A man using an earth auger next to a manual clamshell post hole digger in a yard

Earth Auger vs Manual Post Hole Digger: How to Choose by Job Size and Soil

The earth auger vs manual post hole digger choice comes down to the number of holes and the ground under them: a manual post hole digger suits a few holes in workable soil, and an earth auger suits a row of them. I work an orchard, a hedgerow and a farm yard, so I meet both jobs, one lonely hole and a long line of posts. A motor saves your arms, but it adds a bit that can bind, fuel or charging, and a longer safety routine. Below I compare how each tool digs, what stops it, what the motor adds, and who each one fits.

Earth Auger vs Manual Post Hole Digger: The Short Answer

In the post hole digger and auger debate, the hand tool is the right one when the job is one hole or a handful of holes in workable soil. An earth auger is the right tool when you have a line of posts in soil the bit can turn through, and you are ready for the extra safety work. Roots and stones can stop either tool. I judge a hole tool by the job count first and the tool second.

Key Takeaway

Pick the hand tool for a few holes in workable soil. Pick the powered auger for many holes in ground the bit can turn through. Whatever you pick, have the buried lines marked before the first hole.

How Each Tool Digs a Hole

The two tools remove soil in very different ways, and the difference explains almost everything else in this comparison. One relies on your arms and back. The other relies on a power head and a spiral steel bit. If the power head side is new to you, my explainer “what is an earth auger” covers the parts, types and uses.

The Manual Post Hole Digger

A manual post hole digger is a pair of blades on two long handles. You drive the blades into the ground, spread the handles apart to grip a load of soil, and lift it out. Every inch of depth is earned by repeating that motion, and the work comes from your arms, back and legs. My explainer on what post hole diggers are covers hand tools, power augers and tractor diggers.

There is no engine, no battery and no bit that can bind, so the tool does not twist in your hands. A large stone or a root still stops the blades. I like how plain it is: nothing to fuel, nothing to charge, and a quick wipe puts it back on the shed wall.

The Earth Auger

An earth auger is a power head with a spiral steel bit. The power head is a gas engine, either 2-stroke or 4-stroke, or a battery motor, and it drives the bit through a gearbox. According to Echo, the sealed gear case in its EA-400 and EA-500 manual (2005 edition) gives a 30.2 to 1 reduction, which turns engine speed into slow, strong turning at the bit. I look at the gear case first on any power head, because that is where the work gets done. My guide to “how does an earth auger work” explains the power head, the bit and the torque in more detail.

The bit screws into the ground and its flights carry loose soil up toward the surface. Makers print the bit sizes they sell, for example 6, 8 and 10 inches for the Echo EA-400 and EA-500 and 100 to 250 millimeters for the EGO EG0800E (Australia and New Zealand edition). Those are printed sizes, not digging results. Tractor and skid steer augers are implements for larger machines with their own manuals and sit outside this comparison; I cover the tractor choice in my earth auger vs tractor post hole digger guide.

Side-by-Side Comparison

The table sets the two tools next to each other on the points that decide a purchase. Figures in the auger column are makers’ printed numbers, and a printed maximum is a ceiling, not a promise for hard ground.

Earth auger and manual post hole digger compared
Point Earth auger Manual post hole digger
Who does the work A gas engine or battery motor turns the bit. You guide the machine and resist its twist. You do all of it with your arms, back and legs.
Hole size Set by the bit. Makers list sizes such as 6, 8 and 10 inches (Echo EA-400 and EA-500). Set by the width of the blades.
Depth The maker’s printed maximum with a named bit. The Ryobi RY40701 manual prints a maximum hole depth of 31 inches and a recommended maximum of about 24 inches. Limited by the handle length and your reach.
What stops it A root, rock or buried object can bind the bit and twist the machine. A stone or root stops the blades. There is no motor torque to twist the tool.
Fuel and charging Mixed fuel and oil, or oil for a 4-stroke, or charged batteries, as the manual says. None.
Noise and protection Eye protection always, hearing protection with gas, gloves, long pants, sturdy shoes. Eye protection, gloves and sturdy shoes are still sensible.
Buried lines Call 811 before every hole. Call 811 before every hole.
Storage Complete the full shutdown in the shutdown box below before storage. Store dry, out of children’s reach, with fuel stored as the manual says. Dry, wiped clean.

The table mentions storage, and storage is one of the points where a motor needs its full shutdown first. The shutdown box below applies every time the auger is cleared, serviced, moved, stored or left.

Shutdown Box

Shutdown before you clear or free the bit, change or attach the bit, free a stuck bit, adjust, check or add oil or fuel, clean, load, move, store or leave the auger. Never reach toward the bit while it turns, and never clear it or free it with the machine running. Corded electric auger: release the switch or trigger, wait until the bit has stopped completely, then unplug the auger from the outlet by the plug, not the cord. Before transport or storage, also let the motor cool. Battery auger: release the switch or trigger, wait until the bit has stopped completely, then remove the battery, and the switch key where your model has one, and keep it away from the auger. Gas auger: release the throttle, trigger or control, turn the engine off, wait until the bit and every moving part have stopped completely, then disconnect the spark plug wire (a spark plug cap on some makes) and secure it away from the plug. Let the engine and muffler cool before you touch the bit or anything near the exhaust. Only then free a stuck bit or clear wrapped material, using only the method your manual specifies (gloves do not make grabbing sharp wire or cutting edges safe), and check the bit and guards for damage. Do not handle unidentified wire, cables or pipes. Do not use reverse or run the engine or motor to back the bit out unless your manual expressly authorizes it for this task, with both hands on the designated handles and everyone clear of the bit; complete the full shutdown again before any further hands-on work. Add every step your manual gives, in its order, and refit every guard and shield before you restart.

How Many Holes Are You Digging?

The count of holes is the first thing I check, because the motor only pays for itself when it removes a lot of repeated effort. The ground comes second, and it can overrule the count.

A Few Holes

For a replacement tree, a young tree stake or a single post, I reach for the hand tool. Carrying a power head, a fuel can or a battery out of the shed is extra work for one hole, and a motor adds a safety routine to every hole. Extension services also ask for the call to 811 before any planting hole, so even this small job has a first step before the blades go in. My comparison of an earth auger vs shovel looks at the same choice for yard projects.

A gate post is the job that changes my mind, because it is the heavier post and the deeper hole. Penn State Extension gives about 36 inches for a typical line post and about 48 inches for corner and gate posts on a horse fence, set deeper in sandy or chronically wet soil. Those are fence depths for that use, not a rule for every post.

A Row of Posts

Take an example: two gate posts at about 48 inches and four line posts at about 36 inches make six holes, and no two are alike in the ground. By hand, all six holes mean repeated driving and lifting with your arms, back and legs. With a power head the motor turns the bit, and each of the six holes gives it a chance to meet a root.

Check the exact model’s stated applications, bit sizes and soil limits against your job. When a job goes past them, with many holes, large bits, hard clay or rock, ask a professional or rent a larger machine that comes with its own manual. Either way, finish the 811 process first, and where a buried service’s location is still uncertain, do not dig with any auger.

Rocky, Clay and Hard Ground

Ground decides more than the tool does. Every printed maximum depth and bit size assumes a bit that can turn, and hard ground takes that assumption away.

What Stops a Powered Bit

The Echo EA-400 and EA-500 manual warns that the auger may twist suddenly and forcefully if it contacts large rocks, roots or other hidden obstacles, and tells the operator to release the throttle trigger immediately and lift the auger out. The Powermate PEA438.1 manual describes a kick back violent enough to propel the unit, or the operator, in any direction. The Ryobi RY40701 and EGO EG0800E manuals tell the operator to stop, lift the auger from the hole and find another place to dig when a large obstruction stops it. After any bind, complete the full shutdown in the shutdown box above and inspect the bit and guards before you restart.

Near the hedgerow, where old roots run, I treat every hole as a possible bind. The EGO EG0800E and Makita DG001G manuals add that in clay you should not try to dig at once: lift the machine up and down so the loose soil can leave the hole, and dig in small steps.

Ground to Avoid

Do not dig in frozen or rock-hard ground or in ground full of roots and stones: the bit can bind and the machine can twist or kick.

What Stops a Hand Tool

This tool has no motor, so there is no powered torque reaction when a stone or a root stops the blades. The blades can still glance off a stone, so keep a firm stance and wear eye protection. You lift the blades out and decide whether to move the hole, and the work is slow when the ground fights you for every inch.

Safety: What a Motor Adds

A hand tool and an earth auger share the buried-line risk, and the auger adds the rest: a turning steel bit that can bind, catch clothing and kick the machine toward you, plus a gas engine’s exhaust. Read your own manual first, because makers differ on bystander distance, how to free a stuck bit and whether reverse is allowed. The sentences below are the floor, not a replacement for it.

Call 811 Before Every Hole

According to PHMSA, all states have one-call centers, and the call is free. Damaging buried utilities is a recognized safety risk and a cost during excavation, and trained, careful locating cut utility strikes in a UK utility trial (1). I tell every reader to do this first, and I do not take it as optional for the small job.

Buried Lines

Contact 811 before digging and include every planned hole in the locate request. Wait the required state notice period and confirm responses from every notified utility, including markings or a clear/no-conflict response for the work area. Resolve missing or conflicting responses before digging. Follow state ticket-validity and tolerance-zone rules, preserve markings, and keep augers outside the required clearance area. Near marks, use careful hand digging or another locating method permitted by state rules and the utility; obey any stricter auger-manual prohibition. Arrange separate locating for private services that 811 does not cover (irrigation lines, cables). Do not dig where a service’s location remains uncertain, and do not treat a larger machine as a workaround. No source gives a safe augering depth above a buried service.

Protect Yourself and the Area

Digging with an auger is heavy, jarring work that twists your arms and back. Take breaks, stop when you are tired or your attention slips, and use the gloves your manual recommends. Wear hearing protection with gas engines: a review of agricultural and forestry workers found more hearing loss in people exposed to both vibration and noise than in people exposed to neither (2).

Protective Gear

Wear safety glasses with side shields or goggles meeting your manual’s specification, including ANSI Z87.1 where required, and add a face shield where required. Wear hearing protection with gas engines and wherever your manual requires it. Wear long pants and sturdy, closed footwear with secure traction, plus any additional protection your manual specifies. Tie back long hair, remove jewelry and secure drawstrings; do not wear loose clothing or loose gloves. Use the gloves specified for the task and keep hair, clothing, gloves, hands and feet away from moving parts.

Clear the Area

Before you start, walk the spot and remove rocks, sticks, wire, hose, stakes and anything else the bit could catch or throw. Identify irrigation lines, drip lines, cables and sprinkler heads before you start, and take loose garden hoses out of the work area. Do not handle or move unidentified cables, pipes or utility lines: keep the auger away from them and contact the utility if their location is uncertain.

Bystanders and Slopes

Keep children, pets and other people out of the work area and at least the distance specified in your exact manual. Stop if anyone enters that area. If your manual gives no number, keep everyone well clear of the work area as it directs, and stop if anyone approaches. No distance makes a work area safe on its own: keep watching it. On a slope or uneven ground, slow down, keep firm footing and follow only the slope or footing rule in your own manual. If your manual gives no such instruction, obtain guidance from the manufacturer before using the auger on a slope.

When the Bit Binds or Sticks

Only the power head can twist, and the first defense is a firm stance and both hands on the designated handles. I respect the twisting force, because a bit that stops turns the whole machine toward you. A lab study of simulated torque reactions found very high wrist muscle activity even when the torque pulses were short and low compared with a person’s maximum strength (3). The study used small fastening-tool profiles, not augers, so it supports the general point and nothing more.

Binding and Torque Reaction

If the bit hits a root, a rock or a buried object, it can bind and the machine can twist or kick. Keep firm, balanced footing and hold the designated handles with both hands. Keep hands and feet away from the bit; never grasp or brace the bit or shaft. Never wrap the power cord around your hand, arm or body. Release the throttle or trigger immediately if the bit binds or control is threatened, then complete the full shutdown in the shutdown box and inspect for damage before restarting. Use reverse only where your manual authorizes it for your model.

Stuck Bit

If the bit sticks in the hole or material wraps around it, do not force it and do not reach for the bit. Stop and complete the full shutdown in the shutdown box before touching or inspecting it. Use only the freeing or clearing method specified in your exact manual; gloves do not make grabbing sharp wire or cutting edges safe. Do not handle unidentified wire, cables or pipes. Powered reverse is permitted only when your manual expressly authorizes it for that task, with both hands on the designated handles and everyone clear of the bit. Complete the full shutdown again before any subsequent hands-on work. If your manual gives no procedure, obtain manufacturer or qualified service guidance.

Gas Exhaust

A gas auger makes carbon monoxide. A case series of fatal poisonings tied to small engines found them in poorly ventilated spaces (4), so the shed and the garage are the places not to start one.

Carbon Monoxide

Never start or run a gas auger indoors or in a garage or shed, even with the doors open. Start and run it outdoors: the exhaust contains deadly carbon monoxide, which has no color, taste or smell. Allow the muffler and engine to cool before touching them.

Effort, Body Strain and Who Each Tool Suits

Effort is the reason people buy a motor, and it is also the thing the motor changes the least honestly. The motor turns the bit, and you still lift, guide and brace the machine. Neither tool is free of strain, so match the strain to your body and the job.

Strain From Digging by Hand

This tool asks for repeated lifting and driving with the legs, back and arms. It suits someone who works in short bursts and stops when tired. The load comes from your own effort, with no motor torque behind it.

Strain From a Power Head

A power head turns the bit, but you still lift, guide and control the machine, and the handles push back. An assembly-plant study found that predicted handle reaction force was greater on jobs where upper limb injuries were reported than on jobs with none (5). Those were pneumatic nutrunners, not augers, so I use the study for the principle that a handle that pushes back is the thing to respect. Railway maintenance workers using powered hand tools frequently reported vibration-related symptoms (6), again a different tool and different workers, which is a reason to take breaks.

Fuel, Charging and Upkeep Against a Tool With No Engine

The hand tool asks for almost nothing after the job, and a motor asks for routine. If you do not want upkeep, that difference alone can decide it.

  • Gas 2-stroke: the Echo EA-400 and EA-500, Powermate PEA438.1 and Champion 200940 manuals call for a 50:1 gasoline to 2-cycle oil mix, and Powermate and Champion warn against mixing fuel in the unit’s tank. I mix only in a separate can, the way the manuals say. If gas suits you, my roundup of five gas earth augers compares them for fence and garden post holes.
  • Gas 4-stroke: The Champion 201092 4-stroke auger has its own oil sump, so it takes engine oil rather than a mix. My guide to 2-stroke and 4-stroke earth augers compares fuel, oil, weight and upkeep.
  • Battery: charge and store the batteries as the battery manual says, and keep the charger dry. If you want an electric model, my roundup of electric post hole diggers lists nine picks for home digging.
  • The bit: a cracked, bent or dull bit is a hazard, and the Ryobi RY40701, EGO EG0800E, Powermate PEA438.1 and Makita DG001G manuals all say to replace a damaged one.
  • Hand tool: wipe the soil off the blades and store it dry.

Refuelling and Battery

Before refuelling, complete the full gas shutdown in the shutdown box. Refuel outdoors on the ground, not in a truck or trailer, with the engine cooled. Follow your exact manual’s precautions for ignition sources, filling the tank and dealing with spilled fuel. Mix fuel and oil only as the exact manual says. Use only manufacturer-approved batteries and chargers for the exact model. Before changing a battery or doing hands-on work, complete the full shutdown in the shutdown box. Keep the switch off and fingers off the trigger when installing a battery. Do not use damaged or modified batteries or chargers. Protect loose battery terminals from contact with metal objects. Follow the battery and charger manuals for moisture exposure, charging temperature, cooling and storage.

Corded Models

Use an outdoor extension cord that meets your exact manual’s requirements for gauge, length, plug type and grounding. Keep the cord away from the bit, never carry the auger by the cord, and never use it in the rain. Follow your exact manual’s instructions for cord routing, disconnecting the plug, keeping connections dry and GFCI protection.

Moving the Auger

Before you lift, load, carry or move the auger, complete the full shutdown in the shutdown box. Load and unload only as your manual describes, never carry the auger by its cord, and refuel a gas unit on the ground, not in the truck bed. Follow the manual’s lifting and handling instructions.

Picking the Right Digging Tool for Your Holes

Both tools earn their place on the same property, so the choice belongs to the job and not to a loyalty. Use these lists as a quick filter. If you decide on a power model, my roundup of seven post hole diggers compares corded, battery and gas picks for home fence jobs.

Choose an Earth Auger If

  • You have a line of posts in ground a bit can turn through.
  • You can follow the full 811 process and the shutdown routine every time.
  • You are comfortable with fuel or charging, a firm stance and both hands on the handles. My guide to battery vs gas earth auger choices helps you settle that.

Choose a Manual Post Hole Digger If

  • You have a single hole or a handful of holes.
  • The soil is workable and you want to stay out of a motor’s torque reaction.
  • You want no fuel, no charging and no motor.

Skip any auger in frozen or rock-hard ground. If a buried service’s location is uncertain, do not dig with any tool until every utility response is resolved. For a job beyond your exact machine’s stated limits, a professional or a larger rented machine with its own manual is the next step, once the site is cleared.

Before you buy or rent anything, count the holes, read your manual’s soil and depth limits, and get the 811 request in. My tip is to walk the line with a marker and have the 811 flags in place before you touch either tool. Settle those three facts and the earth auger vs manual post hole digger decision for your yard is made. When you are ready to buy, my roundup of the best earth auger models puts gas, corded and battery side by side.

Frequently Asked Questions

How to dig fence post holes by hand?

Dig fence post holes by hand with a manual post hole digger driven in, spread and lifted out, once the 811 marks are in place. Penn State Extension gives about 36 inches for a typical line post and about 48 inches for corner and gate posts on a horse fence, set deeper in sandy or wet soil. Move the hole if the blades keep striking a stone or a root.

How to use a manual post hole digger?

A manual post hole digger works by driving the two blades into the ground, spreading the handles to grip the soil and lifting the load out. Call 811 first and wear eye protection, gloves and sturdy shoes. The tool has no engine or battery, but it can still strike a buried line.

How to dig post holes through tree roots?

Digging post holes through tree roots is best avoided with a power auger, because the Echo EA-400 and EA-500 manual warns that the auger may twist suddenly and forcefully if it contacts roots or other hidden obstacles. The Ryobi RY40701 and EGO EG0800E manuals tell the operator to stop, lift the auger out and find another place to dig, after the full shutdown in the shutdown box above.

How to dig post holes in hard ground?

Digging post holes in hard ground raises the chance that a powered bit binds, so do not use an earth auger in frozen or rock-hard ground or in ground full of roots and stones. The EGO EG0800E and Makita DG001G manuals say to dig in small steps in clay, lifting the machine up and down so loose soil can leave the hole. A hole in ground that hard is a job for a larger rented machine with its own manual or a professional.

Do manual augers work well?

Manual augers are hand-turned bits, a different tool from the two-handled clamshell digger, and how well they work depends on the ground and the number of holes. With no motor they have no powered torque reaction, but stones and roots still stop any bit. Call 811 before the first hole, and for a long line of holes ask a professional about a powered tool or a larger machine.

References

  1. Gallagher AG, Hart M, Cleary D, et al. Proficiency based progression simulation training significantly reduces utility strikes: a prospective, randomized and blinded study. PLoS One. 2020;15(5):e0231979.
  2. Thaper R, Sesek R, Garnett R, Acosta-Sojo Y, Purdy GT. The combined impact of hand-arm vibration and noise exposure on hearing sensitivity of agricultural/forestry workers: a systematic literature review. Int J Environ Res Public Health. 2023;20(5):4276.
  3. Armstrong T, Bir C, Foulke J, Martin B, Finsen L, Sjogaard G. Muscle responses to simulated torque reactions of hand-held power tools. Ergonomics. 1999;42(1):146-159.
  4. Hyson BE, Friedman BM, Spear B, Bishop-Freeman SC. Lethal carbon monoxide generated from small internal combustion engines. J Anal Toxicol. 2024;48(8):625-629.
  5. Ku CH, Radwin RG, Karsh BT. Power hand tool kinetics associated with upper limb injuries in an automobile assembly plant. J Occup Environ Hyg. 2007;4(6):391-399.
  6. Johanning E, Stillo M, Landsbergis P. Powered-hand tools and vibration-related disorders in US-railway maintenance-of-way workers. Ind Health. 2020;58(6):539-553.

Safety Note: Only an adult who has read the manual and understands the controls should use an earth auger or post hole digger, never a child or anyone tired or impaired. Use the number of people your manual specifies, and keep everyone else out of the work area. The rotating bit can catch hair, clothing and gloves, and it can bind on a root, a rock or a buried object: the machine can then twist or kick in your hands. Stand with firm, balanced footing and hold the designated handles with both hands. Keep hands and feet away from the bit; never grasp or brace the bit or shaft. Never wrap the power cord around your hand, arm or body. If utility contact or a gas leak is suspected, stop work immediately. Do not touch, inspect, free or move the auger or exposed service, and do not attempt the normal hands-on shutdown or disconnect electrical connections in the suspected leak area. Leave the area, keep others away and contact the utility from a safe location; call 911 for a suspected gas leak or immediate danger. Otherwise, release the throttle or trigger immediately if the bit binds or control is threatened, then follow the shutdown procedure. On a two-person unit, both operators must understand the controls and agree on start and stop signals before starting; stop whenever either operator calls stop. Use reverse only where your manual expressly authorizes it. Never touch or clear the bit while it turns. Before you clear or free the bit, change or attach the bit, adjust, check or add oil or fuel, clean, load, move, store or leave the auger, complete the shutdown for its power type. Corded electric: release the switch or trigger, wait until the bit has stopped completely, then unplug it from the outlet by the plug, not the cord; before transport or storage, also let the motor cool. Battery: release the switch or trigger, wait until the bit has stopped completely, then remove the battery, and the switch key where the model has one. Gas: release the throttle, trigger or control, turn the engine off, wait until the bit and every moving part have stopped completely, then disconnect the spark plug wire and secure it away from the plug, and let the engine and muffler cool before touching the bit, engine, muffler or anything near the exhaust. For a drill-driven bit or any attachment system, follow the shutdown instructions in both the bit or attachment manual and the power-head or drill manual. If the bit sticks or material wraps around it, stop and complete the full shutdown before touching or inspecting it. Use only the freeing or clearing method specified in the exact manual; gloves do not make grabbing sharp wire or cutting edges safe. Do not handle unidentified wire, cables or pipes. Powered reverse is permitted only when the exact manual expressly authorizes it for that task, with both hands on the designated handles and everyone clear of the bit. Complete the full shutdown again before any subsequent hands-on work. Wear safety glasses with side shields or goggles meeting the manual’s specification, including ANSI Z87.1 where required; add a face shield where required. Wear hearing protection with gas engines and wherever the manual requires it. Wear long pants and sturdy, closed footwear with secure traction, plus any additional footwear protection the manual specifies. Tie back long hair, remove jewelry and secure drawstrings; do not wear loose clothing or loose gloves. Use the gloves specified for the task and keep them, clothing, hair, hands and feet away from moving parts. Contact 811 before digging and include every planned hole in the locate request. Wait the required state notice period and confirm that every notified utility has responded with markings or a clear/no-conflict response for the work area. Resolve missing or conflicting responses before digging. Preserve the marks and follow your state’s ticket-validity and tolerance-zone rules. Keep the auger out of the required clearance area; near marks, use careful hand digging or another locating method permitted by state rules and the utility. Follow any stricter prohibition in the auger’s manual. Marks do not show a safe drilling depth. Arrange to locate private irrigation lines, cables and other services that 811 may not cover. If a line’s location remains uncertain, do not dig there. Do not handle or move unidentified cables, pipes or utility lines. Before you start, remove rocks, sticks, wire and loose hoses, and identify irrigation lines, drip lines and sprinkler heads. Keep children, pets and other people out of the work area and at least the distance your exact manual specifies. Stop if anyone enters that area. If your manual gives no number, keep everyone well clear of the work area as it directs. No single distance is safe for every auger. On a slope or uneven ground, slow down, keep firm footing and follow only your manual’s rule. Do not dig in frozen or rock-hard ground. Before refuelling, complete the full gas shutdown described above. Refuel outdoors on the ground, not in a truck or trailer, with the engine cooled. Keep fuel away from smoking, flames, sparks and other ignition sources. Use an approved fuel container, avoid overfilling, secure the cap and follow the manual’s spill-cleanup and restart-location instructions; do not start with a fuel leak. Use the specified fuel and oil arrangement for that engine. Never start or run a gas auger indoors, in a garage or shed, or in an enclosed or poorly ventilated area, even with doors open. Operate outdoors where exhaust cannot accumulate or enter occupied spaces through doors, windows or air intakes. Exhaust contains deadly carbon monoxide. For a corded auger, inspect the cord and extension cord before use and do not use damaged cords or plugs. Use an outdoor extension cord meeting the exact manual’s gauge, length, plug and grounding requirements, and follow its GFCI instructions. Keep connections dry and the cord clear of the bit, heat, oil and sharp edges. Never carry the auger by its cord or wrap the cord around your body. Do not use it in rain or wet conditions prohibited by the manual. Use only manufacturer-approved batteries and chargers for the exact model. Complete the battery shutdown before removing or changing a battery, and keep the switch off and fingers off the trigger when installing one. Do not use damaged or modified batteries or chargers. Keep loose battery terminals away from metal objects, and follow the battery and charger manuals for moisture exposure, charging temperature, cooling and storage. Load and unload only as your manual describes, and store the auger dry and out of children’s reach. Take breaks and stop when you are tired.

Scroll to Top