white polyethylene tank with a small black pump and a red and black wire pair at one end of the top, a coiled hose and a trigger gun with a chrome wand clipped to the front. The tank is 15 gallons, and according to Master Manufacturing the pump is a 12V on-demand diaphragm pump rated at 1.0 GPM with a ceiling of 40 PSI. The maker’s manual covers its whole 12 volt spot sprayer family. I review that 15-gallon unit in my Master Manufacturing sprayer review.

Before you open the tank, complete the full shutdown for your sprayer in the shutdown box above. The tank lid is 5 inches across on a tether, and the tether keeps the lid with the tank while you fill. The wide lid is the first thing I noticed, because a hose or a funnel reaches the opening without a fight.

Master Mfg 15 gallon 12V spot sprayer with white tank, boom wand and coiled black hose
Master Mfg 15-Gallon UTV and ATV Spot Sprayer

SHOP ON AMAZON

The gun is where the maker puts its attention. Master Manufacturing lists a trigger lock and an in-handle filter on the gun. Before you adjust or change the nozzle, complete the full shutdown for your sprayer in the shutdown box above, including its emergency exception, and put on the chemical-resistant gloves the manual names for twisting the nozzle. The nozzle then twists from a straight stream to a wide pattern mist, and with clean water on the concrete pad I watched the pattern change between settings. The trigger lock sat under a gloved thumb without hunting for it, which matters on a pump that starts when you squeeze.

The unit comes with 15 ft of hose, and the maker prints a reach of 18 ft vertical and 20 ft horizontal. Those are the maker’s figures, not mine. From a rack it is a spot tool: a fence line, a gravel edge or the border of the orchard strips, one wand at a time. Master Manufacturing’s page says its molded inserts take a Master Manufacturing broadcast mounting kit sold separately. My roundup of ATV spot sprayer picks shows five 12V units for that kind of job.

The Ironton 5 Gallon ATV Spot Sprayer in Use

The Ironton ATV spot sprayer is a low white polyethylene tank with a round black fill cap, a small black pump on top, a coiled braided hose and a pistol-grip gun with a chrome wand and an orange adjustable nozzle clipped to the front. The tank is 5 gallons maximum, and the figures here are from Ironton’s manual for model 99914, the 5 gallon unit that matches this one on tank size, flow and dry weight. The same sales page offers an 8 gallon size, which is a different unit and not covered here.

Before you open the tank, complete the full shutdown for your sprayer in the shutdown box above. The tank carries its fill marks on the side, and the manual says to check the drain cap. The molded fill marks saved me guessing the level, and the drain cap with its washer is the first part I checked tight.

Ironton 5 gallon 12V ATV spot sprayer with white tank, pump, spray gun and orange nozzle
Ironton 12-V ATV Spot Sprayer, 5 Gallon

SHOP ON AMAZON

The pump is an on-demand pump. Ironton’s manual says it primes itself, turns off, and starts again when you squeeze the trigger with the remote switch on, then cycles to hold pressure in the hose. The remote switch is the feature I like most: the manual says to attach it where it is easily reached from the driver’s seat, with the hook-and-loop pad in the bag, so the pump is off before the wand comes out.

The suction strainer sits on the suction tube inside the tank. Before you reach into the tank, complete the full shutdown for your sprayer in the shutdown box above, including its emergency exception. Then, wearing rubber gloves as the manual says, pull the strainer off by hand and run it under fresh water. That is an easy strainer to reach, and the manual says to clean it before each use. The gun hose in the manual’s parts list is 3.35 m, about 11 ft, while the sales page gives 10 ft.

Before you lift, load or strap the tank down, complete the full shutdown for your sprayer in the shutdown box above. Ironton’s manual says not to lift the sprayer unless it is empty, that the sprayer does not include tank straps, and to secure the tank to your ATV rack with two straps. The rack is yours too. For short spot jobs that is a small price in effort, and for bigger jobs it is the reason to look at the Master Manufacturing spot sprayer first.

Tank, Pump and Pressure Ceiling

Master Manufacturing prints 1.0 GPM and up to 40 PSI for its pump, and Ironton prints 1 GPM and up to 40 PSI for model 99914. Each is a maker’s maximum for its own unit and not a result from my work. The figure that separates the two is the tank: 15 gallons against 5 gallons, a difference of 10 gallons per fill.

Pressure and Nozzle

A sprayer’s maximum pressure is the limit of the machine, not a setting to aim for. The product label and the nozzle’s maker decide the pressure and the nozzle for a job. Higher pressure makes more fine droplets that drift, and the nozzle you choose changes the droplet size.

Nuyttens and colleagues measured droplet size and velocity for 32 nozzle and pressure combinations on a test rig for agricultural boom nozzles. They found that nozzle type, size and pressure all change the droplet size spectrum (1). That was a boom nozzle rig and not a vehicle spot sprayer, so I take only the direction of the finding.

Master Manufacturing’s manual puts the regulator and the pressure gauge on boom-ready units and completed broadcast sprayers, and Ironton’s optional regulator and agitator fit models 99916 and 99917 only.

Winner: the Master Manufacturing, because its tank holds 10 more gallons per fill. For a bigger tank than that, my comparison of 25 gallon sprayers sets the Master Manufacturing Deluxe against a Chapin.

12V Wiring and Mounting on the Vehicle

Both units need a 12V supply from a vehicle battery, and both manuals say how to connect it in different amounts of detail. Before any wiring work, complete the full shutdown for your sprayer in the shutdown box above, including securing the vehicle.

Before any wiring work on the pump, complete the full shutdown in the shutdown box above, including its emergency exception and securing the vehicle. Wire the pump the way your sprayer’s manual says, and use the fuse the manual lists. To disconnect the supply, follow the shutdown box through securing the vehicle, stopping the pump and relieving the pressure, then disconnect it as your manual directs; reconnect it only after the work is complete, every part is secured and the pump switch is off.

Master Manufacturing’s manual says to connect the red clamp to the battery’s positive post and the black clamp to the negative post, and it warns that clamps on opposite posts make the pump run backwards. It prints no connect order, no fuse size and no wire gauge, and the harness is 8 ft with alligator clamps according to the maker. The manual also prints no mounting steps, so rack and straps are your own work.

12V diaphragm pump with power wire mounted on top of the Master Mfg 15 gallon spot sprayer tank
Master Mfg 15-Gallon UTV and ATV Spot Sprayer

SHOP ON AMAZON

Ironton’s manual for model 99914 prints an order. Disconnect the vehicle battery ground wire, connect the remote switch’s red battery clamp to the positive terminal, connect the black clamp to the negative terminal, then reconnect the ground wire. The manual says to always connect in that sequence to avoid possible shock, to disconnect in the reverse order, never to touch both battery terminals at the same time or with non-insulated tools, and after each use to disconnect the remote switch from the pump power plug. That order is Ironton’s for this model, and it is not a rule I carry to the Master Manufacturing sprayer.

Red and black 12V power cable with battery clamps and inline switch for the Ironton spot sprayer
Ironton 12-V ATV Spot Sprayer, 5 Gallon

SHOP ON AMAZON

The red and black cable with its battery clamps and inline switch is a clear piece of kit to look at. The two clamps are easy to tell apart on the bench, which helps with the manual’s warning about posts. Ironton prints a maximum draw of 3.0 A for model 99914. Neither manual prints a fuse size or a wire gauge.

Winner: the Ironton, because its manual gives a full connect and disconnect order and a remote switch within reach, while Master Manufacturing’s manual gives only the reversed-clamp warning.

First Water Fill and Pre-Use Check

Before the first water test, complete the full shutdown in the shutdown box above, then fill the tank with clean water and close the lid as your manual directs. Connect the 12 volt supply only when you are ready to test. Run the sprayer and watch the wand, hose, fittings and tank seams for leaks without touching pressurized parts. Before you open the tank, correct a leak or add product, complete the full shutdown again.

Master Manufacturing’s manual says to test with fresh water before adding and spraying chemicals and to test for leaks with water one final time after any repair. Ironton’s manual says to fill the tank with water, check for leaks throughout the system, and if one is found, fix it and test again until none is found. On both I watch the drain cap, the hose clamps and the pump head for drips, and a drip means stop, full shutdown, inspect.

Before every use, complete the full shutdown for your sprayer in the shutdown box above, then check the tank, strainer, hose and nozzle, and fix any leak before product goes in. Follow your manual’s first-use steps.

Vehicle Load, Riding Rules and the Hand Wand

A vehicle sprayer is a tank of liquid on a rack, and the vehicle’s owner’s manual sets what the rack carries. Neither sprayer maker prints a load figure or a slope angle, and I do not give one.

Load, Surge and Slopes

Stay within the rack and tow capacity in your vehicle’s owner’s manual. Sloshing liquid shifts weight and changes how the vehicle handles: Montana State University Extension advises a spray tank with internal baffles and the lowest practical center of gravity, a boom that works as low to the ground as possible, and a rear-mounted boom or equipment that lowers the operator’s exposure. On an ATV, follow its manual and your hands-on training for body position and for the slopes it permits with a sprayer load; Montana State’s advice for ATVs on a hill is to lean your body uphill, and body position does not guarantee protection against a rollover. In a UTV, stay properly restrained inside the vehicle and follow its manual’s slope limits. Research on ATV injuries has linked uphill travel to backward rollovers (2).

Riding Rules

Wear the helmet and other protective gear the Consumer Product Safety Commission recommends, get hands-on training from a qualified instructor, and sit only in the positions the manufacturer designed for occupants. The CPSC says never to ride with more passengers than there are seats. In a UTV, fasten the seat belts and keep every part of your body inside the vehicle as its manual directs. The CPSC says riders younger than 16 should drive only age-appropriate youth model ATVs, never adult ATVs, and that off-road vehicles are designed for off-road terrain, not paved surfaces. Most ATVs seat one rider.

Montana State University Extension advises not to ride and spray if you have to hold a wand or lance. Both of these sprayers come with a hand gun and wand, so the vehicle stops and is secured before the wand comes out.

Ironton’s manual for model 99914 adds its own lines: do not exceed 5 MPH, do not ride or transport cargo on the sprayer, and expect the vehicle to be less stable with a filled sprayer attached. It recommends a vehicle with a rollover protection system for non-level terrain. The Master Manufacturing manual prints no speed, load or slope line, and its only vehicle rule is to attach the sprayer securely and, before filling, to make sure power to the sprayer and the vehicle is off and the brakes are set.

Winner: the Ironton on the paperwork, because its manual says more about the vehicle, and neither maker’s lines replace your vehicle’s owner’s manual.

Label, Protective Equipment and Mixing

Before you open a product container, read the label. The label is the law, and each sprayer’s manual answers only for the machine.

The Product Label

The product label is the law. It tells you what protective equipment to wear, how and where you may use the product, what weather it allows, how long to stay out of the treated area, how long to wait before you harvest, how to protect bees and other pollinators, and how to dispose of leftover product and the empty container. Using a registered pesticide in a way its label does not allow is against federal law. Your sprayer’s manual does not replace the label, and the label does not replace the manual: read the label before you open the container, and follow both.

Protective Equipment

Wear the protective clothing and equipment the product label requires, and put it on before you open the container. Wear the eye protection and gloves the label names every time you mix, load, spray, clean the tank or clear a nozzle. Cornell’s pesticide safety program also advises chemical-resistant gloves, goggles and a respirator when you handle moderately toxic products, even when the label does not call for them. Wear every respirator the label requires, of the type the label names, and follow the respirator maker’s instructions for fit, use and care. If you follow Cornell’s advice and wear one the label does not require, or if it is unclear which respirator or filter is right, get qualified guidance on the respirator and filter before you handle the product. Protective equipment lowers your exposure; it does not make spraying safe.

Both manuals add their own lines. Master Manufacturing’s says to wear protective equipment as directed on the chemical label and to use rubber gloves when cleaning the suction strainer and chemical-resistant gloves at the nozzle, and it has no general eye-protection line for filling or spraying. Ironton’s says to wear protective clothing, eye protection and chemical-resistant gloves when filling, using and cleaning the sprayer. Both manuals say an operator must be 16 or older.

A critical review of the research on agricultural pesticide users found that the real-world effectiveness of protective equipment may be over-estimated (3). A systematic review of 121 articles on agricultural pesticide handlers found that goggles and gloves were worn less often than long sleeves and trousers (4).

Amounts and Mixing

The product label, not this page, gives the amount of product, the dilution and the mixing order, so read it before you mix. Do not combine products unless the mixture complies with every product’s label and its compatibility has been established through the manufacturers or a qualified pesticide specialist; nobody’s advice overrides a label prohibition.

Mixing and Loading

Before you load the sprayer, complete the applicable full shutdown in the shutdown box, including its emergency exception, and wear the protective equipment the product label and your manual require for the task. Mix and load outdoors, away from other people (including children), pets and livestock, and where a spill or overflow cannot reach a well, a drain or other water. Read the label before you open the container, stand upwind, and do not eat, drink or smoke while you handle pesticides. Never use your mouth to siphon a pesticide from its container. Keep the fill hose above the level of the liquid in the tank so the product cannot siphon back into your water supply, and never leave the sprayer unattended while you fill it. Use measuring tools kept only for pesticides, never kitchen utensils or food containers. Mix only as much as the job needs so the tank ends empty; do not store leftover mix in the sprayer for later, because it can damage the sprayer’s parts.

Children, Pets and Others

Keep children, pets and other people out of the area while you mix, load and spray, and keep them off the treated area for as long as the label says. Before you spray, remove toys and take away or cover pet food and water dishes.

Pollinators

Many pesticide labels warn that the product can kill bees and other insect pollinators, and some tell you not to apply while bees are foraging or to notify a beekeeper first. The label’s pollinator wording decides when you may spray around flowering plants; keep spray from drifting onto beehives and flowering plants. Cornell notes that spraying in the early morning or evening can lower the chance that bees are in the area, but do not spray during a temperature inversion and do not assume those times are suitable: check the actual conditions and follow the label’s weather and pollinator restrictions.

Each manual lists liquids to keep out of the tank. Master Manufacturing’s says never to use flammable chemicals such as diesel fuel and not to use corrosive chemicals such as bleach, and that it is not certified for drinking water or other consumable liquids. Ironton’s says the sprayer is damaged and the warranty voided by bleach, chlorine, ice control chemicals or any petroleum based product, and that it should not transfer anything meant for human consumption. Both manuals say to read and follow the chemical label.

Dedicated Sprayer

Illinois Extension advises a dedicated sprayer for the home orchard, one that has never been used for weed control products. Penn State and Iowa State warn that even small amounts of herbicide left in tanks, hoses, screens and fittings can harm crops, and that water alone is generally not enough to remove pesticide residue. Treat a sprayer that has held weed killer as a weed-killer sprayer, and keep a separate one for fruit trees, vegetables, ornamentals and liquid fertilizer.

Ironton’s manual says it recommends the sprayer not be used for other purposes once it has been used for spraying pesticides. In an orchard setting that is the reason to keep one sprayer for one job.

Winner: the Ironton, because its manual prints an eye-protection line and a dedicate-it line that Master Manufacturing’s manual does not.

Wind, Cleaning and Storage

Both manuals set a wind limit of 4 MPH, in nearly the same words: never spray when the wind exceeds it. The label can be stricter, and extension sources give different figures.

Wind and Drift

Drift is spray carried off target by the air, and wind speed is the factor extension sources stress most. Their figures differ and none fits every situation, and your product label may be stricter than all of them. K-State Extension suggests spraying when the wind is under 10.1 miles per hour and says there is no maximum wind speed that fits every situation. LSU AgCenter says to avoid applying when the wind is above about 10 miles per hour. NC State says under 5 miles per hour when you calibrate with the product in the tank. Cornell gives no number and says not to take a chance by spraying in the wind. Do not spray during a temperature inversion, when cool air near the ground holds small droplets in the air, and do not assume that calm air, early morning or evening is suitable: check the actual conditions and follow every weather restriction on the product label. High temperature and low humidity make spray evaporate faster. Do not spray just before rain. Droplets smaller than about 150 micrometers drift most easily, and higher pressure makes more of them.

Before you drain, flush or clean anything, complete the applicable full shutdown in the shutdown box above, including its emergency exception. Master Manufacturing’s manual says to flush the sprayer per the chemical manufacturer’s recommendations, not to store it with chemicals in the tank, and to run RV anti-freeze through the system before end-of-season storage, because freezing voids the warranty. Ironton’s says the same about flushing and chemicals in the tank, adds a general procedure that sends the flush water onto an area that can accept dilute pesticide application, which only the exact product label can confirm, and says to store the sprayer indoors, since freezing damages it.

Cleaning

Before you clean the sprayer, complete the applicable full shutdown in the shutdown box, including its emergency exception, and wear the protective equipment the label and your manual require. Clean the sprayer as soon as you can after use, because dried product is harder to remove than product still in solution. Empty the tank, rinse the tank, hose, wand and nozzle, and clean the strainers and screens, following the product label and your manual; extension guidance warns that water alone may not remove every product. Clean it away from desirable plants, wells and other water, and wash the outside. Do not pour leftover product or rinse water down a sink, a toilet or a storm drain, or onto bare ground.

Storage

Before you store the sprayer, complete the applicable full shutdown in the shutdown box, including its emergency exception. Store pesticides in their original containers, with the label on, locked up or under the control of a person who can keep others away, and out of the reach of children. Never put a pesticide in a container used for food, drink or household products. Keep pesticides away from food, animal feed and protective equipment, and store pesticides and fertilizers apart, because they can react with each other and start a fire. Store the sprayer drained, cleaned and dry, as your manual describes.

Container Rinsing and Disposal

Follow the product label’s instructions for rinsing the empty container, handling the rinse water and disposing of the container, and rinse only a container the label directs you to rinse. Add rinse water to a spray mixture only when the label permits it and the mixture can take it without exceeding the permitted fill level or changing the label-directed mixture. Never reuse an empty pesticide container for any purpose. For leftover product, follow the label’s disposal steps, or call your state pesticide agency or a household hazardous waste program.

Exposure

If someone is exposed to a pesticide, follow the first-aid section of the product label and call Poison Control (America’s Poison Centers) at 1-800-222-1222, and keep the product label with you. Call 911 in an emergency.

Spills

If product spills, keep people and animals away and follow the emergency directions on the product label and its safety data sheet. Try to contain a small spill only if the label says that is safe and you have the protective equipment it requires; when it is safe to do so, complete the shutdown before hands-on work on the sprayer. For a spill you can safely manage, use only absorbents and waste containers that are compatible with the spilled product, as its label, its safety data sheet or qualified emergency guidance specifies, and dispose of the collected waste as directed. If the spill is more than you can manage safely, call the emergency number on the label; call Poison Control at 1-800-222-1222 if anyone is exposed, and call 911 for a fire, immediate danger or a large spill.

Winner: a tie, because both manuals send you to the chemical label for the flush and both call for anti-freeze before winter.

Warranty, Kit Contents and What You Still Buy

The clearest gap between the two is the warranty. Master Manufacturing’s manual gives two years from the date of purchase and covers replacement parts only, and Ironton’s manual gives 90 days for consumer use, parts only, with no commercial cover. I set the same maker against Chapin in my comparison of Chapin and Master Manufacturing sprayers.

  • Master Manufacturing box: tank, gun with trigger lock and in-handle filter, 15 ft hose and 12V harness, per the maker; the manual’s list adds lid and drain-cap tethers, a drain cap gasket, a gun clip kit and hose clamps, and some parts ship inside the tank.
  • Master Manufacturing extras you buy: straps, a rack, a mounting kit, plus the tools and sealant tape the manual says are not included.
  • Ironton box: tank, pump, gun, adjustable nozzle, hose and harness with battery clamps and remote switch; the manual’s bag adds two gun clips, a drain cap and washer, a hook-and-loop set, screws, a hose guide and two hose clamps.
  • Ironton extras you buy: two tank straps and the rack.

Winner: the Master Manufacturing, because two years against 90 days is the widest printed gap between them.

Choose the Master Manufacturing If

The Master Manufacturing 15 gallon is the sprayer for a rack that has room and for larger jobs.

  • The job is large: the tank holds 15 gallons per fill against 5, and each refill starts with the full shutdown.
  • You want the longer warranty: two years on replacement parts against Ironton’s 90 days.
  • You can size the rack and straps yourself: the manual prints no mounting steps and no load figure.

What I like in the Master Manufacturing is the larger job it suits. Skip it if your rack limit cannot take a full 15 gallon tank or you want a printed wiring order, because both gaps are real on its paper.

SHOP ON AMAZON

Choose the Ironton If

The Ironton 5 gallon is the sprayer for short spot jobs and a tight rack.

  • The rack or the weight is the limit: the manual prints 10 lb dry and a 5 gallon maximum.
  • You want a printed wiring order: the manual gives the connect and disconnect sequence and a remote switch at the seat.
  • You value the printed vehicle lines: 5 MPH, no riding on the sprayer and a ROPS vehicle on non-level ground.

The Ironton is the unit for small border jobs. Skip it if you want the longer warranty or more than 5 gallons between refills, because it offers neither.

SHOP ON AMAZON

Before You Buy Either Unit

Match the tank to your rack and your jobs. A 15 gallon tank holds 10 more gallons per fill, and a 5 gallon tank is the smaller unit for short spot work. Read the vehicle manual’s rack limits first, then the sprayer manual’s wiring lines, and keep the label in hand when you mix. For most buyers the Master Manufacturing is the better buy, and the Ironton wins where the rack is tight, so decide on rack and job size. That is how the master manufacturing vs ironton spot sprayer question settles once the rack limit and the job are known.

Garden Power Scout Amazon Black Friday Banner

Frequently Asked Questions

Is the Master Manufacturing 15 gallon spot sprayer better than the Ironton 5 gallon?

The Master Manufacturing 15 gallon spot sprayer is better than the Ironton 5 gallon for larger jobs from one rack, because it holds three times the liquid per fill and carries a two-year warranty. The Ironton is the better pick when rack space or weight matters more than fewer refills.

Does the Ironton ATV spot sprayer come with a battery?

The Ironton ATV spot sprayer does not come with a battery or a charger, because it is a 12V vehicle unit that clamps to the vehicle’s battery through a harness with a remote switch. Ironton’s manual for model 99914 also says the sprayer includes no tank straps, so plan to buy two.

Does the Ironton sprayer pump run all the time?

The Ironton sprayer pump does not run all the time, because Ironton’s manual for model 99914 calls it an on demand pump that primes, turns off and restarts when you squeeze the trigger. A pump that cycles while you are not spraying points to a leak, so complete the full shutdown in the shutdown box above first.

Does the Ironton 5 gallon sprayer come with tank straps?

The Ironton 5 gallon sprayer does not come with tank straps, and Ironton’s manual for model 99914 says to secure the tank to your ATV rack with two straps and not to lift the sprayer unless it is empty. Before you lift or strap it down, complete the full shutdown for your sprayer in the shutdown box above.

What warranty does the Master Manufacturing 15 gallon spot sprayer have?

The Master Manufacturing 15 gallon spot sprayer has a two-year warranty from the date of purchase, according to the maker’s manual, and it covers replacement parts only. Ironton’s manual gives 90 days for consumer use, parts only, so the Master Manufacturing carries the longer cover for household use on the printed terms.

References

  1. Nuyttens D, Baetens K, De Schampheleire M, Sonck B. Effect of nozzle type, size and pressure on spray droplet characteristics. Biosyst Eng. 2007;97(3):333-345.
  2. Brandenburg MA, Brown SJ, Archer P, Brandt EN. All-terrain vehicle crash factors and associated injuries in patients presenting to a regional trauma center. J Trauma. 2007;63(5):994-999.
  3. Garrigou A, Laurent C, Berthet A, et al. Critical review of the role of PPE in the prevention of risks related to agricultural pesticide use. Saf Sci. 2020;123:104527.
  4. Sapbamrer R, Thammachai A. Factors affecting use of personal protective equipment and pesticide safety practices: a systematic review. Environ Res. 2020;185:109444.

Safety Note: Read your sprayer’s manual and the product label before you open any container. The label is the law: it tells you what protective equipment to wear, how and where you may use the product, what weather it allows, how long to stay out of the treated area, how long to wait before you harvest, how to protect bees and other pollinators, and how to dispose of leftovers and the empty container. Using a registered pesticide in a way its label does not allow is against federal law. This page never gives an amount of product, a dilution or a mixing order: the label does. Wear the protective clothing and equipment the label requires, put it on before you open the container, and wear the eye protection and gloves it names whenever you mix, load, spray, clean the tank or clear a nozzle. Protective equipment lowers your exposure; it does not make spraying safe. Wear every respirator the label requires, of the type it names, and follow the respirator maker’s fit, use and care instructions. Before you clean or store the sprayer, or wire a 12V pump, complete the shutdown below first. Before you mix or load, complete the shutdown below, including its emergency exception. Mix and load outdoors, away from other people (including children), pets and livestock, and where a spill cannot reach a well, a drain or other water. Stand upwind, never use your mouth to siphon a product, keep the fill hose above the liquid so it cannot siphon back into your water supply, and never leave the sprayer unattended while you fill it. Mix only what the job needs, and do not store leftover mix in the sprayer. Never point the wand at yourself, another person or a pet, and never test a spray against your hand. Emergency first: if a battery becomes unusually hot, swells, hisses, gives off an unusual odor or smokes, stop using the sprayer without handling or removing the battery, keep people away and follow the battery manual’s emergency instructions; if it smokes, burns or presents immediate danger, move away and call 911 or the fire department without finishing the routine shutdown. Otherwise, before you open the tank, fill it, change or clean a nozzle, clear a clogged nozzle, clean or rinse the sprayer, adjust or repair anything, charge or change the battery, load, unload, transport, store or leave the sprayer, or lift, put on or take off a backpack unit, complete the shutdown. During normal spraying, move only as your manual and the product label permit, and never ride while operating a hand-held wand or lance. Battery sprayer: release the trigger or close the wand valve, then switch the pump off. Relieve all trapped pressure using only your exact manual’s procedure and a discharge destination consistent with the product label, without opening the tank or loosening any part beforehand unless that procedure expressly requires it, and never toward yourself, another person or an animal. Then remove the battery. 12V vehicle sprayer: first stop and secure the vehicle as its manual directs, then release the trigger, close the wand or boom valve and switch the pump off. Relieve all trapped pressure using only your exact manual’s procedure and a discharge destination consistent with the product label, without opening the tank or loosening any part beforehand unless that procedure expressly requires it, and never toward yourself, another person or an animal. Then disconnect the pump’s 12V supply at the connection your manual specifies, and reconnect it only after the work is complete, every part is secured and the pump switch is off. Wear the label’s protective equipment while you clean the tank, the strainer or a nozzle. Clear a clogged nozzle only with the method in your exact manual, never with your mouth and never by blowing into it. Refit every part and check for leaks with clean water before product goes back in. For the first water test, complete the shutdown first, fill the tank with clean water and close it as your manual directs, connect the power only when you are ready, and watch the wand, hose, fittings and tank seams for leaks without touching pressurized parts; complete the shutdown again before you open the tank, fix a leak or add product. Wind, heat and fine droplets carry spray off target: the label may be stricter than any extension guideline, and extension sources give different wind figures, so no single number fits every situation. Do not spray during a temperature inversion, and do not assume that calm air, early morning or evening is suitable. Do not spray just before rain. Keep children, pets and other people out of the area while you spray and off the treated area for as long as the label says, and remove toys and cover pet food and water dishes first. The label’s pollinator wording decides when you may spray around flowering plants, and early morning or evening is not automatically suitable. A sprayer that has held weed killer should stay a weed-killer sprayer: extension services advise a dedicated sprayer, and rinsing may not remove every residue. Follow the product label’s instructions for rinsing empty containers, handling rinse water and disposing of them, and never reuse an empty pesticide container; for leftover product, call your state pesticide agency or a household hazardous waste program, and never pour it down a sink, a toilet or a storm drain. Store pesticides in their original containers, locked up and out of the reach of children, away from food and animal feed, and keep pesticides and fertilizers apart. If someone is exposed, follow the first-aid section of the label, call Poison Control at 1-800-222-1222 and keep the label with you; call 911 in an emergency. If product spills, keep people and animals away and follow the label’s emergency directions; try to contain a small spill only if the label says that is safe and you have the protective equipment it requires, and otherwise get help (the emergency number on the label, Poison Control if anyone is exposed, 911 for a fire, immediate danger or a large spill). Use only the battery and charger the maker supplies or lists for your exact sprayer, charge and store the battery as your manual describes, and do not use a damaged battery or charger: lithium-ion batteries can overheat and catch fire. Wire a 12V pump the way your manual says and use the fuse it lists. On an ATV or UTV, wear the helmet and protective gear the Consumer Product Safety Commission recommends, get hands-on training, sit only in the positions the manufacturer designed, never ride with more passengers than there are seats, and in a UTV fasten the seat belts and keep every part of your body inside the vehicle; stay within the rack and tow capacity in your vehicle’s owner’s manual, and remember that sloshing liquid shifts weight and changes how the vehicle handles; Montana State University Extension advises against riding and spraying if you have to hold a wand or lance. Stop at once, complete the full shutdown and inspect if the sprayer leaks, loses pressure or runs without spraying, and restart only as the manual allows. If a battery becomes unusually hot, swells, hisses, gives off an unusual odor or smokes, do not handle or remove it: keep people away, follow the battery manual’s emergency instructions, and if it smokes or burns, move away and call 911 or the fire department. Before you fill the tank, complete the shutdown, and fill it only to the level your manual allows. Carrying a full tank is tiring: rest when you are tired.

Scroll to Top