A broadcast spreader is a hopper over a gate that feeds a spinning plate, and the plate throws granules outward in a fan wider than the machine. I came to spreaders from seed drill work: in large-scale production I verified seed drill calibration on weighing trays, and I still treat any spreader as a gate and a plate that need checking before product goes in. This guide covers the name, the parts, the forms, what changes the throw and the handling rules that come with every bag.
What Is a Broadcast Spreader?
A broadcast spreader holds granular product in a hopper. A gate under the hopper opens when you squeeze a trigger or move a lever, and the product drops onto a turning plate called an impeller. The plate throws it out to the sides and the front. Kentucky Extension says rotary spreaders distribute material through centrifugal force and, because they spread a wider swath, work well for large areas (1). My answer to “how does a broadcast spreader work” follows the product from hopper through gate and spinner.
That one idea explains the strengths and the limits. A wide fan covers a lawn in fewer passes than a spreader that only drops product between its wheels. NC State Extension says rotary spreaders cover a wider area faster than drop spreaders, take less effort to push and clear the ground better (2). The same fan is heavy in the middle and light at the sides, and it reaches past the edge of the grass, which is why the rest of this guide spends time on overlap, edges and handling.
Broadcast Spreader or Rotary Spreader?
Two words are in use for this machine. Extension writers say rotary: Kentucky’s figure caption reads “walk-behind and over-the-shoulder rotary (centrifugal) spreaders”. UC IPM lists broadcast spreaders and drop spreaders as the two mechanical ways to put dry fertilizer on a lawn, and the makers say broadcast. The guide for the Scotts EdgeGuard DLX names a Broadcast Spreader and labels its plate a Rotary Disk, and a listing may join the words into rotary broadcast spreader. What defines the type is the spinning plate, and a drop spreader, which lets product fall straight down through openings, is a different machine. My broadcast spreader vs drop spreader comparison sets out how each delivers product to the lawn.
What a Broadcast Spreader Puts on the Ground
Several makers list both fertilizer and grass seed for one push model. According to Scotts, the EdgeGuard DLX applies fertilizer, grass seed and granular weed killer, and according to EarthWay, the 2600A-Plus takes compatible fertilizer, grass seed, grain and other granular materials. A given product may go through a broadcast seed spreader or any other model only when the product’s label and the exact spreader manual both permit it. Which materials a given model may hold is the maker’s statement in its manual, and the product’s own label decides everything about the product.
Label First
Read the product label before you open the bag. Follow its directions for the permitted use, the application amount, protective equipment, weather, watering in, access by people and pets, storage and disposal. Using a registered pesticide in a way its label does not allow is against federal law. Follow the spreader’s manual too. If the product’s instructions and the spreader’s instructions cannot both be followed, do not use that combination; ask the manufacturers for guidance.
My own habit comes from plant protection training: the product label is the first page I read, before the spreader’s manual and before any setting chart.
The Parts of a Broadcast Spreader
Every broadcast spreader is built from the same short list of parts, and knowing them tells you what to look at before the first fill. The table shows what three push models print for each part, in the makers’ own words. I explain the different types and their parts in my answer to “what is a fertilizer spreader”.
| Part | Scotts EdgeGuard DLX | EarthWay 2600A-Plus | Brinly P20-500BHDF-A |
|---|---|---|---|
| Hopper, maker’s figure | Not listed | 40 lb | 50 lb |
| Gate control | Trigger on the handle | Lever on the handle gauge | Flow control lever on a shut-off plate |
| Agitator | Labelled inside the hopper | Listed in the parts | Removable, for use only if needed |
| Hopper screen | Not listed | Not listed | Listed, for use when filling |
| Wheels, maker’s figure | Not listed | 9 inch pneumatic | 12 inch by 3 inch pneumatic |
| Side control | EdgeGuard lever, right side | Side Spread Control, left side | Deflector shield, left side |
The Safe-State Box
Every hands-on job on a spreader starts with the same steps, so they sit here once, whole. Later sections point back to this box.
Safe-State Box, Part 1
Emergency first, for a spreader with a battery: if a battery becomes unusually hot, swells, hisses, gives off an unusual odor or smokes, stop using the spreader without handling or removing the battery, keep people away and follow the battery manual’s emergency instructions; if it smokes, burns or presents immediate danger, move away and call 911 or the fire department without finishing the routine steps. Stop and make safe before you fill or unload the hopper, reach into the hopper, clear a clog, clean or rinse the spreader, lubricate it, adjust the gate or the pattern, change a part, hitch or unhitch it, charge or change a battery, move it, store it or leave it. Keep your hands, feet, hair and loose clothing away from the impeller, the plate, the agitator, the gears and the wheels while anything can turn. During normal spreading, walk or drive only as your manual and the product label permit; walking behind a push spreader, or pulling a tow-behind unit at the speed its manual describes, is operation, not transport.
- Walk-behind or hand-crank spreader: close the gate, then stop walking or cranking, and wait until the impeller, plate, agitator and wheels have stopped turning.
- Tow-behind spreader: close the gate, stop the vehicle, set the parking brake, switch the engine off and remove the key as the vehicle’s manual says, and wait until the wheels, impeller and agitator have stopped turning, before you reach into the hopper or touch the impeller.
- Battery spreader: release the trigger or close the gate as your manual directs, switch the spreader off, wait until all moving parts have stopped, then remove the battery as the manual directs (on a model with a built-in battery that cannot be removed, such as the WORKPRO X, follow that manual’s own off and storage steps instead, and never open the battery compartment) and keep a removed battery away from the spreader while you work. Follow any additional isolation steps in the exact manual.
Safe-State Box, Part 2
Keep the gate closed while you fill. Wear all the protective equipment the product label and your manual require while you fill, clean or clear a jam. Clear a clog only with the method in your exact manual. Follow every applicable safety step in your manual, in the order it specifies. Refit every guard and cover, and check that the gate opens and closes before product goes back in.
Hopper, Screen and Agitator
The hopper is the bin that holds the product. Before you fill it, complete the stop and make-safe steps for your spreader in the safe-state box above. According to NC State, you should then make sure the lever is closed and the screen filter is in place to prevent clogging (2). Brinly’s manual for the P20-500BHDF-A calls for the hopper screen when filling and describes a removable rotary agitator marked for use only if needed, and the Scotts guide labels an agitator inside the DLX hopper. Once those steps are done, I look at the fill opening and the screen first on any model, because that is where product and your hands meet.
Gate, Lever and Rate Dial
The gate is the opening under the hopper, and it is the part you work at every turn. On the Scotts DLX the guide says to squeeze the trigger to release the product and to release it when making turns. EarthWay’s manual for the 2600A-Plus has you pull the lever back to the stop bolt to spread and push it forward to close the flow holes before you stop moving. Brinly’s flow control lever works a shut-off plate through a rod. I recommend a gate you can close with one hand before every turn. For a closer look at this 40 lb residential push model, read my review of the EarthWay 2600A-Plus.
Each of these has a numbered dial or gauge that sets how far the gate opens. The numbers belong to that maker’s own scale: NC State says different spreaders, even from the same manufacturer, should be calibrated individually (2). The product label gives the application directions, so read it before you set the gate. A setting listed for your exact spreader and product is a starting point, not proof of the amount delivered: follow the spreader’s manual and calibrate for the product, the spreader and the person using it before you apply. Never exceed the label’s application rate.
Impeller, Drive and Wheels
The impeller is the turning plate, a disc or a paddle. NC State lists what changes its calibration: diameter, speed through the gear ratio, concavity, height above the ground, fin shape, angle and surface (2). On a push model a wheel turns gears and the gears turn the impeller. EarthWay describes a gearbox on the axle that drives its impeller, and Brinly’s manual says the fan speed follows the speed at which you operate it. NC State adds that generally only one wheel drives the impeller, which is the reason a turn changes the throw. My answer to “what is a spreader impeller” covers the parts and types.
Wheel type is a maker’s fact. EarthWay prints 9 inch pneumatic wheels for the 2600A-Plus and Brinly prints 12 by 3 inch pneumatic wheels for the P20-500BHDF-A, while Scotts lists no wheel type for the DLX.
Side Control and Deflector
Many models carry a way to block one side of the throw. According to Scotts, the EdgeGuard lever on the DLX blocks off the right side of the pattern to keep product from landing on non-lawn areas. EarthWay’s Side Spread Control shuts off left-side spreading on the 2600A-Plus, and Brinly’s manual says its deflector shield keeps material from moving toward the left side of the hopper. Where product could land on a path, a bed or a drain, check the edge yourself the first time and follow the spill and runoff steps in the handling section below. My answer to “what is a spreader deflector” goes into these side controls.
The Forms a Broadcast Spreader Comes In
The spinning plate shows up in four forms, and each one has a different way of turning that plate and a different way of moving over the ground.
Walk-Behind Push Spreaders
The walk-behind push spreader is the form most people picture, and it is the form of all three models in the table. Kentucky’s figure shows it next to an over-the-shoulder unit (1). NC State says to push it, never pull it (2). I recommend a push model for a lawn like the one around the family home: open, level and bounded by a path, a concrete pad and a gravel yard. I explain the parts and what each does in my answer to “what is a push spreader”.
Handheld Spreaders
A handheld broadcast spreader swaps the wheels for a hand crank, or for a small motor on a battery model. A 1979 study of one hand-operated spinner spreader, called widely used for seeding and fertilizing small fields, lawns and gardens, found that the way you carry it changes the pattern: the widest swath and the most uniform distribution came with the spinner directly in front of the operator and the crank slightly to the right (3). That is one design and one old study, so read the principle and not a rule: carry the spreader as its manual shows. For the vegetable plot beside the house, I recommend a handheld or a drop spreader over a push model.
Battery Spreaders
Use only the batteries the maker specifies for your exact spreader, and charge, store and handle them only as your manual describes. Recharge rechargeable batteries only with a charger the manual approves, and never recharge disposable cells. Before you fill the hopper, clear a jam, clean the spreader or change the battery, follow the emergency exception and the applicable stop and make-safe steps in the safe-state box. Do not use a damaged battery or charger. If a battery becomes unusually hot, swells, hisses, gives off an unusual odor or smokes, stop using it without handling or removing it, keep people away and follow the battery manual’s emergency instructions; if it smokes or burns, move away and call 911 or the fire department.
Tow-Behind Spreaders
A tow behind broadcast spreader is a wheeled hopper pulled by a lawn tractor, a zero-turn mower or an ATV. Its plate is ground-driven, so it turns only while the wheels turn. NC State says to make turns with the spreader closed, start walking before opening the gate and close it before stopping (4). The vehicle’s manual and the spreader’s manual set every limit that matters for the pull. My answer to “what is a tow-behind spreader” covers that form in more detail.
Tow-Behind Units
Follow your towing vehicle’s owner’s manual and the spreader’s own manual for hitching, turning, slopes, speed and load limits, and stay within the tow capacity in the vehicle’s owner’s manual. Never ride on a spreader or carry a passenger on it. Turn only as the two manuals direct, and keep children and pets well clear of the vehicle and the spreader while you load, hitch and spread. Before you fill, hitch, unhitch, reach into the hopper or touch the impeller, complete the tow-behind steps in the safe-state box.
What a Broadcast Spreader Does Well and Where It Falls Short
A broadcast spreader trades edge control for speed over open ground, and the trade is the same on every model. Knowing where it pays and where it costs keeps you from using it on the wrong job.
Where It Fits
Kentucky says this type suits large areas and, being less precise than a drop spreader, is less likely to leave missed strips that show as dark and light stripes (1). That makes a lawn broadcast spreader the natural pick for wide, open grass. I recommend one for open ground like the alleys between my orchard rows, where nothing sits close enough to catch a thrown granule. My large lawn spreader picks cover push and tow-behind models for bigger jobs.
Where It Falls Short
The pattern is not one even width. Clemson Extension describes product landing heaviest directly in front of the spreader and getting lighter as the distance grows, and NC State bases the distance between passes on the effective swath width, not on the width of the machine (4). That is why passes overlap, and why the label and the manual decide how, not a number from a web page.
The fan also reaches past the lawn. UC IPM advises drop spreaders rather than rotary spreaders to avoid off-target fertilizer, and Kentucky says drop spreaders reduce off-target application on beds, sidewalks and driveways. I recommend a drop spreader or a hand tool beside a bed or a walk, and a broadcast spreader for the open middle; my answer to “what is a drop spreader” explains the drop type’s uses and limits.
Spreaders also differ from one another. A field study of commercial farm spreaders found that within-swath uniformity ranged widely from the most uniform to the least uniform, and that spreader type did not appear to decide it (5). Those were farm machines, so take the lesson and not the numbers: a spreader’s pattern should be checked, not assumed.
What Changes How a Broadcast Spreader Throws
The same spreader throws a different pattern on a different day, and five conditions explain most of the change. None of them needs a number from this page, and each sends you back to your label and your manual.
Level Ground and a Level Spreader
A test of tractor-mounted disc spreaders found that the side-to-side angle of the spreader had a significant effect on the pattern, and that rotary spreaders should be level for a proper distribution (6). NC State gives the home version: hold the handle at the height you used in calibration so that the impeller stays level (2).
Humidity and Buildup
Laboratory work on turf rotary spreaders found that when humidity rises above a fertilizer’s critical level, the material turns sticky and the pattern skews, and that materials with insoluble parts build up on the impeller and shift the pattern over time (7). That is a reason to keep product dry, to check the plate for buildup and to be wary of a pattern you checked on a dry day.
Walking Pace
Clemson says that as walking speed increases the rate of application decreases, and the reverse. A laboratory test of one rotary spreader and one material found that the rate changed significantly with a modest speed change, and that the pattern held up better with a faster pace than with a slower one (8). The author warns against stretching that result past one spreader. The practical point is plain: walk at the steady pace your manual describes and keep it the same each time. My guide to the pattern a broadcast spreader throws explains what skews it.
Turns, Stops and Wind
Close the gate before you stop, before you slow down to turn, and whenever you pause, and open it again only after you are walking or driving at the steady pace your manual describes. Do not spread while you turn. NC State explains why: generally only one wheel drives the impeller, so spreading through a turn changes the plate speed and the pattern (2). The same publication says wind speed and direction, slope, temperature and humidity affect distribution, and that it is a good idea to delay application when conditions interfere. Open ground with a prevailing wind, like my yard, makes wind the first thing I read before any job.
For any setting, the bag’s label and the spreader maker’s setting chart decide the starting point, and you calibrate from there.
Handling a Broadcast Spreader Safely
A broadcast fertilizer spreader is a moving machine with a lawn product in it, and some of those products are pesticides, which are legal products with a label that has the force of law. These rules apply to every form above.
Protective Equipment and Filling
Protective Equipment
Wear all the protective equipment the product label and your spreader’s manual require, and put it on before you open the bag. Wear it every time you fill the hopper, clean the spreader or clear a clog. Protective equipment lowers your exposure; it does not make handling a lawn product safe.
The Brinly manual for the P20-500BHDF-A adds its own rules to the label’s: always wear eye protection when operating the equipment, wear substantial footwear and long trousers, never operate it barefoot or in open sandals, and avoid loose clothing that can get caught in moving parts. It also says to always wash your hands after contact with fertilizers and pesticides.
Pesticide-Containing Products
Wash your hands before eating, drinking, smoking or using the restroom when you work with pesticides. Change your clothes and wash your hands immediately after you apply a product that contains a pesticide, and follow the label’s additional washing and clothing instructions.
The first of those two steps is advice from the National Pesticide Information Center, and the second is advice from the EPA. Both are safety recommendations for anyone who handles weed killers and similar products, and the label’s own wording comes first.
Filling
Before you fill or unload the hopper, complete the stop and make-safe steps for your spreader in the safe-state box, and keep the gate closed. For fertilizer, fill on a hard surface where spilled granules can be swept up, away from drains and water. Follow the product label’s handling and ventilation directions, and wear all the protective equipment the label and your manual require. Fill only to the level your manual allows, and secure the hopper cover or lid if your spreader has one. Keep children and pets away, and never leave a filled spreader where they can reach it.
Spills
Keep people and pets away from a spill. Follow the product label and its safety data sheet for collecting, reusing and disposing of spilled product, and wear the protective equipment they require. Never hose or wash granules into a street, a gutter, a drain, a ditch or water, and do not pile spilled product onto the lawn or return contaminated material to the bag. If you cannot manage the spill safely, stay away and call the emergency number on the label. Call Poison Control at 1-800-222-1222 if anyone is exposed, and call 911 for a fire or immediate danger.
Runoff, Weather and Neighbors
Runoff
Keep fertilizer off pavement and out of drains and surface water. If scattered plain fertilizer lands on a sidewalk, a driveway or a patio, sweep it back onto the lawn before you water, without going over the label rate; collect a concentrated spill instead. For pesticide granules, follow the label’s cleanup instructions. Follow any buffer requirement that applies and keep fertilizer out of those areas. EPA advises against fertilizing before windy or rainy days, and Purdue advises against fertilizing drought-stressed, dormant or frozen turf. Follow the product’s weather and watering directions too.
The places to watch are the places granules can leave the grass. On my property that means the path to the house, the concrete work pad and the gravel yard, and the drainage ditches that border the land. I read the label’s buffer and weather lines with those in mind, because a granule on hard ground is a granule that can move with the next rain.
Children, Pets and Others
Keep children, pets and other people away from the area while you fill and spread, and keep them off the treated area for as long as the label says. Store the bag and the filled spreader where they cannot reach them.
Clogs, Cleaning and Storage
Dust and Clogs
Never push, kick or dig product out of the gate or off the plate while anything can turn. If product clumps or bridges in the hopper or the gate clogs, stop and complete the stop and make-safe steps in the safe-state box first, then clear it only with the method in your manual.
Cleaning
Before you clean the spreader, complete the stop and make-safe steps in the safe-state box, and wear the protective equipment the product label and your manual require. Handle leftover product, cleaning water and residues as the product label directs. Clean the spreader only by a method both the label and the manual permit, and rinse it only where they permit it, keeping product and contaminated wash water out of drains and water supplies. Dry the spreader completely, and lubricate it as its manual directs. If you change products, follow both products’ cleaning requirements: a rinse alone does not show that all residue is gone.
NC State says to wash a spreader after each day’s use to avoid buildup around the ports and on the impeller, dry it completely to prevent rusting and keep product dry to prevent caking and clogging (2). The University of New Hampshire and Nebraska Extension both say fertilizer left in a spreader absorbs water and the spreader rusts.
Storage
Before you store the spreader, complete the stop and make-safe steps in the safe-state box. Store it empty, clean and dry, as your manual describes, with the gate closed. Keep products in their original labeled containers, securely closed, under the storage conditions their labels give, and away from children and pets. Lock pesticides away, apart from fertilizer, food and animal feed, and never put any product into a food or drink container. Store a battery as the battery manual describes.
If Someone Is Exposed
If someone swallows or is exposed to a lawn product, follow the first-aid section of the product label and call Poison Control at 1-800-222-1222, and keep the product label with you. Call 911 in an emergency.
Is a Broadcast Spreader the Right Tool for Your Property?
A broadcast spreader is the right tool for wide, open ground where speed matters and the product can stay inside the area the label permits. Three things carry over to any model: the label and the manual decide the product and the machine, the gate closes before every stop and turn, and the pattern is something you check, not assume. Beside a bed, a walk or water, NC State prefers a drop spreader for smaller, contained areas (2). I recommend the lighter job for the hand tool and the open middle for the plate, and either way a broadcast spreader earns its place only when you handle it by the label. My broadcast spreader picks put push, tow-behind and handheld models side by side.
Frequently Asked Questions
What is a broadcast spreader used for?
A broadcast spreader is used to put granular products such as fertilizer and grass seed on open ground in a wide fan. The maker’s manual lists which materials a model may hold, and the product label decides what may go through it.
What is a rotary spreader?
A rotary spreader is a spreader whose hopper feeds a turning plate that throws product outward by centrifugal force, the type that makers and UC IPM call by another name. Kentucky Extension says it spreads a wider swath than a drop spreader and suits large areas.
What is a broadcast spreader for lawn?
A broadcast spreader for a lawn is a push or handheld spinning-plate spreader that throws fertilizer or grass seed across the grass in a fan wider than the machine. Extension sources say the pattern is heaviest in front of the spreader and lighter toward the sides, so passes overlap as the label and the manual direct.
What are the parts of a broadcast spreader?
The parts of a broadcast spreader are the hopper, the gate with its lever or trigger, the rate dial and the impeller, plus a drive that is wheels and gears on a push or tow-behind unit, a crank on a hand-crank unit and a motor on a battery unit. Some models add an agitator, a hopper screen or a side control, and each maker names and places them differently, so use your own manual’s parts list.
How do you use a rotary spreader?
You use a rotary spreader by reading the product label and the spreader’s manual first, completing the stop and make-safe steps in the safe-state box above before you fill, and starting to walk before you open the gate. Close the gate before you slow down, turn or stop, because NC State says generally only one wheel drives the impeller and spreading through a turn changes the pattern. Keep the spreader level, and push it, never pull it.
References
- Munshaw G. Calibrating Fertilizer Spreaders for the Home Lawn. AGR-211. University of Kentucky Cooperative Extension Service; 2014.
- Miller G, Kerns JP, Billeisen T. Organic Lawn Care: Composting and Spreaders. AG-562. NC State Extension; 2026.
- Wolf DD, Smith ES. Uniformity of seed and fertilizer distribution with a hand-operated spinning spreader. Trans ASAE. 1979;22(4):761-762.
- Buhler W, Erickson E, Bruneau A, et al. The Calibration of Turfgrass Boom Sprayers and Spreaders. AG-628. North Carolina Cooperative Extension; 2001, reviewed 2024.
- Crozier CR, Roberson GT. Granular fertilizer spreader swath uniformity achieved at varying target application rates. Crop Manag. 2014;13(1):1-6.
- Yildirim Y. Effect of side to side spreader angle on pattern uniformity in single- and twin-disc rotary fertilizer spreaders. Appl Eng Agric. 2008;24(2):173-179.
- Parish RL. The effect of relative humidity on rotary turf spreader patterns. Appl Eng Agric. 1991;7(5):541-544.
- Parish RL. The effect of speed on performance of a rotary spreader for turf. Appl Eng Agric. 1987;3(1):17-19.
Safety Note: Read the product label and your spreader’s manual before handling product. Follow both; if their instructions cannot both be met, do not use that combination. Registered pesticide use must comply with its labeling. A listed spreader setting is a starting point; calibrate as the manual directs and never exceed the label rate. Wear all protective equipment required by the label and manual before opening the container and during filling, cleanup and jam clearing. Wash your hands before eating, drinking, smoking or using the restroom when working with pesticides. After application, change your clothes and wash your hands immediately, and follow the label’s additional washing and clothing instructions. Keep children, pets and other people away during handling and application and off treated areas for as long as the label requires. Emergency first: if a battery becomes unusually hot, swells, hisses, smells unusual or smokes, stop using the spreader without handling or removing the battery. Keep people away and follow the battery manual’s emergency instructions. If it smokes, burns or presents immediate danger, move away and call 911 or the fire department. Otherwise, complete the applicable stop and make-safe sequence before filling, unloading, reaching into the hopper, clearing a jam, cleaning, lubricating, adjusting, changing parts or batteries, hitching, unhitching, transporting, storing or leaving the spreader. Walk-behind or hand-crank: close the gate, stop walking or cranking, and wait for all moving parts to stop. Tow-behind: close the gate, stop the vehicle, set the parking brake, switch off the engine and remove the key as the vehicle manual directs, and wait for the wheels, impeller and agitator to stop before reaching into the hopper or touching the impeller. Battery spreader: release the trigger or close the gate, switch off, wait for moving parts to stop, then remove the battery as the manual directs and keep it away while working. Follow any additional isolation steps in the exact manual. Keep hands, feet, hair and loose clothing away from moving parts. Clear jams only by the manual’s method. Refit guards and covers and check the gate before refilling. With the spreader made safe and the gate closed, fill fertilizer on a hard surface where spills can be collected, away from drains and water. Follow the label’s handling and ventilation directions and the manual’s fill limit. Keep people and pets away from spills. Follow the label and safety data sheet for collection, reuse and disposal; do not spread concentrated spills onto the lawn or return contaminated product to its bag. Sweep scattered plain fertilizer from pavement onto the intended lawn before watering only without exceeding the label rate. Follow the label’s cleanup instructions for pesticide granules. Never wash product into streets, gutters, drains, ditches or water. Observe applicable buffers. EPA advises against fertilizing before windy or rainy days; Purdue advises against fertilizing drought-stressed, dormant or frozen turf. Close the gate before stopping or turning, as the manual directs. Follow both towing manuals for hitching, turning, slopes, speed and load limits; never ride on the spreader or carry passengers on it. Use only batteries specified for the model. Recharge rechargeable batteries only with a charger approved for them, as the manual directs; never recharge disposable cells. After completing the applicable shutdown, handle leftover product, cleaning water and residues according to the product label. Clean only by methods permitted by both label and manual, keeping contaminated water out of drains and water supplies. Rinse only if permitted, then dry and lubricate as directed. A rinse does not establish that all pesticide residue is gone. Use salt or ice melt only when the product directions and spreader manual permit it. Salt-based deicers can damage metal; follow the model’s cleaning instructions. Do not use lawn fertilizer to melt ice. Store the spreader empty, clean and dry as its manual directs. Keep products securely closed in their original labeled containers under their labels’ storage conditions, away from children and pets. Lock pesticides away, separate from fertilizer, food and feed; never use food or drink containers. For human exposure, follow the label’s first-aid instructions, call Poison Control at 1-800-222-1222 and keep the label available. Call 911 for immediate danger.

