Push spreader vs tow behind spreader comes down to what moves the hopper: you walk behind a push spreader, and a lawn tractor or similar vehicle pulls a tow behind spreader. That one change sets where you stand, how you work the gate and which manuals you must read first. In large-scale production, I verified seed drill calibration on weighing trays and checked sprayer nozzle output with calibration cylinders, so I trust a printed figure only as far as the manual backs it. Below I compare two Agri-Fab models, four more push models, the safety steps and the jobs each form fits.
Push Spreader vs Tow Behind Spreader: The Short Answer
A push broadcast spreader is a hopper on two wheels with a handle, and the wheels turn the plate as you walk. A tow behind spreader is a wheeled hopper with a hitch, and a vehicle replaces your legs. Both Agri-Fab models in this guide are ground-driven, so neither has a motor or a battery. My answer to “what a push spreader is” describes the parts and the types.
I recommend you choose by three printed facts: the hopper pounds, the vehicle you already own and the product label. Choose a push spreader if you work on foot and have no tow vehicle. Choose a tow-behind spreader if you already own a vehicle with a hitch and want to work from the seat. If you stay on foot, my best push spreader picks compare seven walk-behind models by frame and wheels.
Key Takeaway
The vehicle is the real change. A tow-behind spreader adds a towing vehicle’s owner’s manual, a hitch, slopes and a seated operator to every job, and a push spreader adds none of them.
What Each Spreader Type Is
This guide compares the push broadcast spreader with the tow-behind broadcast spreader, both rotary designs: a gate lets product fall onto a spinning plate that throws it out in a fan. The difference sits in the frame around that plate. A push drop spreader works differently and is outside this comparison, and my guide to broadcast and drop spreaders covers that difference.
The Push Broadcast Spreader
According to Agri-Fab’s manual, the Agri-Fab push spreader 45-0462 has a T-handle with a control lever, a numbered gauge and an adjustable stop, and the lever works a flow plate in the bottom of the hopper. The wheels drive the gears under the hopper, so the plate turns only while you walk. A push broadcast spreader like this one suits a person who wants to stay on foot and keep the gate within arm’s reach. I give my verdict on this 130 lb model in my Agri-Fab 45-0462 push spreader review.
The Tow Behind Broadcast Spreader
The Agri-Fab 45-0463 uses the same rotary idea on a hitch. A tow behind broadcast spreader of this kind has an axle and gear assembly that turns the impeller, and a steel rod and control arm that open and close the flow plate from the vehicle seat, according to the manual. The manual’s own words for the drive are that the drive wheel and large gear positions, in relation to the small gear, determine which direction the impeller spins. I follow the wheel, the gears and the hitch step by step in “how a tow-behind spreader works”.
Printed Figures of Real Models Side by Side
The cleanest comparison is one maker’s two models. Agri-Fab prints a 130 lb hopper for both its push and its tow-behind spreader, so the table below shows what the form changes when the hopper does not. I compare the 45-0463 with the 45-0462 in my Agri-Fab tow behind spreader comparison.
| Row | Agri-Fab 45-0462 push | Agri-Fab 45-0463 tow-behind |
|---|---|---|
| Hopper, maker’s figure | 130 lb | 130 lb |
| Spread width, maker’s chart ceiling | Up to 12 ft | Up to 12 ft |
| Gate control | Lever and numbered gauge on the handle, adjustable stop | Control arm and steel rod from the vehicle seat, adjustable stop, locking notch for off |
| Wheels, maker’s figure | 13 x 4 in pneumatic tires | 13 x 4 in pneumatic tires |
| Power source | None, ground-driven | None, ground-driven |
| Assembly | 16 steps: hammer, pliers, two 7/16 in wrenches | 17 steps: hammer, pliers, two 7/16 in and two 1/2 in wrenches |
| Household warranty | 3 years, 90 days if used commercially | 3 years, 90 days if used commercially |
| Weight | Not listed | Not listed |
The warranty sheets exclude wheels and bearings in years 2 and 3 on both models, and the tow-behind sheet also excludes the hopper bearing and plastic gearboxes in those years. Read the width as a ceiling: Agri-Fab’s chart prints narrower widths for some materials. I explain how swath, effective width and pass spacing relate in what spread width means.
Why the Label Decides the Amount
Every spreader setting in a chart is a starting point, and the number never comes from the spreader alone. Kentucky Extension says the bag’s information is a good starting point for calibration because spreaders can differ significantly (1).
Rates and Settings
The product label gives the application directions, so read it before you set the gate. A setting listed for your exact spreader and product is a starting point, not proof of the amount delivered: follow the spreader’s manual and calibrate for the product, the spreader and the person using it before you apply. Never exceed the label’s application rate.
Read the Label
Read the product label before you open the bag. Follow its directions for the permitted use, the application amount, protective equipment, weather, watering in, access by people and pets, storage and disposal. Using a registered pesticide in a way its label does not allow is against federal law. Follow the spreader’s manual too. If the product’s instructions and the spreader’s instructions cannot both be followed, do not use that combination; ask the manufacturers for guidance.
Hopper Size and Refills
A bigger printed hopper means fewer refills of the same product, and every refill is a hands-on job, so the safe-state box comes first. I recommend you read it before you buy either form.
Safe-State Box
Stop and make safe before you fill or unload the hopper, reach into the hopper, clear a clog, clean or rinse the spreader, lubricate it, adjust the gate or the pattern, change a part, hitch or unhitch it, move it, store it or leave it. Keep your hands, feet, hair and loose clothing away from the impeller, the plate, the agitator, the gears and the wheels while anything can turn. During normal spreading, walk or drive only as your manual and the product label permit; walking behind a push spreader, or pulling a tow-behind unit at the speed its manual describes, is operation, not transport. Walk-behind or hand-crank spreader: close the gate, then stop walking or cranking, and wait until the impeller, plate, agitator and wheels have stopped turning. Tow-behind spreader: close the gate, stop the vehicle, set the parking brake, switch the engine off and remove the key as the vehicle’s manual says, and wait until the wheels, impeller and agitator have stopped turning, before you reach into the hopper or touch the impeller. Keep the gate closed while you fill. Wear all the protective equipment the product label and your manual require while you fill, clean or clear a jam. Clear a clog only with the method in your exact manual. Follow every applicable safety step in your manual, in the order it specifies. Refit every guard and cover, and check that the gate opens and closes before product goes back in.
| Model | Form | Hopper capacity |
|---|---|---|
| EarthWay 2600A-Plus | Push | 40 lb |
| EarthWay 2150 | Push | 50 lb |
| Brinly P20-500BHDF-A | Push | 50 lb |
| Chapin 8400C | Push | 100 lb |
| Agri-Fab 45-0462 | Push | 130 lb |
| Agri-Fab 45-0463 | Tow-behind | 130 lb |
The push models run from 40 lb to 130 lb, and the one tow-behind model matches the largest push hopper. I cover the 40 lb model in my EarthWay 2600A-Plus push spreader review.
Filling
Before you fill or unload the hopper, complete the stop and make-safe steps for your spreader in the safe-state box, and keep the gate closed. For fertilizer, fill on a hard surface where spilled granules can be swept up, away from drains and water. Follow the product label’s handling and ventilation directions, and wear all the protective equipment the label and your manual require. Fill only to the level your manual allows, and secure the hopper cover or lid if your spreader has one. Keep children and pets away, and never leave a filled spreader where they can reach it.
A push fertilizer spreader follows the same fill rule as a tow-behind unit, and neither Agri-Fab manual prints a level to fill to. Hopper capacity is the maker’s printed figure, never a target and never what any lawn will take. I cover the materials, the capacity and the care of the hopper in what a spreader hopper is.
Protective Equipment
Wear all the protective equipment the product label and your spreader’s manual require, and put it on before you open the bag. Wear it every time you fill the hopper, clean the spreader or clear a clog. Protective equipment lowers your exposure; it does not make handling a lawn product safe.
The manuals add their own lines. Agri-Fab says to wear eye and hand protection when handling and applying lawn or garden chemicals, and its 45-0463 manual says never to operate the tractor and spreader without substantial footwear. Brinly says to always wear eye protection when operating the P20-500BHDF-A, to wear substantial footwear and long trousers and to avoid loose clothing that can catch in moving parts.
Gate Control and Pace
Both forms open the gate while you are moving and close it before you stop or turn. What differs is who sets the pace and where your hand is when you work the gate. I explain the hopper, the gate, the spinner and the throw in “how a broadcast spreader works”.
Opening and Closing the Gate
On the push model, Agri-Fab’s manual says to start the spreader in motion and then pull the control lever forward against the adjustable stop to the on position. It also says to move the lever to off before turning or stopping. On the tow-behind model the manual says to always start the tractor in motion before opening the flow plate and to close it before turning or stopping the tractor. NC State Extension gives the same order for walk-behind rotary units (2). It adds that only one wheel generally drives the impeller, so spreading through a turn changes the pattern (3).
Gate at Stops and Turns
Close the gate before you stop, before you slow down to turn, and whenever you pause, and open it again only after you are walking or driving at the steady pace your manual describes. Do not spread while you turn.
What Sets the Pace
On a push spreader, you set the pace, and Brinly’s manual for its P20-500BHDF-A says the fan speed follows the speed at which you operate it. On the Agri-Fab 45-0463 the vehicle sets it, and the manual says to begin with the transmission in first (low) gear and the engine at low speed, then increase speed gradually as conditions permit. Agri-Fab prints a maximum towing speed of 6 mph for that model and says higher speeds may cause excessive wear of the spreader gears. My Brinly P20 push spreader review covers the 50 lb model with its side deflector.
Speed also changes how much product leaves the hopper. A laboratory test of one ground-driven rotary turf spreader found that the application rate changed with travel speed (4), and Agri-Fab’s manual says a variation in speed requires an adjustment of the flow rate. I recommend you hold one steady pace for the whole job and let the manual’s setting, the label and your own calibration do the rest.
Hitching the Towing Vehicle and Slopes
This is the part a push spreader does not have. Before you fill, hitch, unhitch, reach into the hopper or touch the impeller, complete the tow-behind steps in the safe-state box above. I recommend you open the vehicle’s owner’s manual before the spreader’s, because every rule here rests on it. My answer to “what a tow-behind spreader is” lists the parts and the hitching basics.
Hitching a Tow Behind Spreader for Lawn Tractor Use
Agri-Fab’s manual starts assembly with the hitch: a hitch tube and a hitch bracket joined by a hitch pin that a hairpin cotter secures. The manual does not name the receiving hitch type of a vehicle, and it tells you to read the towing vehicle’s owner’s manual and to know how to operate your tractor before using the spreader. Ohio State’s mowing safety manual and Rutgers Extension’s farm machinery fact sheet give general hitching and slope guidance, but they are written for mowing and for farm tractors and trucks, so I treat them as a pointer back to the owner’s manual of your own vehicle.
Slopes, Ditches and Riders
Agri-Fab’s manual says vehicle braking and stability may be affected by an attachment, to be aware of changing conditions on slopes, to refer to the vehicle manual’s slope rules and to stay off steep slopes. It adds that you should not drive too close to a creek or ditch and should watch for holes. Drainage ditches border my property, so I read that line twice. Neither Agri-Fab manual prints a slope angle, and I do not give one.
Tow-Behind Rules
Follow your towing vehicle’s owner’s manual and the spreader’s own manual for hitching, turning, slopes, speed and load limits, and stay within the tow capacity in the vehicle’s owner’s manual. Never ride on a spreader or carry a passenger on it. Turn only as the two manuals direct, and keep children and pets well clear of the vehicle and the spreader while you load, hitch and spread. Before you fill, hitch, unhitch, reach into the hopper or touch the impeller, complete the tow-behind steps in the safe-state box.
Spills, Cleaning and Storage for Either Type
Each task here puts a hand near the hopper, the gate or the gears, so complete the stop and make-safe steps in the safe-state box above first. The label’s and the manual’s words decide the details.
Spills
Keep people and pets away from a spill. Follow the product label and its safety data sheet for collecting, reusing and disposing of spilled product, and wear the protective equipment they require. Never hose or wash granules into a street, a gutter, a drain, a ditch or water, and do not pile spilled product onto the lawn or return contaminated material to the bag. If you cannot manage the spill safely, stay away and call the emergency number on the label. Call Poison Control at 1-800-222-1222 if anyone is exposed, and call 911 for a fire or immediate danger.
Runoff From Hard Surfaces
A rotary spreader throws granules wider than its body, so some land on a path or driveway. UC IPM says to fill the spreader over a driveway or other hard area where spilled material can be swept up, and to keep fertilizer out of storm drains (5). Purdue advises maintaining a vegetative buffer strip of about 10 feet around surface water, a figure that varies by state and local rules, and says never to apply to drought-stressed, dormant or frozen turf (6). I cover the parts, the forms and safe use of a rotary model in what a broadcast spreader is.
Runoff
Keep fertilizer off pavement and out of drains and surface water. If scattered plain fertilizer lands on a sidewalk, a driveway or a patio, sweep it back onto the lawn before you water, without going over the label rate; collect a concentrated spill instead. For pesticide granules, follow the label’s cleanup instructions. Follow any buffer requirement that applies and keep fertilizer out of those areas. EPA advises against fertilizing before windy or rainy days, and Purdue advises against fertilizing drought-stressed, dormant or frozen turf. Follow the product’s weather and watering directions too.
Hygiene for Pesticide Products
Wash your hands before eating, drinking, smoking or using the restroom when you work with pesticides. Change your clothes and wash your hands immediately after you apply a product that contains a pesticide, and follow the label’s additional washing and clothing instructions.
Dust and Clogs
Never push, kick or dig product out of the gate or off the plate while anything can turn. If product clumps or bridges in the hopper or the gate clogs, stop and complete the stop and make-safe steps in the safe-state box first, then clear it only with the method in your manual.
Children, Pets and Others
Keep children, pets and other people away from the area while you fill and spread, and keep them off the treated area for as long as the label says. Store the bag and the filled spreader where they cannot reach them.
Cleaning and Storage
Both Agri-Fab manuals say to rinse the inside of the hopper and the exterior of the spreader and let it dry before storing, and to store it in a clean, dry area. NC State Extension adds that you should dry the spreader completely to prevent rusting and lubricate it as the owner’s manual specifies (3). The gear lines in both manuals are hands-on work: they have you remove three clips, separate the gearbox housings and apply grease and oil as the manual directs, so the safe-state box comes first.
Cleaning
Before you clean the spreader, complete the stop and make-safe steps in the safe-state box, and wear the protective equipment the product label and your manual require. Handle leftover product, cleaning water and residues as the product label directs. Clean the spreader only by a method both the label and the manual permit, and rinse it only where they permit it, keeping product and contaminated wash water out of drains and water supplies. Dry the spreader completely, and lubricate it as its manual directs. If you change products, follow both products’ cleaning requirements: a rinse alone does not show that all residue is gone.
Storage
Before you store the spreader, complete the stop and make-safe steps in the safe-state box. Store it empty, clean and dry, as your manual describes, with the gate closed. Keep products in their original labeled containers, securely closed, under the storage conditions their labels give, and away from children and pets. Lock pesticides away, apart from fertilizer, food and animal feed, and never put any product into a food or drink container. Store a battery as the battery manual describes.
Exposure
If someone swallows or is exposed to a lawn product, follow the first-aid section of the product label and call Poison Control (America’s Poison Centers) at 1-800-222-1222, and keep the product label with you. Call 911 in an emergency.
Assembly, Care and Warranty Terms
The push model takes 16 assembly steps and the tow-behind model takes 17, and both start with a hammer and pliers. The extra steps on a tow behind fertilizer spreader like this one come from the hitch and the longer control rod. Agri-Fab’s manuals say not to tighten completely on most early steps and to check that the flow plate opens and closes all the way before the first use. I cover the 130 lb tow-behind model in my Agri-Fab 45-0463 spreader review.
Both manuals tell you to check tire inflation before each use and not to inflate beyond the maximum printed on the tire. An optional vinyl hopper cover is a separate purchase for both models, and the tow-behind manual says it works as a wind and moisture shield but should not be used as a rain cover. Agri-Fab’s manuals also do not recommend powdered lawn chemicals, because they make a satisfactory or consistent broadcast pattern hard to get.
Warranty terms vary by maker. Agri-Fab prints 3 years for household use on both models, while EarthWay’s current manuals print one year for the 2600A-Plus (February 2025 edition) and for the 2150 (October 2024 edition). I read a warranty line for its wear-part exclusions before its headline term. I set the two EarthWay push models side by side in EarthWay 2600A against the 2150.
Which One Fits Your Job
The right form follows the job and the vehicle. My house lawn and the alleys between my plum and apricot rows are different jobs, and I pick the form for the job and not for the hopper figure.
Choose a Push Spreader If
- You work on foot: a push lawn spreader keeps the gate under your hand and needs no vehicle.
- You have no tow vehicle: the vehicle’s owner’s manual is the only thing a push spreader does not require.
- You want a smaller hopper: the push models in the table print 40 lb to 130 lb.
Choose a Tow Behind Spreader If
- You already own a vehicle with a hitch: a tow behind lawn spreader needs your owner’s manual and the spreader’s manual to agree.
- You want to work from a seat: the Agri-Fab tow behind spreader opens and closes its flow plate from the vehicle seat.
- You accept the extra rules: hitching, slopes, riders and ditches become part of every job.
Where a product label forbids a use, no spreader is the answer, and no bigger spreader fixes it. Separately, when a job outgrows a push spreader, check the vehicle and the hitch before you count on a bigger load, because the printed hopper of the tow-behind model matches the largest push hopper. For a bigger lot, my roundup of spreaders for a large lawn sorts push and tow-behind models by hopper size.
Match the Spreader to the Job
Three things to remember. The label sets the amount, the manuals set the limits and the safe-state box comes before every hands-on step.
My tip is to read both manuals at the kitchen table before the first fill, and to find the gate lines first. Once you know where the gate lever or arm sits, read the safety steps. Settle the push spreader vs tow behind spreader question by the vehicle you own and the job in front of you. My roundup of the best broadcast spreaders lists push, tow-behind and handheld models side by side.
Frequently Asked Questions
What is the difference between a push spreader and a tow behind spreader?
A push spreader is a hopper you walk behind, and a tow behind spreader is a wheeled hopper that a lawn tractor or similar vehicle pulls. Both Agri-Fab models in this guide are ground-driven with no motor, so the difference is who sets the pace and which manuals apply, and for the tow-behind that includes the vehicle’s owner’s manual.
Which is better, a push spreader or a tow behind spreader?
A push spreader is the better choice if you work on foot, and a tow behind spreader is the better choice if you already own a vehicle with a hitch and want to work from the seat. Agri-Fab prints the same 130 lb hopper for both of its models, so the hopper rarely decides it. The vehicle and the extra rules of towing do.
Do you need a hitch for a tow behind spreader?
You need a hitch on your vehicle that works with the spreader’s hitch, and both manuals set the details. The Agri-Fab 45-0463 comes with a hitch tube, a hitch bracket and a hitch pin secured with a hairpin cotter, according to its manual. A push spreader needs no hitch because you walk behind it.
Can you ride on a tow behind spreader?
You should never ride on a tow behind spreader or carry a passenger on it. Agri-Fab’s manual for the 45-0463 says not to allow anyone to ride or sit on the spreader frame. Keep children and pets well clear of the vehicle and the spreader while you load, hitch and spread.
Can a tow behind spreader be used on a slope?
A tow behind spreader can be used on a slope only as the vehicle’s owner’s manual and the spreader’s manual allow. Agri-Fab’s manual for the 45-0463 says an attachment may affect vehicle braking and stability and says to stay off steep slopes. It prints no slope angle, so follow the vehicle’s manual and do not set a limit of your own.
References
- Munshaw G. Calibrating Fertilizer Spreaders for the Home Lawn. AGR-211. University of Kentucky Cooperative Extension Service; 2014.
- Buhler W, Erickson E, Bruneau A, et al. The Calibration of Turfgrass Boom Sprayers and Spreaders. AG-628. North Carolina Cooperative Extension; 2001, reviewed 2024.
- Miller G, Kerns JP, Billeisen T. Organic Lawn Care: Composting and Spreaders. AG-562. NC State Extension; 2026.
- Parish RL. The effect of speed on performance of a rotary spreader for turf. Appl Eng Agric. 1987;3(1):17-19.
- UC Statewide Integrated Pest Management Program. How to apply fertilizer. In: UC Guide to Healthy Lawns. University of California Agriculture and Natural Resources; 2017.
- Bigelow CA, Tudor WT, Nemitz JR. Facts About Phosphorus and Lawns. AY-334. Purdue University Extension.
Safety Note: Read the product label and your spreader’s manual before handling product. Follow both; if their instructions cannot both be met, do not use that combination. Registered pesticide use must comply with its labeling. A listed spreader setting is a starting point; calibrate as the manual directs and never exceed the label rate. Wear all protective equipment required by the label and manual before opening the container and during filling, cleanup and jam clearing. Wash your hands before eating, drinking, smoking or using the restroom when working with pesticides. After application, change your clothes and wash your hands immediately, and follow the label’s additional washing and clothing instructions. Keep children, pets and other people away during handling and application and off treated areas for as long as the label requires. Emergency first: if a battery becomes unusually hot, swells, hisses, smells unusual or smokes, stop using the spreader without handling or removing the battery. Keep people away and follow the battery manual’s emergency instructions. If it smokes, burns or presents immediate danger, move away and call 911 or the fire department. Otherwise, complete the applicable stop and make-safe sequence before filling, unloading, reaching into the hopper, clearing a jam, cleaning, lubricating, adjusting, changing parts or batteries, hitching, unhitching, transporting, storing or leaving the spreader. Walk-behind or hand-crank: close the gate, stop walking or cranking, and wait for all moving parts to stop. Tow-behind: close the gate, stop the vehicle, set the parking brake, switch off the engine and remove the key as the vehicle manual directs, and wait for the wheels, impeller and agitator to stop before reaching into the hopper or touching the impeller. Battery spreader: release the trigger or close the gate, switch off, wait for moving parts to stop, then remove the battery as the manual directs and keep it away while working. Follow any additional isolation steps in the exact manual. Keep hands, feet, hair and loose clothing away from moving parts. Clear jams only by the manual’s method. Refit guards and covers and check the gate before refilling. With the spreader made safe and the gate closed, fill fertilizer on a hard surface where spills can be collected, away from drains and water. Follow the label’s handling and ventilation directions and the manual’s fill limit. Keep people and pets away from spills. Follow the label and safety data sheet for collection, reuse and disposal; do not spread concentrated spills onto the lawn or return contaminated product to its bag. Sweep scattered plain fertilizer from pavement onto the intended lawn before watering only without exceeding the label rate. Follow the label’s cleanup instructions for pesticide granules. Never wash product into streets, gutters, drains, ditches or water. Observe applicable buffers. EPA advises against fertilizing before windy or rainy days; Purdue advises against fertilizing drought-stressed, dormant or frozen turf. Close the gate before stopping or turning, as the manual directs. Follow both towing manuals for hitching, turning, slopes, speed and load limits; never ride on the spreader or carry passengers on it. Use only batteries specified for the model. Recharge rechargeable batteries only with a charger approved for them, as the manual directs; never recharge disposable cells. After completing the applicable shutdown, handle leftover product, cleaning water and residues according to the product label. Clean only by methods permitted by both label and manual, keeping contaminated water out of drains and water supplies. Rinse only if permitted, then dry and lubricate as directed. A rinse does not establish that all pesticide residue is gone. Use salt or ice melt only when the product directions and spreader manual permit it. Salt-based deicers can damage metal; follow the model’s cleaning instructions. Do not use lawn fertilizer to melt ice. Store the spreader empty, clean and dry as its manual directs. Keep products securely closed in their original labeled containers under their labels’ storage conditions, away from children and pets. Lock pesticides away, separate from fertilizer, food and feed; never use food or drink containers. For human exposure, follow the label’s first-aid instructions, call Poison Control at 1-800-222-1222 and keep the label available. Call 911 for immediate danger.

