A cold-water electric pressure washer and a hot-water gas pressure washer side by side on a concrete driveway

Pressure Washer vs Power Washer: What the Two Names Really Mean

The pressure washer vs power washer question has a short answer: the two names often describe the same cold-water machine, and the manual tells you more than the word on the box. Where a maker separates them, a power washer is the one that heats its water, and the manuals of the home washers below all say cold water only. My plant protection training taught me to read a label before I open anything, and I read a washer’s manual the same way. Below I cover where each name comes from, what six manuals print and how to stay safe around the stream.

Pressure Washer vs Power Washer, Answered Briefly

Makers and sellers use both names for cold-water machines, so the noun alone tells you nothing about what you are buying. Alkota, a maker of hot-water machines, says that from its perspective pressure washers and power washers are the same thing, and that region and habit decide which word people use. It adds that some people reserve power washer for machines that use heat.

That leaves two readings of the two names. In one, the words name one machine. In the other, power washer means the water is heated before it reaches the gun. I treat the second reading as a trade habit that changes from region to region, and I never let it stand in for the manual.

The difference between power washer and pressure washer matters at one point only: the water line in the manual. That line decides what may enter the machine, so it is the first thing I read.

What a Pressure Washer Is

A motor, an engine or a battery drives a pump that raises the pressure of garden hose water, and the water travels through a high-pressure hose to a spray gun, wand and nozzle, the path my answer to “how does a pressure washer work” follows part by part. Only the maker’s printed figures describe a given machine.

Those figures are PSI, the pressure at the nozzle, and GPM, the flow of water, which my guide to PSI and GPM ratings takes further. According to Westinghouse, the WPX3400 is rated at 3400 PSI and 2.6 GPM. I read each rating as one maker’s figure for one model, and I never rank one maker’s number against another’s.

What Is a Power Washer?

A power washer is a name with two uses. Some people apply it to a machine that heats its water, and others use it for the same cold-water machine that another maker calls a pressure washer. One cold-water kit is sold under both names, as the next section shows.

When the Name Means Hot Water

Alkota says some people use power washer for machines that run on heat. Alkota calls its own heated machines hot water pressure washers and its unheated ones cold water pressure washers, so even a hot-water maker keeps the words pressure washer in the product name. Heat changes the hazards: University of California Agriculture and Natural Resources lists thermal burns to the hands among the injuries in federal injury data from 2003, next to the wounds from the stream itself.

I keep a machine that heats its water out of every recommendation I make, and the home washers on this page are cold-water machines. A reader who needs heated water needs a maker’s manual for that exact machine and its own safety steps.

When the Name Means the Same Machine

EGO sells the HPW3204-2 under a title that carries both words: pressure washer kit and 3200 PSI power washer. EGO’s operator’s manual for the machine, the HPW3200 without the batteries and charger that the kit adds, is titled a 56-volt lithium-ion pressure washer. It says never use hot water or water from pools, lakes and the like. My EGO against Greenworks pressure washer comparison puts that kit next to the Greenworks GPW3002A.

The same sales title therefore names a cold-water battery machine with both words. A seller’s noun is a label, and the manual is the specification.

How Makers Label Their Machines

The table sets six home washers side by side with the name each maker’s manual or product page gives and the water rule it prints. Choosing between the two on a shelf comes down to the type, the printed ratings and the water line. The type decides where you may run the machine and what the stop and make-safe steps look like. My list of pressure washers for home use shows corded and battery models side by side.

Six home washers: the name and the water rule the maker prints
Model Type Name in the maker’s manual or page Water rule printed
Westinghouse WPX3400 Gas (engine) WPX3400 Pressure Washer “ONLY use cold water”
Westinghouse ePX3500 Corded electric Electric Pressure Washer “Cold Water Only”
CRAFTSMAN CMEPW2100 Corded electric Electric Pressure Washer CMEPW2100 “Inlet Water Cold Tap”
Greenworks GPW3002A Corded electric Pressure Washer operator manual “Do not use hot water”
Kärcher K1700 Cube Corded electric Electric Pressure Washer “(Cold Water Only)”
EGO HPW3204-2 kit Battery 56-Volt Lithium-Ion Pressure Washer (manual of the HPW3200) “NEVER use hot water”

Reading the Rest of the Label

The type comes first. I never guess a machine’s power source from its name, and I look in the manual for the engine, the cord or the battery. Gas against electric is its own comparison, covered in my gas vs electric pressure washer guide, so here one rule is enough: the type sets the safety steps, and the name sets nothing.

The printed ratings come next, each with the maker’s own basis word such as rated, maximum or up to. A rating is a maker’s figure, and I read it with its basis word attached. I also check what the box contains, because a kit that adds batteries, a charger or accessories is a different product from the bare machine. My guide to the PSI a pressure washer needs shows how to read the printed rating.

Why a Home Washer Takes Cold Water Only

Every manual in the table states the water rule as a prohibition. Westinghouse says in the WPX3400 manual never to connect the washer to a hot water supply and not to pour hot water on or into the pump. Its ePX3500 manual says to never use hot water with the washer. Greenworks says in the manual of the GPW3002A, the washer in my Greenworks 3000 PSI washer review, not to use hot water and lists a maximum inlet water temperature of 104 °F (40 °C).

Kärcher says the water supply temperature of the K1700 Cube, the washer in my K1700 Cube review, must not exceed 104°F (40°C), and the WPX3400 spec block lists the same inlet maximum. No manual here offers a workaround, so a hot supply is a prohibition and there is nothing to adjust. If a job calls for heated water, none of these home washers is the answer.

Pump Heat Is a Different Matter

Westinghouse says running the WPX3400, the gas washer in my Westinghouse WPX3400 washer review, for more than a minute without spraying lets heat build in the pump. The thermal relief valve then opens and discharges hot water onto the ground, and the manual warns that running without spraying can damage pump components and void the warranty. That discharge comes from the pump after a pause, so it says nothing about hot water as a supply.

Connecting the Hose Safely

Connecting the hose is the first hands-on step on any of these machines, so the safe-state box comes before it.

Stop and Make Safe

Emergency first, for a washer with a battery: if you notice an unusual odor, a change in color, too much heat, a change in shape, leaking or odd noises from a lithium-ion battery, stop using the washer and follow your battery manual’s emergency instructions. Stop and make safe before you connect or disconnect a hose, change a nozzle, wand or accessory, clear a clogged nozzle, clean a filter, add detergent, refuel, check the oil, charge or change a battery, drain the washer, move it, store it or leave it. Release the trigger and engage the trigger lock on the spray gun. Gas washer: turn the engine off with its switch as the manual says and wait until all moving parts have stopped. Let the engine and the muffler cool for the time your manual gives before you refuel, store the washer or touch hot parts, and disconnect the spark plug wire before maintenance where your manual directs it. Corded electric washer: turn the washer off with its power switch and wait until all moving parts have stopped. Battery washer: turn the washer off and wait until all moving parts have stopped. Every washer, after the steps above for your type: follow your manual’s water-supply shutdown and pressure-relief procedure. Point the gun away from people, pets and electrical equipment at a discharge location your manual and the detergent label permit. Disengage the trigger lock, squeeze the trigger to relieve the trapped pressure as the manual directs, then engage the lock again. Then unplug a corded washer by the plug, not by the cord, with dry hands, or remove the battery from a battery washer as your manual directs and keep it away from the washer while you work. Do not disconnect hoses or change nozzles before the pressure is relieved. If the manual’s procedure does not release the pressure, stop and get service; do not loosen a fitting to release it. Only then disconnect hoses or change nozzles. Where your manual gives a different order for these steps, follow your manual’s order. Follow every applicable step in your manual, in the order it specifies, and check that every hose, fitting and nozzle is attached and undamaged before water or power goes back on.

Before you inspect parts or connect hoses, complete the applicable stop and make-safe steps in the safe-state box above. Inspect the high-pressure hose, the spray gun and every fitting before each use, as your manual describes, and do not use a damaged part. Replace a damaged high-pressure hose; never repair or patch it. Connect the hoses and turn on the water before you start the machine, and purge and start it in the order your manual specifies.

Read the pressure washer’s manual before you connect water or power, and follow it. Its warnings, its operator rules and its steps for your exact model come before anything in this article.

I give a washer’s inlet the same attention as the pump head of my drip irrigation system, where I keep a 150-mesh disc filter: a clean supply from a source the manual allows. For a washer that source is the one the maker’s manual names.

When Someone Quotes You for Power Washing

A quote or a rental sheet that says power washing can mean either machine, because the word follows regional habit. When I get a quote with that wording, I ask which machine is coming and whether it heats the water. A clear answer in the contractor’s own words settles it.

The same check works at a rental counter. Ask for the machine’s manual, read its water line and its type, and follow it. If a surface maker or a manual forbids pressure washing, no washer is the answer, and a different setting is no workaround.

Safety Whichever Name You Use

A pressure washer turns a garden hose into a stream that can cut skin and inject fluid under it, whatever the box calls it. The stream is the hazard that looks smallest and costs most. An analysis of US emergency department records found that pressure washers were the leading source of hand injection injuries (1). A case report describes a washer injury that can lead to infection, compartment syndrome and in some cases amputation, and the wound can look minor at first (2).

The Stream and Your Body

Never Point the Spray at People

Never point the spray at yourself, another person, a pet or any part of the body. Keep your hands and feet away from the nozzle and the stream. Get medical care without delay for a spray wound, even if it looks minor at first. Tell the clinician that a pressure washer caused the injury.

CDC gives the same advice about a wound that looks minor (3). The eyes are at risk too: a case series of three patients describes serious eye injuries after pressure washer use, all treated surgically (4).

Protective Equipment

Wear safety glasses or goggles and closed footwear when you operate the washer, and put them on before you start; where your manual requires goggles, side shields or a face shield, that requirement replaces the minimum here. Follow the manual’s additional protective-equipment requirements, including hearing protection where the manual requires it, and the detergent label’s requirements when you handle detergent. Keep your hands and feet away from the spray. Protective equipment does not make contact with the stream safe.

The WPX3400 manual tells you to wear safety goggles and says safety glasses are not the same, and the K1700 Cube manual calls for goggles or a face shield and says safety glasses do not provide full protection. My rule is to read the manual’s eye-protection line first and put the protection on before the machine starts.

Trigger Lock and Footing

Engage the trigger lock on the spray gun whenever you stop spraying, even for a moment, before you set the gun down, and before you walk away or change position. Disengage the lock only for controlled spraying or for the manual’s pressure-relief procedure, with the gun pointed in a safe direction. Hold and brace the spray gun as your manual instructs, keep firm footing on a surface that is not slippery, and follow your manual’s warning about the push of the gun when you squeeze the trigger. Start the stream away from your feet and from anyone else, and never swing the gun toward people or pets as you turn.

Heights

Do not use a pressure washer for a task at height, such as from a ladder, unless your manual expressly permits the equipment and the method.

Gas, Corded and Battery Machines

The three types add one more hazard each, and the name on the box never tells you which one applies. Check the type in the manual first.

Gas Exhaust

Operate a gas pressure washer outdoors, never inside a building or a partly enclosed space. CDC says to keep it at least 20 feet from any window, door or vent, and your manual may set a stricter placement, which you follow. Engine exhaust contains carbon monoxide, which you cannot see or smell and which can kill. Opening a door or a window does not make it safe to run an engine inside. If anyone develops symptoms such as headache, dizziness, weakness, nausea or confusion, move to fresh air and get emergency medical care.

Refuelling a Gas Washer

Before you refuel, complete the applicable stop and make-safe steps in the safe-state box, including letting the engine cool as the manual directs. Add only the fuel and oil the manual names, keep fuel away from flame and sparks, and wipe up spilled fuel before you start the engine. The engine and the muffler stay hot after the engine stops, so keep your hands, skin and clothing away from them.

The WPX3400 in the table is a gas model, so this applies to it. A corded model puts mains electricity beside water, and the Consumer Product Safety Commission has warned since 1983 of fatal shock from electric washers (5).

Corded Electricity

Use the electrical supply and the GFCI protection your manual specifies, and test the GFCI before use according to its instructions. If the washer trips a GFCI or a circuit breaker while you use it, stop using it and have a qualified repair person examine it before you use it again; do not keep resetting it and carry on. Where the washer has a grounding prong, connect it to a properly grounded receptacle and never remove the prong. Never cut or splice a power cord or an extension cord. Wear closed, rubber-soled footwear that gives some electrical insulation, plus any additional footwear the manual requires; footwear does not replace GFCI protection or the other electrical precautions. Use an extension cord only if your manual permits it, and then only the type and length it names. Keep every plug and cord connection dry, out of standing water and away from runoff and the area you are washing, and keep the spray away from outlets, wiring and electrical equipment. Do not use a damaged cord or plug.

Battery Machines

Use only the battery and the charger the maker specifies for your exact pressure washer, and charge, store and handle them only as your manual describes. Before you change or charge the battery, follow the emergency exception and the applicable stop and make-safe steps in the safe-state box. Lithium-ion batteries can overheat and catch fire (thermal runaway), so do not use a damaged battery or charger. If you notice an unusual odor, a change in color, too much heat, a change in shape, leaking or odd noises from a battery, stop using it and follow your battery manual’s emergency instructions.

The EGO HPW3204-2 in the table is a battery machine, so this applies to it. Children and pets stay away from the work area while the machine runs, and a child never uses it.

Read the Label Before You Trust the Name

Three things to remember: the names overlap, the manual sets the water rule and the type sets the safety steps. My tip is to find the water line before you buy or rent, and to write the maker’s own words on the first page of the manual so the next person finds them. Next, read the manual’s start-up steps for your exact model before you connect a hose. Whatever a seller calls it, the pressure washer vs power washer question is settled by the manual in your hands.

Frequently Asked Questions

What is the difference between a power washer and a pressure washer?

The difference between a power washer and a pressure washer is mostly the name, because makers and sellers use both words for the same cold-water machine. Where a maker separates them, power washer means a machine that heats its water. The manual’s water line and its printed ratings describe the machine, and the noun does not.

What is a power washer?

A power washer is a name that some people give to a machine that heats its water and others use for an ordinary cold-water pressure washer. Alkota, a maker of hot-water machines, says from its perspective the two terms mean the same thing. The manual shows which machine you have.

What is a power washer used for?

A power washer is used for the same outdoor cleaning jobs as a pressure washer: it sprays hose water at high pressure through a gun and wand. The manual of the exact machine lists the jobs it allows. If a manual or a surface maker forbids pressure washing, no washer is the answer.

Is an electric power washer different from a gas pressure washer?

An electric power washer differs from a gas pressure washer in how it is powered: a motor on a cord or a battery against an engine that burns fuel. The name tells you nothing about the power source, so read it in the manual. Run a gas model only outdoors and at least 20 feet from any window, door or vent, as CDC says.

Is a power cleaner the same as a pressure washer?

A power cleaner is the same as a pressure washer only when its manual describes the same machine. The name on a box or a quote does not settle that, while the manual shows the type, the printed ratings and the water rule. Check those before you buy or rent it.

References

  1. Johnson C, Newton W, LaRochelle L, Allen J, Daly C. High-pressure injection injuries of the hand in community and industrial settings: incidence and trends. Hand (N Y). 2025;20(6):917-922. doi:10.1177/15589447231218404
  2. Funato N, Sugizaki Y, Ri Y, Ichibayashi R. High-pressure injection damage caused by a high-pressure washer. Cureus. 2024;16(1):e52498. doi:10.7759/cureus.52498
  3. Centers for Disease Control and Prevention. Pressure washer safety. Natural Disasters. Published May 15, 2024. Reviewed August 26, 2026. Accessed October 31, 2026.
  4. Placide J, Yang MY, Gross AW, Crowell EL. Case series: traumatic ocular lacerations secondary to pressure washers. Am J Ophthalmol Case Rep. 2022;27:101612. doi:10.1016/j.ajoc.2022.101612
  5. US Consumer Product Safety Commission. Commission issues pressure washer warning. News release 83-043. July 21, 1983.

Safety Note: Read your pressure washer’s manual before you connect water or power, and follow it. Never point the spray at yourself, another person, a pet or any part of the body. Keep hands and feet away from the nozzle and stream. Get medical care without delay for a spray wound, even if it looks minor at first. Tell the clinician that a pressure washer caused the injury. Wear safety glasses or goggles and closed footwear before operating the washer, plus any additional protection required by the manual and the detergent label. Follow the manual’s instructions for the trigger lock, grip, footing and recoil, and engage the trigger lock whenever you stop spraying. Use only the nozzles, accessories and detergents the manual permits, and never point any nozzle at skin, people or animals. Do not perform a task at height without instructions expressly permitting the equipment and method in the exact manual. Gas models: operate outdoors, never inside a building or a partly enclosed space. Keep the engine at least 20 feet from any window, door or vent, following CDC’s pressure washer guidance and any stricter manual requirement. Exhaust contains carbon monoxide, which cannot be seen or smelled and can kill. Opening doors or windows does not make indoor operation safe. Refuel only with the engine off and cool, following the manual. Corded models: use the manual’s specified electrical supply and GFCI protection, and test the GFCI before use according to its instructions. After an operating GFCI or breaker trip, do not reuse the washer until a qualified repair person has examined it. Where the washer has a grounding prong, connect it to a properly grounded receptacle and never remove the prong. Wear closed, rubber-soled footwear that provides some electrical insulation, plus any additional footwear required by the manual; footwear does not replace GFCI protection or the other electrical precautions. Never cut or splice cords. Use an extension cord only as the manual permits. Keep connections dry and away from runoff, standing water and the washing area, and keep spray away from electrical equipment. Battery models: use only the battery and charger the maker specifies for your exact model. Emergency first: if you notice an unusual odor, a change in color, too much heat, a change in shape, leaking or odd noises from a lithium-ion battery, stop using the washer and follow your battery manual’s emergency instructions. Otherwise, complete the applicable stop and make-safe procedure before hose, nozzle, wand or accessory work, clearing a blockage, cleaning, maintenance, refueling, checking oil, adding detergent, battery changes or charging, draining, moving, transporting, storing or leaving the washer. Follow your exact manual’s procedure and order. Release the trigger and engage its lock. Gas: switch the engine off and wait for it to stop; disconnect the spark plug wire before service as the manual directs, and let hot parts cool before refueling, storage or contact. Corded: switch off and unplug by the plug with dry hands. Battery: switch off, remove a removable battery as the manual directs and keep it away while working; for a built-in battery, follow the manual’s isolation procedure and do not open the battery compartment. Complete the manual’s water-supply shutdown and pressure-relief steps: point the gun in a safe direction at a permitted discharge location, disengage the trigger lock, squeeze the trigger as directed to relieve pressure, then reengage the lock. Do not disconnect hoses or change nozzles until pressure is relieved. If pressure cannot be relieved by the prescribed procedure, obtain service without loosening fittings. Refit and inspect parts before restoring water or power. Replace a damaged high-pressure hose; never repair or patch it. Before you wash, plan how to keep wash water, detergent and debris out of streets, storm drains, ditches and streams, and check with your city or county stormwater office about collection and disposal. Send wash water to landscaping only where local rules and the detergent label permit it and the soil can absorb it without runoff or contamination. Keep children and pets away, and never let a child use the machine. Drain and store the washer as its manual directs. For exposure to a cleaning product, follow the label’s first-aid instructions and call Poison Control at 1-800-222-1222. Call 911 for a fire or immediate danger.

Scroll to Top