A man pushing a circular surface cleaner attachment across a wide concrete driveway

What Is a Pressure Washer Surface Cleaner? Parts, Ratings, Fit

A pressure washer surface cleaner is a round, shrouded attachment that holds a spinning spray bar and goes on the end of your wand. I built the drip irrigation on our farm with a 150-mesh disc filter at the pump head, so I read what any water accessory asks of the supply before I buy it. Below I cover its parts, how it connects, how to read its printed ratings and the warnings in the maker’s manual.

What Is a Pressure Washer Surface Cleaner?

This attachment connects to the spray wand of a pressure washer. Under its round shroud, a bar with a jet at each end spins as water leaves the jets. According to Simpson, its 15-inch cleaner has “two high-pressure, rotating jets” under a steel shroud, and its manual says to use it “only on flat horizontal surfaces.” That is the whole idea: a wand nozzle makes one narrow spot of spray, and this attachment moves a pair of jets under a cover. I follow the water from hose to nozzle in how a pressure washer works.

The EPA describes the same design in a technical brief on pressure washing hard urban surfaces: a surface cleaner attachment surrounds a rotating spray bar with a shroud, and the brief covers decontamination work, not home cleaning. The attachment is a simple mechanical add-on, and it adds no power to the washer. The washer still makes the pressure and the flow, and the manual of the washer and the manual of the cleaner both set the limits.

The Short Answer

A surface cleaner is a wand attachment: a shroud over a rotating spray bar with a nozzle at each end. It connects to the wand, it suits flat horizontal surfaces as the maker’s manual says, and its printed pressure and flow window must fit your washer. Read both manuals before you connect it.

The term has a second meaning. In cleaning-supply writing, a surface cleaner is also a chemical, such as an all-purpose cleaner or a degreaser, and a section below separates the two.

What Is Inside a Surface Cleaner

A rotary surface cleaner has a shroud, a spray bar with nozzles, an inlet plug and a swivel, and makers print the names and the materials in their own way. The table lists the parts of one model exactly as its maker prints them.

Simpson 15-inch surface cleaner, as Simpson prints it
Part or figure What Simpson prints
Deck width 15 in (381 mm)
Shroud Powder coated steel
Nozzles Stainless steel; two nozzles pre-assembled
Connection 1/4 in (6.35 mm) quick connect plug
Weight 4.5 lb (2.04 kg)
Maximum water temperature 140 F (60 C), cold water use only
Warranty 90 day limited accessory warranty

The Shroud

The shroud is the round cover over the spray bar, and Simpson makes its shroud from powder coated steel. A shroud does not make the stream safe to touch, and the manual’s injection warning still applies to the wand, the nozzles and the water that leaves the unit.

The Spray Bar and Nozzles

The spray bar sits under the shroud. Simpson’s manual says the cleaner ships with two nozzles pre-assembled, and it names a nozzle cleaning tool for clearing them. The bar is the part the manual tells you never to point at your face.

I read the nozzle detail as a wear point, the same way I read a sprayer nozzle. A worn or blocked nozzle changes what a spray does, and the manual says that a pulsing feel at the trigger can mean a clogged or dirty nozzle.

The Inlet Plug and Swivel

The inlet plug is the male end that goes into the quick connect coupler on the spray wand. Simpson’s manual says that water leaking from the swivel connection is normal and acts as a lubricant, which is a good example of a line that only the manual of the exact unit can give you.

How a Surface Cleaner Connects to a Pressure Washer

The connection happens at the wand, and it is a hands-on job. Before you connect or disconnect any accessory, complete the stop and make-safe steps in the box below, in the order your manual gives them.

Safe-State Steps Before Any Hands-On Work

Emergency first, for a washer with a battery: if you notice an unusual odor, a change in color, too much heat, a change in shape, leaking or odd noises from a lithium-ion battery, stop using the washer and follow your battery manual’s emergency instructions. Stop and make safe before you connect or disconnect a hose, change a nozzle, wand or accessory, clear a clogged nozzle, clean a filter, add detergent, refuel, check the oil, charge or change a battery, drain the washer, move it, store it or leave it. Release the trigger and engage the trigger lock on the spray gun. Gas washer: turn the engine off with its switch as the manual says and wait until all moving parts have stopped. Let the engine and the muffler cool for the time your manual gives before you refuel, store the washer or touch hot parts, and disconnect the spark plug wire before maintenance where your manual directs it. Corded electric washer: turn the washer off with its power switch and wait until all moving parts have stopped. Battery washer: turn the washer off and wait until all moving parts have stopped. Every washer, after the steps above for your type: follow your manual’s water-supply shutdown and pressure-relief procedure. Point the gun away from people, pets and electrical equipment at a discharge location your manual and the detergent label permit. Disengage the trigger lock, squeeze the trigger to relieve the trapped pressure as the manual directs, then engage the lock again. Then unplug a corded washer by the plug, not by the cord, with dry hands, or remove the battery from a battery washer as your manual directs and keep it away from the washer while you work. Do not disconnect hoses or change nozzles before the pressure is relieved. If the manual’s procedure does not release the pressure, stop and get service; do not loosen a fitting to release it. Only then disconnect hoses or change nozzles. Where your manual gives a different order for these steps, follow your manual’s order. Follow every applicable step in your manual, in the order it specifies, and check that every hose, fitting and nozzle is attached and undamaged before water or power goes back on.

With those steps done, inspect the high-pressure hose, the spray gun and every fitting before each use, as your manual describes, and do not use a damaged part. Replace a damaged high-pressure hose; never repair or patch it. According to Simpson’s manual, you then insert the cleaner’s inlet plug into the quick connect coupler on the spray wand and secure it.

Connect the hoses and turn on the water before you start the machine, and purge and start it in the order your manual specifies. Read the washer’s manual before you connect water or power, and follow it. Its warnings, its operator rules and its steps for your exact model come before anything on this page.

Use only the nozzles and accessories your manual permits, following its instructions for the job. Never direct any nozzle at skin, people or animals. Before you change a nozzle, complete the stop and make-safe steps in the safe-state box above. Simpson’s manual adds a notice that the use of any other accessory not recommended for use with the tool could be hazardous, and that you should use only accessories rated equal to or greater than the rating of the pressure washer. I read both statements together as one rule: the cleaner and the washer have to agree on paper before they meet in the yard.

Does It Fit Your Washer?

Fit is the first question I ask, and the makers answer it in different words. Simpson’s manual says its cleaner fits most pressure washers and tells you to ensure compatibility and proper fit before you use it, and its product page says the cleaner works with most gas-powered pressure washers inside its printed pressure and flow range. Simpson prints cold water use only, with a limit of 140 F. A cleaner whose maker names only gas washers leaves the electric question to the maker.

Washer manuals are the other half of the answer. Some washer manuals say to use only recommended accessories and name no surface cleaner, and I never assume a cleaner fits such a washer. Where the washer’s manual names no surface cleaner, the fit is a question for the washer’s maker.

If Your Washer Is Gas or Corded

Gas and corded electric owners ask about fit most, so two points apply. Operate a gas pressure washer outdoors, never inside a building or a partly enclosed space. CDC says to keep it at least 20 feet from any window, door or vent, and your manual may set a stricter placement, which you follow. Engine exhaust contains carbon monoxide, which you cannot see or smell and which can kill. Opening a door or a window does not make it safe to run an engine inside. If anyone develops symptoms such as headache, dizziness, weakness, nausea or confusion, move to fresh air and get emergency medical care (1).

Use the electrical supply and the GFCI protection your manual specifies, and test the GFCI before use according to its instructions. If the washer trips a GFCI or a circuit breaker while you use it, stop using it and have a qualified repair person examine it before you use it again; do not keep resetting it and carry on. Where the washer has a grounding prong, connect it to a properly grounded receptacle and never remove the prong. Never cut or splice a power cord or an extension cord.

Wear closed, rubber-soled footwear that gives some electrical insulation, plus any additional footwear the manual requires; footwear does not replace GFCI protection or the other electrical precautions. Use an extension cord only if your manual permits it, and then only the type and length it names. Keep every plug and cord connection dry, out of standing water and away from runoff and the area you are washing, and keep the spray away from outlets, wiring and electrical equipment. Do not use a damaged cord or plug.

Reading the Rating Window on a Surface Cleaner

Simpson prints a window of pressure and flow that its cleaner is made for. The window is a statement by the maker about the washers the cleaner may be paired with, and it is separate from the washer’s own ratings. I explain what a washer’s pressure and flow figures mean in my guide to PSI versus GPM ratings.

Simpson 15-inch cleaner, model 80299, from Simpson’s manual
Figure What the manual prints
Minimum pressure 1500 psi
Maximum pressure 3700 psi
Minimum water flow 1.8 gpm
Maximum water flow 3.0 gpm
Maximum water temperature 140 F (60 C)

The manual adds two danger lines. Do not operate the cleaner with any pressure washer producing greater than 3700 PSI, and do not operate it with any pressure washer producing greater than 3.0 GPM, because either could result in property damage, severe injury or death. A cleaner’s window has a floor and a ceiling, and the ceiling is a warning from the maker, not a suggestion.

Makers do not all print a complete window. Some print a pressure limit and no flow limit, and where a cleaner’s page leaves out a limit that matters for pairing, the maker has to confirm it before you connect the two. I read each figure only inside the maker’s own words, and I never rank one cleaner’s window against another’s, because each maker sets its own basis.

The Simpson manual also says the two nozzles it ships with suit pressure washers running between the minimum and the maximum in the table. If your washer is outside that window on either side, the manual is the end of the discussion, and no accessory, setting or workaround changes it. My guide to the PSI a washer needs shows how to read the printed rating.

Surface Cleaner the Attachment and Surface Cleaner the Chemical

Two different products share this name. One is the attachment described above. The other is a cleaning chemical that some retailers also call a surface cleaner, and the pressure washer only rinses it away afterward.

The two never replace each other. A chemical goes into the detergent system or onto the surface as its label and your washer’s manual say, and the attachment goes on the wand.

Before you add detergent or connect or adjust a detergent accessory, complete the applicable stop and make-safe steps in the safe-state box. Use only the detergents your manual allows, through the detergent system the manual describes, and read the detergent label before you open it. Wear the protective equipment the detergent label requires, and avoid contact of detergent with your eyes and skin. Do not run a detergent that your manual does not name through the pump.

I keep one rule from my plant protection training for this: I read the label of the product in my hand, and I never assume that what suits one machine suits another. That habit applies to a chemical as much as to an attachment.

What Makers Say a Surface Cleaner Is For

Makers describe this attachment as a tool for large flat areas. According to Simpson, its cleaner is used for cleaning driveways, patios, decks, sidewalks and more, and the 15-inch diameter makes cleaning large surfaces possible. Simpson also says the unit gives 10X more coverage than a standard nozzle. That is Simpson’s coverage claim, and it is not a measured cleaning result. My answer to “what surfaces can you pressure wash” lists them manual by manual.

Check both your washer’s manual and the care instructions of the surface or finish maker before you wash, and follow their restrictions. If they prohibit pressure washing, do not use a different nozzle or setting as a workaround.

The Manual’s Own Limits

Simpson’s manual gives the limits of use in plain lines. These are the manual’s statements, and I list them as the maker prints them.

  • Flat horizontal surfaces only: the manual says to use the cleaner only on flat horizontal surfaces.
  • Never lift it while the washer runs: the manual warns against lifting the cleaner from the cleaning surface while the pressure washer operates, and says this could result in property damage, severe injury or death.
  • A raised obstacle damages the unit: striking one means stopping and discontinuing use immediately, and the manual says that continuing could cause property damage, severe injury or death.
  • Walk behind the cleaner slowly: the manual says to walk slowly behind the cleaning deck, and to slow your pace if striping or swirling occurs.

A flat concrete pad like the one in front of my machinery shed matches the kind of surface the manual describes. My crushed stone yard is a different case, and I do not assume that a line about flat horizontal surfaces covers it. I recommend that you read that line the same way for your own yard. If a concrete drive is your job, my roundup of washers for driveways compares gas and electric models.

Safety When You Use a Surface Cleaner

The attachment is a pressure washer accessory, and every hazard of the washer stays. The shroud covers the jets but the stream under it is the same stream that can cut skin and inject water under it. Simpson’s manual opens with a danger line about the risk of fluid injection and tells you not to point the unit at people, pets, electrical devices or the unit itself.

Spray Safety Block

Read the pressure washer’s manual before you connect water or power, and follow it. Its warnings, its operator rules and its steps for your exact model come before anything on this page. Never point the spray at yourself, another person, a pet or any part of the body. Keep your hands and feet away from the nozzle and the stream. Wear safety glasses or goggles and closed footwear when you operate the washer, and put them on before you start; where your manual requires goggles, side shields or a face shield, that requirement replaces the minimum here. Follow the manual’s additional protective-equipment requirements, including hearing protection where the manual requires it. Engage the trigger lock on the spray gun whenever you stop spraying, even for a moment, before you set the gun down, and before you walk away or change position. Hold and brace the spray gun as your manual instructs, keep firm footing on a surface that is not slippery, and follow your manual’s warning about the push of the gun when you squeeze the trigger. Do not use a pressure washer for a task at height, such as from a ladder, unless your manual expressly permits the equipment and the method.

Simpson’s manual names the eye protection it wants: eye protection with side shields marked to comply with ANSI Z87.1. That is the maker’s requirement for its cleaner, and I put it with the other protective equipment your manual lists.

What the Injury Papers Show

The strong spray can cause serious wounds that might first appear minor, and delayed treatment raises the risk of infection, disability or amputation, according to CDC (1). A study of US emergency department data estimated that pressure washers caused most of the hand injection injuries it counted over ten years (2). A case report from Japan describes how such an injury can lead to infection, compartment syndrome and, in some cases, amputation (3). A literature review of mostly industrial injection injuries, from grease and paint guns and solvents, found that the risk of amputation depended on where the injury was and on what was injected (4). It does not describe water injuries, and I cite it only as a reason to treat any injection injury as serious.

Eyes need the same respect. A case series of three patients who used pressure washers describes both blunt and sharp eye injuries, all treated surgically, with poor final vision in all three (5). Protective equipment does not make contact with the stream safe.

Pro Tip

If someone is hit by the stream, get medical care without delay, even if the wound looks small, and tell the clinician that a pressure washer caused the injury. Call 911 for a fire or immediate danger.

Wash Water and People Nearby

Before you wash, plan how to keep wash water, detergent and debris out of streets, storm drains, ditches and streams, because a storm drain carries what enters it to local waters without treatment. Check with your city or county stormwater office about collecting and disposing of the wash water for the job. Send wash water to landscaping only where local rules and the detergent label permit it and the soil can absorb it without runoff or contamination. Otherwise contain and collect it for an approved disposal route.

Keep children, pets and other people away from the work area while the machine runs, and never let a child use the machine. Store the washer and its battery or fuel where children cannot reach them.

Care, Clogs and Replacement Parts

Care is lighter than for a washer, and the manual keeps it short. Before you clean the machine, check or clean a nozzle, or do any other maintenance, complete the stop and make-safe steps in the safe-state box above. Do the maintenance your manual describes, in the order it describes it, and do not use a part or an accessory the maker does not name.

A Clogged Nozzle

A nozzle that gives a weak, uneven or pulsing stream may be blocked. Simpson’s manual says that a pulsating feel when you squeeze the trigger, or more vibration in the unit, can mean a clogged or dirty nozzle, and my guide to a pulsing pressure washer lists what else the manuals say to check. Complete the stop and make-safe steps in the safe-state box, then clear the nozzle only with the tool and the method your manual describes. Never look into the nozzle or point it at anyone to check it.

Before you touch the nozzle, complete the stop and make-safe steps in the safe-state box above. Simpson’s manual then gives its own order for this unit: turn off the pressure washer and shut off the water supply, and with the surface cleaner on the ground, pull the trigger to release water pressure. Disconnect the cleaner from the spray wand, free the nozzle with the nozzle cleaning tool provided, and flush debris out by back flushing with a garden hose. The manual also says to never point the spray bar at your face. Follow your own manual where it gives a different order.

Parts, Warranty and Modifications

Simpson says the powder coated steel shroud and stainless steel nozzles protect against corrosion, and its manual tells you to use only identical replacement parts when servicing the tool. Its product page lists a 90 day limited accessory warranty, so I read the warranty term in the manual of the edition I receive. The manual also says never to modify or alter the product, because changes invalidate the warranty and may cause serious injury or death.

I treat every printed term as a limit on what the maker will stand behind. A maker that prints a short accessory warranty tells me to check the unit before each job, and I recommend you do the same.

Questions to Ask Before You Buy One

This is a small purchase with a long list of fit conditions, and I go through them in the same order every time. The list names no setting and no product, because the answers come from the two manuals and the maker’s page.

  • The printed window. Find the minimum and maximum pressure and flow, with the maker’s own words beside them.
  • Your washer’s manual on accessories. If it names none, or names only its own, the answer is the washer maker’s.
  • The connection. The cleaner and the wand coupler have to match as both makers describe them. Simpson prints a 1/4 inch quick connect plug.
  • Cold water. Simpson prints cold water use only and a limit of 140 F.
  • The surfaces the maker describes. Read the manual’s flat horizontal surface line first.
  • The warranty term. Read the term in the manual of the edition you receive, and note that Simpson prints 90 days for its accessory.
  • Obstacles and lifting. If your yard has raised edges, read that line twice.

A cleaner that passes this list is a match on paper. The manuals still decide how to use it on your job.

Match the Cleaner to the Washer Before Anything Else

Remember three things: the attachment is a rotating spray bar under a shroud, its printed window must fit the washer’s own manual, and the safe-state steps come before every hands-on job. I recommend that you copy the printed minimum and maximum from the cleaner’s label onto a card and keep that card with the washer’s manual. Before you connect one, read the manuals of both the washer and the cleaner and write the printed limits on one card. This is a simple attachment, and the manuals of the cleaner and the washer decide whether it belongs on your wand. If you are also choosing a machine, my best pressure washer roundup compares nine gas, electric and battery models.

Frequently Asked Questions

What is a surface cleaner for a pressure washer?

A surface cleaner for a pressure washer is an attachment that connects to the spray wand and holds a rotating spray bar under a shroud. According to Simpson, its manual says to use the cleaner only on flat horizontal surfaces. Read both the washer’s manual and the cleaner’s manual before you connect it.

What is a pressure washer surface cleaner good for?

A pressure washer surface cleaner is made for large flat areas, and Simpson says it is used for driveways, patios, decks, sidewalks and more. Check the care instructions of the surface or finish maker before you wash, and if they prohibit pressure washing, do not use a different setting as a workaround.

Can I use a surface cleaner with an electric pressure washer?

You can use a surface cleaner with an electric pressure washer only where the cleaner’s maker and the washer’s manual both allow it. Simpson’s product page names most gas-powered washers inside its printed window, so an electric washer is a question for the cleaner’s maker. Never assume that an accessory fits when your washer’s manual names none.

What are the parts of a pressure washer surface cleaner?

The parts of a pressure washer surface cleaner are a shroud, a spray bar with nozzles at its ends, an inlet plug and a swivel. According to Simpson, its 15-inch model has a powder coated steel shroud, stainless steel nozzles and a 1/4 inch quick connect plug. Use only identical replacement parts when you service it, as its manual says.

How does a surface cleaner connect to a pressure washer?

Before you connect or disconnect a surface cleaner, complete the stop and make-safe steps in the safe-state box above. A surface cleaner connects to a pressure washer at the spray wand, where its inlet plug goes into the quick connect coupler, and both manuals apply. Water leaking at the swivel is normal according to Simpson’s manual.

References

  1. Centers for Disease Control and Prevention. Pressure washer safety. Natural Disasters. Published May 15, 2024. Reviewed August 26, 2026. Accessed October 31, 2026.
  2. Johnson C, Newton W, LaRochelle L, Allen J, Daly C. High-pressure injection injuries of the hand in community and industrial settings: incidence and trends. Hand (N Y). 2025;20(6):917-922. doi:10.1177/15589447231218404
  3. Funato N, Sugizaki Y, Ri Y, Ichibayashi R. High-pressure injection damage caused by a high-pressure washer. Cureus. 2024;16(1):e52498. doi:10.7759/cureus.52498
  4. Hogan CJ, Ruland RT. High-pressure injection injuries to the upper extremity: a review of the literature. J Orthop Trauma. 2006;20(7):503-511. doi:10.1097/00005131-200608000-00010
  5. Placide J, Yang MY, Gross AW, Crowell EL. Case series: traumatic ocular lacerations secondary to pressure washers. Am J Ophthalmol Case Rep. 2022;27:101612. doi:10.1016/j.ajoc.2022.101612

Safety Note: Read your pressure washer’s manual before you connect water or power, and follow it. Never point the spray at yourself, another person, a pet or any part of the body. Keep hands and feet away from the nozzle and stream. Get medical care without delay for a spray wound, even if it looks minor at first. Tell the clinician that a pressure washer caused the injury. Wear safety glasses or goggles and closed footwear before operating the washer, plus any additional protection required by the manual and the detergent label. Follow the manual’s instructions for the trigger lock, grip, footing and recoil, and engage the trigger lock whenever you stop spraying. Use only the nozzles, accessories and detergents the manual permits, and never point any nozzle at skin, people or animals. Do not perform a task at height without instructions expressly permitting the equipment and method in the exact manual. Gas models: operate outdoors, never inside a building or a partly enclosed space. Keep the engine at least 20 feet from any window, door or vent, following CDC’s pressure washer guidance and any stricter manual requirement. Exhaust contains carbon monoxide, which cannot be seen or smelled and can kill. Opening doors or windows does not make indoor operation safe. Refuel only with the engine off and cool, following the manual. Corded models: use the manual’s specified electrical supply and GFCI protection, and test the GFCI before use according to its instructions. After an operating GFCI or breaker trip, do not reuse the washer until a qualified repair person has examined it. Where the washer has a grounding prong, connect it to a properly grounded receptacle and never remove the prong. Wear closed, rubber-soled footwear that provides some electrical insulation, plus any additional footwear required by the manual; footwear does not replace GFCI protection or the other electrical precautions. Never cut or splice cords. Use an extension cord only as the manual permits. Keep connections dry and away from runoff, standing water and the washing area, and keep spray away from electrical equipment. Battery models: use only the battery and charger the maker specifies for your exact model. Emergency first: if you notice an unusual odor, a change in color, too much heat, a change in shape, leaking or odd noises from a lithium-ion battery, stop using the washer and follow your battery manual’s emergency instructions. Otherwise, complete the applicable stop and make-safe procedure before hose, nozzle, wand or accessory work, clearing a blockage, cleaning, maintenance, refueling, checking oil, adding detergent, battery changes or charging, draining, moving, transporting, storing or leaving the washer. Follow your exact manual’s procedure and order. Release the trigger and engage its lock. Gas: switch the engine off and wait for it to stop; disconnect the spark plug wire before service as the manual directs, and let hot parts cool before refueling, storage or contact. Corded: switch off and unplug by the plug with dry hands. Battery: switch off, remove a removable battery as the manual directs and keep it away while working; for a built-in battery, follow the manual’s isolation procedure and do not open the battery compartment. Complete the manual’s water-supply shutdown and pressure-relief steps: point the gun in a safe direction at a permitted discharge location, disengage the trigger lock, squeeze the trigger as directed to relieve pressure, then reengage the lock. Do not disconnect hoses or change nozzles until pressure is relieved. If pressure cannot be relieved by the prescribed procedure, obtain service without loosening fittings. Refit and inspect parts before restoring water or power. Replace a damaged high-pressure hose; never repair or patch it. Before you wash, plan how to keep wash water, detergent and debris out of streets, storm drains, ditches and streams, and check with your city or county stormwater office about collection and disposal. Send wash water to landscaping only where local rules and the detergent label permit it and the soil can absorb it without runoff or contamination. Keep children and pets away, and never let a child use the machine. Drain and store the washer as its manual directs. For exposure to a cleaning product, follow the label’s first-aid instructions and call Poison Control at 1-800-222-1222. Call 911 for a fire or immediate danger.

Scroll to Top