The surfaces you can pressure wash are the ones your washer’s own manual names, and a surface on no list needs a closer look before you spray it. Makers print different lists, so one manual names decks and fences while the next names only vehicles and buildings. On the farm I read a product label in full before I open the container, and I read a washer’s intended-use line the same way, before the hose is connected. Below you will find what ten manuals name, what they warn about and what to check first.
What Surfaces Can You Pressure Wash? Start With Your Manual
The surfaces you can pressure wash are the ones your washer’s manual names in its intended-use line, and the care instructions of the surface or its finish can still rule a washer out. That order matters: the manual comes first, the surface maker comes second, and nothing we print here replaces either one. Every list in this article is a maker’s own sentence about what its washer is intended for, and each one is quoted with the model it belongs to.
Read the Intended-Use Line First
Find the line before you connect water or power. It sits under a heading such as Intended Use, Applications or Overview, and it is usually one or two sentences long. Treat that line as the edge of what the maker stands behind, then read the warnings beside it. My advice is to read the warnings twice, because they tell you what the list leaves out.
Many lists end with “etc.” or “and more”. Sun Joe’s lines close with “etc.” and WORX’s with “and more”, which tells you the maker is giving examples and not a full inventory. Ryobi’s footnote adds the sentence that matters most: always test in an inconspicuous area first. A list with an open end is a reason to ask the surface maker, not a permission.
Why a Surface List Is Not a Safety Rating
A list says what the maker designed the washer to do. It does not say that every material in a category will take the spray, and no manual read for this article says so. The stream that cleans a concrete walkway can mark soft wood, lift loose paint or break glass, as the warnings below show. I recommend treating “named in the manual” as the first check and the surface’s own care instructions as the second.
What Ten Washer Manuals Say Each Washer Is For
The table below gives each maker’s own words for the washers in this article’s range. It is a record of what is printed, in the order of the models, and it ranks nothing. Where a manual prints no surface list, the second table cell says so.
| Washer | What the maker’s manual says |
|---|---|
| Sun Joe SPX3000 and SPX3000-XT1 | According to Sun Joe, each is “intended for residential use to clean vehicles, machines, buildings, facades, etc.” |
| Westinghouse ePX3100 and ePX3500 | According to Westinghouse, the washer can be used for a variety of cleaning applications such as cleaning decks and walkways, washing vehicles and equipment, and removing dirt from home exteriors and fences. |
| CRAFTSMAN CMEPW2100 | According to Craftsman, it is “intended for cleaning boats, cars, decks, driveways, grills, house siding, motorcycles, patios, and outdoor furniture.” |
| Greenworks 2000 PSI, model GPW2003 | Greenworks lists “Cleaning boats, cars, trucks, motorcycles, outdoor furniture, grills, house siding, driveways, patios and decks.” |
| Greenworks 3000 PSI brushless, model GPW3002A | Greenworks says it “is used to clean vehicles, boats, buildings, porches, decks, patios, and driveways”, for residential use only. |
| WORX WG605 | According to WORX, it is intended for residential cleaning projects “from porch to patio, driveways and decks, boats, pavers, bricks, BBQs and more.” |
| Ryobi RY141612 | Ryobi says you may use it around the house for “cleaning most small to large horizontal or vertical exterior surfaces, smaller exterior objects and structures, and outdoor equipment and tools,” for outdoor use only. |
| Kärcher K1700 Cube | No intended-use statement. The cleaning tips are headed House Siding, Deck Cleaning, Cement Patios, Brick and Stone, Cars, Boats and Motorcycles, Patio and Lawn Furniture, and Barbecue Grills, Outdoor Power Equipment and Gardening Tools. |
| Westinghouse WPX3200 and WPX3400 (gas) | No surface list. The manual says to use the pressure washer only for intended uses. |
| Simpson PowerShot and Clean Machine (gas) | No surface list. The manual says to use the pressure washer only for its intended purpose and does not define that purpose. |
When a Manual Names No Surfaces
Three of the ten entries give no list at all, and the two gas manuals simply tell you to use the washer for its intended purpose. When the intended use stays unclear, ask the maker before you spray. The Kärcher tips are the closest thing to a list among the three, and they carry their own distances, wait times and area sizes, which belong to your manual and your detergent label.
My rule when a manual stays silent is simple: I treat the job as unlisted. I then ask the maker, or I pick another way to clean that surface.
Where the Manuals Agree and Where They Differ
Put the lists side by side and a few things to pressure wash show up again and again. The agreement is partial, and each line below names the manuals that say it, because no single list speaks for all makers.
Decks, Driveways and Patios
Decks appear in the Westinghouse electric, Craftsman, both Greenworks, WORX and Ryobi lists, and the Kärcher manual has a Deck Cleaning tip. Driveways appear in the Craftsman, Greenworks and WORX lists, and Ryobi names driveways, walkways and sidewalks. Patios appear in the Craftsman, Greenworks, WORX and Ryobi lists, and Kärcher groups cement patios with brick and stone. Ryobi words its deck and driveway line around mold and mildew on weathered surfaces, which is the maker’s description of the job and not a result. Deck jobs get their own steps in my page on pressure washing a deck, including the wood risks.
Siding, House Exteriors and Fences
Craftsman and the Greenworks GPW2003 name house siding. Westinghouse’s electric manual names home exteriors and fences, Ryobi names house exteriors, siding and fences, and Sun Joe names buildings and facades. The manual for the Greenworks 3000 PSI model, which I cover in my Greenworks 3000 PSI washer review, names buildings and porches.
The Kärcher manual has a House Siding tip and says to test an inconspicuous area first. Fences appear in the Westinghouse and Ryobi lists, and your exact model’s manual says whether it names one. My walkthrough of pressure washing a house puts the whole job in order, from plan to cleanup.
I do not know what material your siding or fence is made of, and the lists never say which siding is meant. That is the reason I recommend finding out before you wash. Once you know the material, my pressure washer picks for siding list the corded electric models I recommend.
Vehicles, Boats and Motorcycles
Sun Joe and Westinghouse name vehicles. Craftsman names cars, boats and motorcycles. The Greenworks GPW2003 names cars, trucks, boats and motorcycles, and the Greenworks GPW3002A names vehicles and boats. WORX and Ryobi name boats, and Kärcher has a tip for cars, boats and motorcycles. Automobile paint and trim are the items that other manuals single out as damage risks, as the next section shows. For washing your own vehicle, my roundup of pressure washers for cars picks nine models for home car washing.
Furniture, Grills, Pavers and Brick
Outdoor furniture and grills appear in the Craftsman, Greenworks GPW2003 and Ryobi lists, and Kärcher has tips for both. WORX names BBQs. Pavers and bricks appear in the WORX line, Ryobi names brick, concrete or stone walls, and Kärcher groups brick and stone with cement patios. No manual read for this article names gravel, composite decking, stucco, windows or a roof, so none of them has a maker line to lean on here. Where the surface is a flat patio or slab, my guide to the pressure washer surface cleaner shows its parts, ratings and fit.
My own crushed-stone drive is on none of these lists, and neither is the concrete pad in front of my machinery shed, so I read “concrete” as the nearest word and still check the manual before anything else. For a concrete drive, my roundup of pressure washers for driveways compares nine gas and electric models.
What the Manuals Warn About Before You Spray
The warnings are where the manuals say what their own lists leave out. They are short, and they come from the makers, so I quote them with the model they belong to. None of them gives you a setting, and none should be read as a promise that an unlisted surface is fine. I collect those warnings in my page on the things never to pressure wash.
Fragile Surfaces and Test Spots
The Westinghouse gas manual says that water under high pressure can damage fragile surfaces, and it tells you to practice on an inconspicuous test area to understand when damage may occur. Simpson’s manual names the damage: high-pressure spray can damage plants and surfaces such as wood, glass, automobile paint, auto striping and trim, and delicate objects. It adds that you should cover plants before spraying near them and test surfaces to make sure they are strong enough to withstand the spray.
Westinghouse’s electric manual warns that the washer can break glass if hit with direct contact. Ryobi, Kärcher and Westinghouse each tell you to test an inconspicuous area, Greenworks tells you to try the spray tip in an inconspicuous area first, and Craftsman tells you to test a detergent in an inconspicuous area before use. Every one of those lines asks for a test spot, and none of them gives the number a test would be judged by.
Simpson’s manual also says to cover plants before spraying near them, and I recommend doing that.
Painted Surfaces, Peeling Paint and Food Contact
Sun Joe’s manual says damage may occur to painted surfaces if the detergent is allowed to dry on the surface, and it says to avoid working on hot surfaces or in direct sunlight. Kärcher’s cleaning tips say that if painted surfaces are peeling or chipping, you should use extreme caution, because the washer may remove the loose paint. The same page says that on surfaces which might come in contact with food, you should flush them with plenty of drinking water.
Safe-State Box: Stop and Make Safe
Emergency and routine stops come before any hands-on step. Stop and make safe before you connect or disconnect a hose, change a nozzle, wand or accessory, clear a clogged nozzle, clean a filter, add detergent, refuel, check the oil, drain the washer, move it, store it or leave it. Release the trigger and engage the trigger lock on the spray gun. Gas washer: turn the engine off with its switch as the manual says and wait until all moving parts have stopped. Let the engine and the muffler cool for the time your manual gives before you refuel, store the washer or touch hot parts, and disconnect the spark plug wire before maintenance where your manual directs it. Corded electric washer: turn the washer off with its power switch and wait until all moving parts have stopped. Every washer, after the steps above for your type: follow your manual’s water-supply shutdown and pressure-relief procedure. Point the gun away from people, pets and electrical equipment at a discharge location your manual and the detergent label permit. Disengage the trigger lock, squeeze the trigger to relieve the trapped pressure as the manual directs, then engage the lock again. Then unplug a corded washer by the plug, not by the cord, with dry hands. Do not disconnect hoses or change nozzles before the pressure is relieved. If the manual’s procedure does not release the pressure, stop and get service; do not loosen a fitting to release it. Only then disconnect hoses or change nozzles. Where your manual gives a different order for these steps, follow your manual’s order. Follow every applicable step in your manual, in the order it specifies, and check that every hose, fitting and nozzle is attached and undamaged before water or power goes back on.
A detergent changes the picture, because the manual and the label decide which products your washer may use. Use only the detergents your manual allows, and read the detergent label before you open it.
Detergent and Surface
Before you add detergent or connect or adjust a detergent accessory, complete the applicable stop and make-safe steps in the safe-state box. Use only the detergents your manual allows, through the detergent system the manual describes, and read the detergent label before you open it. Wear the protective equipment the detergent label requires, and avoid contact of detergent with your eyes and skin. Do not run a detergent that your manual does not name through the pump.
Old Treated Decks and Older Paint Need Extra Care
Two kinds of surface carry a hazard that has nothing to do with how the washer is set. One is an old pressure-treated deck, and the other is older exterior paint. In both cases the question is where the dislodged material goes, and the sources below say what they say about it.
Old Pressure-Treated Wood
University of Florida researchers tested three deck-cleaning methods on wood treated with chromated copper arsenate (CCA) from a 25-year-old deck. Wet CCA wood released more surface arsenic than dry CCA wood, and cleaning that CCA wood with bleach left hexavalent chromium on the surface and in the runoff (1). The authors concluded that old CCA wood still poses exposure risks and a potential for soil contamination.
The study tested tap water, bleach and pressure washing on CCA wood, so it does not say that pressure washing alone releases arsenic. What it does give you is a practical caution: keep rinse water out of the soil and the drains, and keep children and pets off a wet old deck. The university’s news release adds that decks built before 2004 were often treated this way, which is a statement about common building practice and not a test you can apply to your own deck.
Older Exterior Paint
Simpson’s manual says that exterior paints used before 1977 may contain lead and will produce chips that need to be collected and disposed of at a hazardous waste facility. EPA’s lead-based paint program FAQ says that pressure washing is not a prohibited practice under its renovation rule and is subject to the same containment requirements as other permissible work practices. The same FAQ says to dispose of wash water properly and to check with the local water treatment authority.
Start with EPA’s lead pages and your manual’s warning about loose paint before any older painted wall gets a spray.
When the Surface or Finish Maker Says No
A washer manual describes the washer. The maker of your siding, deck board, window or vehicle finish describes the surface, and the two can disagree. When they do, the surface maker’s restriction stands.
Check Both Manuals
Check both your washer’s manual and the care instructions of the surface or finish maker before you wash, and follow their restrictions. If they prohibit pressure washing, do not use a different nozzle or setting as a workaround.
A different nozzle, a longer distance or a gentler setting is not a way around a maker’s prohibition, and no list in this article offers one. If the care instructions rule out a washer, use the cleaning method they give. My page on washer nozzle colors shows what each maker prints for its tips.
I recommend keeping the surface maker’s sheet next to the washer manual while you work. Two short documents settle most of the questions that a long search leaves open.
Short Safety Block and Where the Wash Water Goes
Choosing a surface is only the first decision. The spray itself is the hazard, and the points below come before any surface does.
Read the Manual
Read the pressure washer’s manual before you connect water or power, and follow it. Its warnings, its operator rules and its steps for your exact model come before anything in this article.
The Spray and the Gun
CDC warns that the strong spray from a pressure washer can cause serious wounds that might first appear minor (2). An analysis of US emergency department records found that pressure washers account for far more hand injection injuries than paint equipment does (3). Case reports describe infection, compartment syndrome and, in some cases, amputation after a washer injection injury (4).
Spray Injuries
Never point the spray at yourself, another person, a pet or any part of the body. Keep your hands and feet away from the nozzle and the stream. Get medical care without delay for a spray wound, even if it looks minor at first. Tell the clinician that a pressure washer caused the injury.
Eyes are at risk too. A case series of three patients who used pressure washers describes blunt and sharp eye injuries, all treated surgically, with poor final vision in every case (5).
Protective Equipment
Wear safety glasses or goggles and closed footwear when you operate the washer, and put them on before you start; where your manual requires goggles, side shields or a face shield, that requirement replaces the minimum here. Follow the manual’s additional protective-equipment requirements, including hearing protection where the manual requires it, and the detergent label’s requirements when you handle detergent. Keep your hands and feet away from the spray. Protective equipment does not make contact with the stream safe.
Trigger Lock, Grip and Footing
Engage the trigger lock on the spray gun whenever you stop spraying, even for a moment, before you set the gun down, and before you walk away or change position. Disengage the lock only for controlled spraying or for the manual’s pressure-relief procedure, with the gun pointed in a safe direction. Hold and brace the spray gun as your manual instructs, keep firm footing on a surface that is not slippery, and follow your manual’s warning about the push of the gun when you squeeze the trigger. Start the stream away from your feet and from anyone else, and never swing the gun toward people or pets as you turn.
Heights, Cords and Outlets
House and fence jobs tempt people onto a ladder. Simpson’s manual says not to use the pressure washer while standing on a ladder, because the reactive force of the spray can cause the operator to slip or fall.
Work at Height
Do not use a pressure washer for a task at height, such as from a ladder, unless your manual expressly permits the equipment and the method.
A house wall also has outlets, lights and wiring on it. If you use a corded washer, the electrical rules apply before the spray does.
Corded Washers
Use the electrical supply and the GFCI protection your manual specifies, and test the GFCI before use according to its instructions. If the washer trips a GFCI or a circuit breaker while you use it, stop using it and have a qualified repair person examine it before you use it again; do not keep resetting it and carry on. Where the washer has a grounding prong, connect it to a properly grounded receptacle and never remove the prong. Never cut or splice a power cord or an extension cord. Wear closed, rubber-soled footwear that gives some electrical insulation, plus any additional footwear the manual requires; footwear does not replace GFCI protection or the other electrical precautions. Use an extension cord only if your manual permits it, and then only the type and length it names. Keep every plug and cord connection dry, out of standing water and away from runoff and the area you are washing, and keep the spray away from outlets, wiring and electrical equipment. Do not use a damaged cord or plug.
Wash Water
Wash water does not disappear when the job ends. EPA explains that a storm drain carries what enters it to local waters without treatment, and its guidance on washing vehicles asks residents to limit detergent and keep wash water out of the drain (6). That sheet is written for vehicles, and local rules differ from town to town.
Plan the Runoff
Before you wash, plan how to keep wash water, detergent and debris out of streets, storm drains, ditches and streams, because a storm drain carries what enters it to local waters without treatment. Check with your city or county stormwater office about collecting and disposing of the wash water for the job. Send wash water to landscaping only where local rules and the detergent label permit it and the soil can absorb it without runoff or contamination. Otherwise contain and collect it for an approved disposal route. Do not assume that water carrying oil, paint debris, pesticide residue or material from an old treated deck is suitable for a lawn.
On a farm the pad drains somewhere, and I want to know where before the first drop falls. That one question has more to do with a clean job than any nozzle.
What to Take From the Manuals
Three points carry the article. Your manual’s intended-use line names the surfaces, the warnings narrow that list, and the surface maker has the last word. My tip is to copy the intended-use line onto a card and tape it inside the shed door, so the list is in front of you before the hose is. Before you spray, my guide on how to use a pressure washer gives the order the manuals give, step by step.
Pavers, brick and a grill each have maker lines worth reading, and the questions below take them in turn. When you are done with those, you will know which surfaces a pressure washer is meant to clean and how to check your own. When you are ready to buy, my roundup of pressure washers for home use compares nine corded and battery models.
Frequently Asked Questions
What can you pressure wash?
You can pressure wash the surfaces and objects your washer’s manual names, which in the manuals above run from decks, driveways and patios to siding, fences, vehicles, boats, furniture and grills. Your manual and the surface maker’s care instructions decide the final list.
Can you pressure wash pavers?
Pavers are named in WORX’s WG605 manual, which lists pavers and bricks among its residential cleaning projects. Ryobi, Greenworks and Craftsman do not list pavers by name, so check your own manual and your paver maker’s instructions before you spray.
Can you pressure wash brick?
Brick is named in the WORX WG605 manual, in Ryobi’s list of brick, concrete or stone walls, and in Kärcher’s Brick and Stone tip. Your own manual’s list and your wall’s condition decide, so test an inconspicuous area first as the manual says.
Can you pressure wash a grill?
Grills are named in the Craftsman, Greenworks GPW2003 and Ryobi lists, in WORX’s BBQs and in a Kärcher tip for barbecue grills. Your manual and the grill maker’s care instructions both apply, and a grill’s finish counts as a surface to test.
Can you pressure wash a motorcycle?
Motorcycles are named in the Craftsman and Greenworks GPW2003 lists and in a Kärcher tip for cars, boats and motorcycles. Paint and trim are the items Simpson’s manual singles out as damage risks, so read that warning and your own manual first.
References
- Gress J, de Oliveira LM, da Silva EB, et al. Cleaning-induced arsenic mobilization and chromium oxidation from CCA-wood deck: potential risk to children. Environ Int. 2015;82:35-40. doi:10.1016/j.envint.2015.04.012
- Centers for Disease Control and Prevention. Pressure washer safety. Natural Disasters. Published May 15, 2024. Reviewed August 26, 2026. Accessed October 31, 2026.
- Johnson C, Newton W, LaRochelle L, Allen J, Daly C. High-pressure injection injuries of the hand in community and industrial settings: incidence and trends. Hand (N Y). 2025;20(6):917-922. doi:10.1177/15589447231218404
- Funato N, Sugizaki Y, Ri Y, Ichibayashi R. High-pressure injection damage caused by a high-pressure washer. Cureus. 2024;16(1):e52498. doi:10.7759/cureus.52498
- Placide J, Yang MY, Gross AW, Crowell EL. Case series: traumatic ocular lacerations secondary to pressure washers. Am J Ophthalmol Case Rep. 2022;27:101612. doi:10.1016/j.ajoc.2022.101612
- US Environmental Protection Agency. Stormwater best management practice: vehicle maintenance and washing. EPA-832-F-21-032F. February 2023.
Safety Note: Read your pressure washer’s manual before you connect water or power, and follow it. Never point the spray at yourself, another person, a pet or any part of the body. Keep hands and feet away from the nozzle and stream. Get medical care without delay for a spray wound, even if it looks minor at first. Tell the clinician that a pressure washer caused the injury. Wear safety glasses or goggles and closed footwear before operating the washer, plus any additional protection required by the manual and the detergent label. Follow the manual’s instructions for the trigger lock, grip, footing and recoil, and engage the trigger lock whenever you stop spraying. Use only the nozzles, accessories and detergents the manual permits, and never point any nozzle at skin, people or animals. Do not perform a task at height without instructions expressly permitting the equipment and method in the exact manual. Gas models: operate outdoors, never inside a building or a partly enclosed space. Keep the engine at least 20 feet from any window, door or vent, following CDC’s pressure washer guidance and any stricter manual requirement. Exhaust contains carbon monoxide, which cannot be seen or smelled and can kill. Opening doors or windows does not make indoor operation safe. Refuel only with the engine off and cool, following the manual. Corded models: use the manual’s specified electrical supply and GFCI protection, and test the GFCI before use according to its instructions. After an operating GFCI or breaker trip, do not reuse the washer until a qualified repair person has examined it. Where the washer has a grounding prong, connect it to a properly grounded receptacle and never remove the prong. Wear closed, rubber-soled footwear that provides some electrical insulation, plus any additional footwear required by the manual; footwear does not replace GFCI protection or the other electrical precautions. Never cut or splice cords. Use an extension cord only as the manual permits. Keep connections dry and away from runoff, standing water and the washing area, and keep spray away from electrical equipment. Battery models: use only the battery and charger the maker specifies for your exact model. Emergency first: if you notice an unusual odor, a change in color, too much heat, a change in shape, leaking or odd noises from a lithium-ion battery, stop using the washer and follow your battery manual’s emergency instructions. Otherwise, complete the applicable stop and make-safe procedure before hose, nozzle, wand or accessory work, clearing a blockage, cleaning, maintenance, refueling, checking oil, adding detergent, battery changes or charging, draining, moving, transporting, storing or leaving the washer. Follow your exact manual’s procedure and order. Release the trigger and engage its lock. Gas: switch the engine off and wait for it to stop; disconnect the spark plug wire before service as the manual directs, and let hot parts cool before refueling, storage or contact. Corded: switch off and unplug by the plug with dry hands. Battery: switch off, remove a removable battery as the manual directs and keep it away while working; for a built-in battery, follow the manual’s isolation procedure and do not open the battery compartment. Complete the manual’s water-supply shutdown and pressure-relief steps: point the gun in a safe direction at a permitted discharge location, disengage the trigger lock, squeeze the trigger as directed to relieve pressure, then reengage the lock. Do not disconnect hoses or change nozzles until pressure is relieved. If pressure cannot be relieved by the prescribed procedure, obtain service without loosening fittings. Refit and inspect parts before restoring water or power. Replace a damaged high-pressure hose; never repair or patch it. Before you wash, plan how to keep wash water, detergent and debris out of streets, storm drains, ditches and streams, and check with your city or county stormwater office about collection and disposal. Send wash water to landscaping only where local rules and the detergent label permit it and the soil can absorb it without runoff or contamination. Keep children and pets away, and never let a child use the machine. Drain and store the washer as its manual directs. For exposure to a cleaning product, follow the label’s first-aid instructions and call Poison Control at 1-800-222-1222. Call 911 for a fire or immediate danger.

