A man using a handheld crank spreader to spread granules on a small garden lawn

What Is a Handheld Spreader? How It Works and Which Kind to Pick

A handheld spreader is a small hopper with a spinner plate under it that you carry in your hands or on a strap, and a hand crank or a battery motor turns the plate to throw seed, fertilizer or ice melt. In large-scale production, I verified seed drill calibration on weighing trays and checked sprayer nozzle output with calibration cylinders, so I read a spreader the way I read those machines: by what the controls really do. Below I explain how it works, its parts, the crank, chest-mount and battery forms, what the makers allow in the hopper, and the safety steps that come before every fill.

What Is a Handheld Spreader?

A handheld spreader is a carried hopper for granular product, with a gate that opens it and a spinner plate that throws what falls through. You hold it or wear it and walk the area yourself, so the models in this article have no wheels and no engine. A hand crank or a battery motor turns the plate, and that one fact sorts almost every model: a crank model asks for your arm, and a battery model asks for a charged pack.

Most are handheld broadcast spreaders, which means the plate throws product out in a fan in front of you. Brinly calls its 5 lb model a “rotary broadcast” design, and SOLO describes its 421 as a portable chest-mount spreader. Wolf and Smith, who studied hand-operated spinner spreaders in 1979, describe them as widely used for seeding and fertilizing small fields, lawns and gardens (1). I explain the broadcast design, its parts and its different forms in my guide to what a broadcast spreader is.

The hopper holds little: SOLO prints 20 lb for the 421, and Brinly prints 5 lb, or half a gallon, for its handheld granular spreader. I recommend a small spreader of this kind for beds, patches, edges and small lawns, and I leave larger lawns to a wheeled spreader, which carries its own weight and spares your arm. I compare hand, battery and push models to find the best small lawn spreaders.

How a Handheld Spreader Works

The order of work is the same on every model: product goes in, the gate opens, product falls onto a spinning plate, and the plate throws it. What changes from model to model is who turns the plate. Filling is the first hands-on step, so the full safe-state box comes first.

Safe-State Box

Emergency first, for a spreader with a battery: if a battery becomes unusually hot, swells, hisses, gives off an unusual odor or smokes, stop using the spreader without handling or removing the battery, keep people away and follow the battery manual’s emergency instructions; if it smokes, burns or presents immediate danger, move away and call 911 or the fire department without finishing the routine steps. Stop and make safe before you fill or unload the hopper, reach into the hopper, clear a clog, clean or rinse the spreader, lubricate it, adjust the gate or the pattern, change a part, hitch or unhitch it, charge or change a battery, move it, store it or leave it. Keep your hands, feet, hair and loose clothing away from the impeller, the plate, the agitator, the gears and the wheels while anything can turn. During normal spreading, walk or drive only as your manual and the product label permit; walking behind a push spreader, or pulling a tow-behind unit at the speed its manual describes, is operation, not transport. Walk-behind or hand-crank spreader: close the gate, then stop walking or cranking, and wait until the impeller, plate, agitator and wheels have stopped turning. Battery spreader: release the trigger or close the gate as your manual directs, switch the spreader off, wait until all moving parts have stopped, then remove the battery as the manual directs (on a model with a built-in battery that cannot be removed, such as the WORKPRO X, follow that manual’s own off and storage steps instead, and never open the battery compartment) and keep a removed battery away from the spreader while you work. Follow any additional isolation steps in the exact manual. Keep the gate closed while you fill. Wear all the protective equipment the product label and your manual require while you fill, clean or clear a jam. Clear a clog only with the method in your exact manual. Follow every applicable safety step in your manual, in the order it specifies. Refit every guard and cover, and check that the gate opens and closes before product goes back in.

The Sequence From Fill to Throw

Five steps cover every model. Each model’s own manual adds to them and takes precedence where it differs.

  1. Complete the safe-state steps above, then check that the gate is closed. Chapin’s manual for the 8700G says to make sure the gate is closed before filling the hopper, and the Scotts placard for the Whirl says to set the spreader over pavement when filling so spilled product can be swept up.
  2. Fill the hopper following the filling steps in the safety section below.
  3. Start walking and reach the pace your manual describes before you open the gate. NC State’s guide for walk-behind rotary spreaders says to start walking and reach the calibrated speed before opening the lever to release the material.
  4. Turn the plate and open the gate as your model’s manual directs. On the Whirl, the placard says to pull the trigger and turn the crank clockwise. On the WORX WG869, the manual says to press and hold the on/off trigger.
  5. Close the gate before you stop or turn, and only then stop cranking or release the trigger.

Who Turns the Plate

On a crank model, your hand drives a gear. SOLO’s manual for the 421 says each complete turn of the crank handle turns the impeller 7 1/2 times, and I read that as a reminder that the plate spins much faster than your hand. On a battery model, a motor does the turning, and the WORX manual lists a trigger and a speed-control dial for it. I go through the crank, strap and hopper in my full SOLO 421 spreader review.

Carry Position, Pace and the Setting

How you carry a handheld spreader changes what it throws. Wolf and Smith found the widest swath and the most uniform distribution when the spreader was carried with the spinner directly in front of the operator and the crank slightly to the right, and an uneven pattern with the spinner to the left and the crank in front (1). It was one design, tested in 1979, so I take the idea and not a figure: carry it the way the maker’s picture shows, and keep your pace steady.

Pace changes the amount. The Scotts placard for the Whirl prints that application rates may vary depending on crank and walking speed, and a laboratory study of a ground-driven rotary turf spreader found that its application rate changed significantly when speed changed (one material, one spreader) (2).

Gate at Stops and Turns

Close the gate before you stop, before you slow down to turn, and whenever you pause, and open it again only after you are walking or driving at the steady pace your manual describes. Do not spread while you turn.

Clemson and Kentucky extension both call the label setting a starting point and tell you to calibrate for each product. The bag’s label and the spreader maker’s setting chart decide the setting.

Rates and Settings

The product label gives the application directions, so read it before you set the gate. A setting listed for your exact spreader and product is a starting point, not proof of the amount delivered: follow the spreader’s manual and calibrate for the product, the spreader and the person using it before you apply. Never exceed the label’s application rate.

The Main Parts of a Handheld Spreader

Seven parts matter on a handheld fertilizer spreader, and the models differ mostly in how they build the gate and the drive. The table lists each part with a model whose maker prints it. I explain edge guards and side controls in my page on what a spreader deflector is.

Parts of a handheld spreader and where a named maker prints them
Part What it does Printed by
Hopper Holds the product SOLO 421, Brinly handheld and WORX WG869 print a capacity
Gate or flow control Opens and closes the path from hopper to plate SOLO: flow rate lever; Brinly: flow gate knob; Scotts Whirl: trigger and dial
Spinner plate Throws the product in a fan SOLO: impeller; WORX: spreader wheel
Crank or motor Turns the plate SOLO and Brinly: hand crank, Brinly with a long crank; WORX and WORKPRO: battery motor
Handle or strap Carries the unit SOLO: carry strap; Chapin 8700G: padded strap; Brinly: trigger handle
Agitator Stirs product at the bottom of the hopper SOLO: built-in agitator; WORX: agitator listed in the manual
Side baffle or deflector Limits or shapes the throw to one side SOLO: deflector shield; Chapin 8700G: side baffle; WORX: edge-control deflector

According to SOLO, its deflector shield increases or decreases the width of spread, and its directional lever sets the throw to center, left or right. WORX’s manual says to set the spreading width with the speed-control dial and the edge-control deflector. These are the makers’ descriptions, and the result on your ground is yours to check.

I look at the gate first on any spec sheet. SOLO’s manual marks zero as closed, and the 8700G’s gate lever drops into a slot while a spring closes it when you flip the lever up. A gate with a clear closed position is the one I trust at the end of a pass.

Types of Handheld Spreaders

Handheld spreaders come in three working forms: a hand-crank unit you hold, a chest-mount unit you wear, and a battery unit with a motor. The table sets out what the makers print for four of them, and each weight keeps its own basis, so do not read across the weight column. I compare the printed specifications of Whirl and Brinly handheld spreaders for readers choosing a hand-crank model.

Handheld spreaders as the makers print them
Model Form Power Hopper Weight, maker’s figure and basis
Brinly 5 lb HHS3-5BH Hand crank with trigger None, hand crank 5 lb, or half a gallon Not listed
SOLO 421 Chest-mount, hand crank None, hand crank 20 lb 5.5 lb empty, from the manual
WORX WG869 kit Battery handheld 20V Max lithium-ion pack and charger in the box 0.9 gallon tub 2.27 lb bare tool, from the manual; about 3.1 lb with the battery, from the maker’s page
WORKPRO X Battery handheld Built-in 7.2 V lithium-ion pack, USB-C charging 2.5 L 2.62 lb, from the manual, with the built-in pack

Hand-Crank Handhelds

A hand-crank handheld has the simplest drive: one hand holds the handle with the trigger, the other turns the crank. The Scotts Whirl has an orange crank, a trigger and an orange dial, and Brinly’s handheld has an extra-long crank and a flow gate worked by a knob. Brinly prints a spread width of up to 5 feet, which is the maker’s ceiling and not a result to expect on your ground.

On the Whirl, the crank hand does the work and the other hand steadies the handle and works the trigger, and that matches the carry Wolf and Smith describe. I keep a hand-crank unit to small areas because the cranking arm does all the work. I discuss the model’s specifications and limits in my Scotts Whirl hand-powered review.

Chest-Mount Handhelds

A chest-mount spreader hangs from a strap so both hands are free for the crank and the gate. SOLO’s 421 arrives with the crank handle and carry strap inside the hopper, and its manual says to attach them before use. SOLO’s manual also says to keep hands away from the rotating impeller. Chapin’s 8700G needs its crank fitted, and the manual names a 14 mm wrench for it.

I recommend a chest-mount spreader when the area is a long strip or a field edge that a push spreader cannot reach, because the strap carries the weight and your wrist does not. For a spreader you wear while cranking, I compare SOLO 421 and Chapin 8700G.

Battery Handhelds

A battery powered hand spreader swaps the crank for a motor and a battery, and the battery brings its own rules. The WORX WG869 kit comes with a 2.0 Ah battery and a 2 A charger. According to WORX’s manual, the rated voltage is 20 V Max, the pack is lithium-ion, and the ambient range for use and storage of the tool and the battery is 32 to 113 degrees Fahrenheit. Check that range before you take any battery spreader onto a freezing walk. The WORKPRO X has a built-in pack that charges over USB-C, and its manual says it is not possible to work with the battery while it is charging. I weigh the motor against the crank in my side-by-side of battery powered and handheld spreaders.

Before you charge or change any battery, complete the steps in the safe-state box. WORKPRO’s manual says to charge only from a 5 V DC USB supply, in a well-ventilated area away from flammable materials, and not to leave the battery and charger unsupervised. It also says to protect the charging device from moisture, not to use it in the open, and not to charge below 4 degrees Celsius or above 40 degrees Celsius. WORX’s manual has its own lines: charge only with the charger it specifies, and keep the battery clean and dry.

Both manuals rule out rain. WORX says not to use the tool in damp or wet locations or in rain, and to switch the trigger off before filling. WORKPRO says not to expose the product to rain or wet conditions. Before any adjusting, cleaning, servicing or transporting, complete the stop and make-safe steps for a battery spreader in the safe-state box, including the emergency exception; the WORKPRO battery cannot come out, so that model’s own off and storage steps apply.

Battery Spreader

Use only the batteries the maker specifies for your exact spreader, and charge, store and handle them only as your manual describes. Recharge rechargeable batteries only with a charger the manual approves, and never recharge disposable cells. Before you fill the hopper, clear a jam, clean the spreader or change the battery, follow the emergency exception and the applicable stop and make-safe steps in the safe-state box. Lithium-ion batteries can overheat and catch fire (thermal runaway), so do not use a damaged battery or charger. If a battery becomes unusually hot, swells, hisses, gives off an unusual odor or smokes, stop using it without handling or removing it, keep people away and follow the battery manual’s emergency instructions; if it smokes or burns, move away and call 911 or the fire department.

OSHA’s lithium-ion fact sheet lists following the manufacturer’s instructions for storage, use, charging and maintenance as a control, and it says these batteries can undergo thermal runaway, which can cause fire and explosion (3). A modelling review calls thermal runaway a recognized safety concern for lithium-ion batteries (4).

What You Can Put in a Handheld Spreader

The makers print which materials their spreaders are meant for, and the product’s own label adds its rules on top. Both apply, and when they cannot both be followed, you do not use that combination.

Read the Label

Read the product label before you open the bag. Follow its directions for the permitted use, the application amount, protective equipment, weather, watering in, access by people and pets, storage and disposal. Using a registered pesticide in a way its label does not allow is against federal law. Follow the spreader’s manual too. If the product’s instructions and the spreader’s instructions cannot both be followed, do not use that combination; ask the manufacturers for guidance.

Seed and Fertilizer

The WORX manual says the spreader is intended for spreading grass seeds, fertilizers, rock salt or de-icer outdoors, and SOLO’s manual lists seed and fertilizers among the materials it holds. Putting small seed on a bed or a patch is the job a handheld grass seed spreader suits. I compare the best spreaders for grass seed by spreader type, hopper size and budget.

A manual can also forbid a material. WORKPRO’s manual says the spreader must not be used for distributing chemicals, pesticides, herbicides, liquids or powder, and it names lawn seeds, agricultural fertilizers, animal feed, deicers and rock salts. That is the manual’s own restriction, so I treat that hopper as closed to granular weed products. If you plan to spread a lawn chemical, check that your exact spreader’s manual allows it.

Ice Melt and Salt

Several makers include ice melt in the list. The WORX and WORKPRO manuals both name de-icer or deicers, and SOLO’s manual lists ice melters and salt, while Chapin’s product page for the 8700G lists rock salt and sand among the materials it rules out. A handheld ice melt spreader is a model-by-model matter, and the manual of your exact model settles it. I rank seven models for driveways, walks and steps to name the best spreaders for ice melt.

Ice Melt and Salt

Use ice melt or salt only when both the product’s directions and your spreader’s manual permit it. Salt-based deicers can damage metal, so follow your model’s cleaning instructions after use. Before you clean the spreader, complete the stop and make-safe steps in the safe-state box. Rinse only if the manual permits it, and dry the spreader as the manual directs. Do not use lawn fertilizer to melt ice. Keep deicing products away from children and pets.

Safety Before You Fill or Spread

A hand spreader for lawn work carries two risks: the spreader and the product in the hopper. The spreader has a spinning plate, and the product has a label. Each callout below covers one step, and the stop and make-safe steps in the safe-state box come before all of them.

Protective Equipment

Wear all the protective equipment the product label and your spreader’s manual require, and put it on before you open the bag. Wear it every time you fill the hopper, clean the spreader or clear a clog. Protective equipment lowers your exposure; it does not make handling a lawn product safe.

The manuals add their own lines. SOLO’s manual says to wear safety glasses or eye shields, non-slip gloves, closed toed shoes with good traction, snug long-sleeved clothes and tightly cuffed or cuffless pants, to tie long hair back and to wear a respirator if appropriate for the material, and protective clothing, a respirator and eye protection when spreading chemicals. WORKPRO’s manual says to wear full eye and hearing protection, head protection where there is a risk of falling objects, heavy long trousers, boots and gloves, and eye protection and a face filter mask with fertilizers and dusty products. WORX’s manual recommends rubber gloves and substantial footwear outdoors, and says to use safety glasses and a face or dust mask if the work is dusty.

Filling

Before you fill or unload the hopper, complete the stop and make-safe steps for your spreader in the safe-state box, and keep the gate closed. For fertilizer, fill on a hard surface where spilled granules can be swept up, away from drains and water. Follow the product label’s handling and ventilation directions, and wear all the protective equipment the label and your manual require. Fill only to the level your manual allows, and secure the hopper cover or lid if your spreader has one. Keep children and pets away, and never leave a filled spreader where they can reach it.

The manuals add placement rules. SOLO says to set the 421 on a flat surface with the flow rate lever at zero and never to load the hopper while carrying the spreader, and WORKPRO says to place the spreader on a flat, stable surface.

Spills

Keep people and pets away from a spill. Follow the product label and its safety data sheet for collecting, reusing and disposing of spilled product, and wear the protective equipment they require. Never hose or wash granules into a street, a gutter, a drain, a ditch or water, and do not pile spilled product onto the lawn or return contaminated material to the bag. If you cannot manage the spill safely, stay away and call the emergency number on the label. Call Poison Control at 1-800-222-1222 if anyone is exposed, and call 911 for a fire or immediate danger.

Runoff and Hard Surfaces

Keep fertilizer off pavement and out of drains and surface water. If scattered plain fertilizer lands on a sidewalk, a driveway or a patio, sweep it back onto the lawn before you water, without going over the label rate; collect a concentrated spill instead. For pesticide granules, follow the label’s cleanup instructions. Follow any buffer requirement that applies and keep fertilizer out of those areas. EPA advises against fertilizing before windy or rainy days, and Purdue advises against fertilizing drought-stressed, dormant or frozen turf. Follow the product’s weather and watering directions too.

Children, Pets and Others

Keep children, pets and other people away from the area while you fill and spread, and keep them off the treated area for as long as the label says. Store the bag and the filled spreader where they cannot reach them.

Pesticide Products

Wash your hands before eating, drinking, smoking or using the restroom when you work with pesticides. Change your clothes and wash your hands immediately after you apply a product that contains a pesticide, and follow the label’s additional washing and clothing instructions.

If Someone Is Exposed

If someone swallows or is exposed to a lawn product, follow the first-aid section of the product label and call Poison Control at 1-800-222-1222, and keep the product label with you. Call 911 in an emergency.

Clogs

Never push, kick or dig product out of the gate or off the plate while anything can turn. If product clumps or bridges in the hopper or the gate clogs, stop and complete the stop and make-safe steps in the safe-state box first, then clear it only with the method in your manual.

Where a Handheld Spreader Fits

A handheld spreader fits the jobs a wheeled spreader reaches awkwardly: a vegetable plot, a bed, an edge, a bare patch, a short walk. A vegetable plot of a couple of thousand square feet is, in my view, the size a handheld suits best. Cover crops go between my orchard rows after the main growing season, and a handheld seed spreader fits seed work on a small strip like that.

The limit is the hopper and the arm. A wheeled spreader carries its own weight, so I recommend a push spreader for a full lawn and a handheld lawn spreader for the edges and beds around it. A short icy walk is another small job, and it suits a handheld only when the spreader’s manual allows ice melt. The more product a job needs, the more refills it takes, and every refill starts with the safe-state box. I set the two forms side by side in my breakdown of handheld and push spreaders.

Cleaning and Storing a Handheld Spreader

Leftover product and wet storage damage a fertilizer hand spreader as much as any other, and cleaning is hands-on work at the plate, so the safe-state box comes first. NC State Extension says to wash the spreader after each day’s use, dry it completely and lubricate it as the owner’s manual specifies, and fertilizer left in a spreader absorbs water and the spreader rusts, say the University of New Hampshire and Nebraska Extension. A laboratory study of rotary spreaders found that materials with insoluble parts build up on the impeller and gradually shift the pattern (5), which is one more reason to clean the plate.

Cleaning

Before you clean the spreader, complete the stop and make-safe steps in the safe-state box, and wear the protective equipment the product label and your manual require. Handle leftover product, cleaning water and residues as the product label directs. Clean the spreader only by a method both the label and the manual permit, and rinse it only where they permit it, keeping product and contaminated wash water out of drains and water supplies. Dry the spreader completely, and lubricate it as its manual directs. If you change products, follow both products’ cleaning requirements: a rinse alone does not show that all residue is gone.

The manuals differ, so follow yours. WORX says to wipe the tool clean with a dry cloth, and WORKPRO says not to use water to clean the spreader and to use a soft-bristled brush. I never assume that a hose is allowed on a battery spreader.

Storage

Before you store the spreader, complete the stop and make-safe steps in the safe-state box. Store it empty, clean and dry, as your manual describes, with the gate closed. Keep products in their original labeled containers, securely closed, under the storage conditions their labels give, and away from children and pets. Lock pesticides away, apart from fertilizer, food and animal feed, and never put any product into a food or drink container. Store a battery as the battery manual describes.

WORX says to store the tool in a secure, dry place out of the reach of children, and WORKPRO says to store it dry, clean, protected against dust and out of the reach of children.

Choose by the Job, Then by the Manual

Three things to remember. Pick the form by the job: a crank model for a bed or a patch, a chest-mount model for a longer strip, and a battery model when you want the motor and will look after the battery. Read the product label and the spreader manual before the first fill, and run the safe-state steps every time you touch the hopper, the plate or the battery. My own tip is to open and close the gate once, empty, before any product goes in. Next, read the manual of the exact model you plan to buy, because a handheld spreader is only as safe as the habits you bring to it. I rank seven crank and battery models for spot work to name the best handheld spreaders.

Frequently Asked Questions

What is a handheld spreader for lawn?

A handheld spreader for lawn use is a carried hopper with a spinner plate that throws seed or fertilizer over beds, patches and small lawns. A hand crank or a battery motor turns the plate. The product label and the spreader’s manual decide what it may spread and how.

What is a handheld seed spreader?

A handheld seed spreader puts seed on a small area, such as a bed, a bare patch or a cover crop strip. Makers such as WORX, WORKPRO and SOLO name seed among the materials their models hold. A setting on the maker’s chart is a starting point, so calibrate as the manual directs, and read the seed bag’s label before you apply.

What is a handheld broadcast spreader?

A handheld broadcast spreader is a carried spreader whose spinner plate throws product out in a fan in front of you. Brinly calls its 5 lb model a rotary broadcast design, and WORX describes its WG869 as a handheld broadcast spreader. A crank or a motor turns the plate.

What is a handheld salt spreader?

A handheld salt spreader spreads rock salt or ice melt on a short walk or step, where the maker’s manual allows it. SOLO, WORX and WORKPRO name salt or de-icer in their lists, and Chapin’s page for the 8700G rules rock salt out. Because salt-based deicers can damage metal, complete the stop and make-safe steps in the safe-state box before you clean it, and clean it only by a method both the product label and the manual permit.

How does a handheld spreader work?

A handheld spreader works by dropping product from the hopper through a gate onto a spinning plate that throws it out in a fan. A hand crank or a battery motor turns the plate, and you walk the area at a steady pace with the gate open. Close the gate before you stop or turn.

References

  1. Wolf DD, Smith ES. Uniformity of seed and fertilizer distribution with a hand-operated spinning spreader. Trans ASAE. 1979;22(4):761-762.
  2. Parish RL. The effect of speed on performance of a rotary spreader for turf. Appl Eng Agric. 1987;3(1):17-19.
  3. Occupational Safety and Health Administration. Lithium-ion Battery Safety. Fact Sheet DTSEM FS-4480. US Department of Labor; January 2025.
  4. Wang G, Ping P, Kong D, et al. Advances and challenges in thermal runaway modeling of lithium-ion batteries. Innovation (Camb). 2024;5(4):100624.
  5. Parish RL. The effect of relative humidity on rotary turf spreader patterns. Appl Eng Agric. 1991;7(5):541-544.

Safety Note: Read the product label and your spreader’s manual before handling product. Follow both; if their instructions cannot both be met, do not use that combination. Registered pesticide use must comply with its labeling. A listed spreader setting is a starting point; calibrate as the manual directs and never exceed the label rate. Wear all protective equipment required by the label and manual before opening the container and during filling, cleanup and jam clearing. Wash your hands before eating, drinking, smoking or using the restroom when working with pesticides. After application, change your clothes and wash your hands immediately, and follow the label’s additional washing and clothing instructions. Keep children, pets and other people away during handling and application and off treated areas for as long as the label requires. Emergency first: if a battery becomes unusually hot, swells, hisses, smells unusual or smokes, stop using the spreader without handling or removing the battery. Keep people away and follow the battery manual’s emergency instructions. If it smokes, burns or presents immediate danger, move away and call 911 or the fire department. Otherwise, complete the applicable stop and make-safe sequence before filling, unloading, reaching into the hopper, clearing a jam, cleaning, lubricating, adjusting, changing parts or batteries, hitching, unhitching, transporting, storing or leaving the spreader. Walk-behind or hand-crank: close the gate, stop walking or cranking, and wait for all moving parts to stop. Tow-behind: close the gate, stop the vehicle, set the parking brake, switch off the engine and remove the key as the vehicle manual directs, and wait for the wheels, impeller and agitator to stop before reaching into the hopper or touching the impeller. Battery spreader: release the trigger or close the gate, switch off, wait for moving parts to stop, then remove the battery as the manual directs and keep it away while working. Follow any additional isolation steps in the exact manual. Keep hands, feet, hair and loose clothing away from moving parts. Clear jams only by the manual’s method. Refit guards and covers and check the gate before refilling. With the spreader made safe and the gate closed, fill fertilizer on a hard surface where spills can be collected, away from drains and water. Follow the label’s handling and ventilation directions and the manual’s fill limit. Keep people and pets away from spills. Follow the label and safety data sheet for collection, reuse and disposal; do not spread concentrated spills onto the lawn or return contaminated product to its bag. Sweep scattered plain fertilizer from pavement onto the intended lawn before watering only without exceeding the label rate. Follow the label’s cleanup instructions for pesticide granules. Never wash product into streets, gutters, drains, ditches or water. Observe applicable buffers. EPA advises against fertilizing before windy or rainy days; Purdue advises against fertilizing drought-stressed, dormant or frozen turf. Close the gate before stopping or turning, as the manual directs. Follow both towing manuals for hitching, turning, slopes, speed and load limits; never ride on the spreader or carry passengers on it. Use only batteries specified for the model. Recharge rechargeable batteries only with a charger approved for them, as the manual directs; never recharge disposable cells. After completing the applicable shutdown, handle leftover product, cleaning water and residues according to the product label. Clean only by methods permitted by both label and manual, keeping contaminated water out of drains and water supplies. Rinse only if permitted, then dry and lubricate as directed. A rinse does not establish that all pesticide residue is gone. Use salt or ice melt only when the product directions and spreader manual permit it. Salt-based deicers can damage metal; follow the model’s cleaning instructions. Do not use lawn fertilizer to melt ice. Store the spreader empty, clean and dry as its manual directs. Keep products securely closed in their original labeled containers under their labels’ storage conditions, away from children and pets. Lock pesticides away, separate from fertilizer, food and feed; never use food or drink containers. For human exposure, follow the label’s first-aid instructions, call Poison Control at 1-800-222-1222 and keep the label available. Call 911 for immediate danger.

Scroll to Top