Never point a pressure washer at a person, a pet or your own hands and feet, and never spray it at outlets, wiring, the machine itself or a flammable liquid. Maker manuals and safety agencies add hot water, fragile surfaces, older painted surfaces and old treated decks to that list, each for its own reason. My plant protection training taught me to read the warnings on a label before the dosage, so I read a washer’s danger box before its spec table. Your own manual sets every pressure, nozzle and distance.
What Should You Never Pressure Wash? The Short List
Nine items make the list, and each one traces to a maker’s printed warning or an agency page. The first six are prohibitions: where the stream must never point and what must never go through the washer. The last three are warnings about particular surfaces, from plants and glass to old paint and old decks.
- People: the Westinghouse and Simpson manuals tell you never to aim the stream at a person.
- Pets and other animals: the Westinghouse and Simpson manuals list animals next to people.
- Your own hands and feet: Westinghouse says the spray can cause blindness or blast holes in the skin.
- Outlets, wiring and electrical fixtures: Kärcher, Sun Joe and CRAFTSMAN print the warning, and the Consumer Product Safety Commission (CPSC) has warned about fatal shock since 1983.
- The machine itself: Westinghouse and CRAFTSMAN say never to spray the washer.
- Flammable liquids: Westinghouse and Simpson say never to spray them or wash with them.
- Fragile surfaces and plants: Simpson says the spray can damage plants, wood, glass, automobile paint, trim and delicate objects.
- Loose or older painted surfaces: Kärcher warns that the spray may remove loose paint, and the Environmental Protection Agency (EPA) sets containment rules for lead paint work.
- A deck built with older CCA-treated wood (chromated copper arsenate): a University of Florida study found that cleaning such a deck released arsenic.
People, Pets and Your Own Hands and Feet
The spray is the hazard, so the first rule is where it points. The Westinghouse WPX3200 manual puts the rule in a danger box: “DO NOT direct discharge stream at persons, animals, electrical devices, or the machine itself.” The ePX3500 manual from the same maker says “NEVER spray directly at a person, animal, electrical device, or the unit itself,” and adds that the washer can break glass if hit with direct contact.
What the Manuals Add
The Simpson PowerShot PS3228 manual says the high pressure of a washer can cause fluid injection injuries to human and animal flesh, severe lacerations, amputations and death, and it tells the operator never to place hands in front of the nozzle. The Westinghouse ePX3500 manual says not to touch the spray with your fingers, hands or feet, because the spray can cause blindness or blast holes in the skin. A 2004 safety note from University of California Agriculture and Natural Resources says the same in two lines: never point the wand at another person, and keep hands and feet away from the nozzle.
I rinse my boots with the garden hose, because rinsing a boot under the spray puts a foot exactly where the manuals say it must never be. The nozzle end of a pressure washer hose is the edge of a tool, and I treat it the way I treat a blade.
What the Injury Reports Show
The manuals are blunt because the medical reports are. A case report of a pressure washer injection injury says such injuries can lead to infection and compartment syndrome and, in some cases, amputation (1). Emergency department data from the United States list pressure washers as the most common source of hand injection injuries (2). One reported case was a finger hurt at a car wash: the X-ray showed no fracture, yet the finger needed emergency decompression surgery (3).
The eyes are at risk too. A case series of patients who came to the emergency department after using pressure washers describes open and blunt-sharp eye injuries, all treated surgically, with poor final vision in all of them (4). CDC explains why these injuries are easy to underrate: the strong spray can cause serious wounds that might first appear minor. If someone is hit by the stream, get medical care without delay, even if the wound looks small.
Gear, Grip and Bystanders
Wear safety glasses or goggles and closed footwear when you operate the washer, and put them on before you start; where your manual requires goggles, side shields or a face shield, that requirement replaces the minimum here. Follow the manual’s additional protective-equipment requirements, including hearing protection where the manual requires it, and the detergent label’s requirements when you handle detergent. Keep your hands and feet away from the spray. Protective equipment does not make contact with the stream safe.
Engage the trigger lock on the spray gun whenever you stop spraying, even for a moment, before you set the gun down, and before you walk away or change position. Disengage the lock only for controlled spraying or for the manual’s pressure-relief procedure, with the gun pointed in a safe direction. Hold and brace the spray gun as your manual instructs, keep firm footing on a surface that is not slippery, and follow your manual’s warning about the push of the gun when you squeeze the trigger. Start the stream away from your feet and from anyone else, and never swing the gun toward people or pets as you turn.
Never at Skin or Eyes
Never point the spray at yourself, another person, a pet or any part of the body. Keep your hands and feet away from the nozzle and the stream. Get medical care without delay for a spray wound, even if it looks minor at first. Tell the clinician that a pressure washer caused the injury.
Keep children, pets and other people away from the work area while the machine runs, and never let a child use the machine. Store the washer and its battery or fuel where children cannot reach them.
Electrical Outlets, Wiring and the Machine Itself
Water and mains power make a bad pair, and the manuals say so in plain lines. The Kärcher K1700 Cube manual says “Do not spray electrical connections, electrical outlets or fixtures.” The Sun Joe SPX3000 manual says “Do not spray electrical apparatus and wiring.” The CRAFTSMAN CMEPW2100 manual says “Water spray must never be directed towards any electric wiring or directly towards the pressure washer machine itself or fatal electric shock may occur.” I cover Kärcher’s foot-pedal electric washer in my K1700 Cube review.
The washer is on the list too. The Westinghouse WPX3200 manual says never to spray in the direction of or near a power source or electrical outlet, and its danger box names the machine itself among the things the stream must not hit. When I look at a wall I plan to wash, I look for outlets, light fixtures and wiring first, because the rule covers everything the stream can reach.
What CPSC and CDC Say
CPSC warned in 1983 of fatal electric shock from electrically powered pressure washers, and it advised a grounded outlet protected by a ground fault circuit interrupter, or GFCI. CDC repeats the GFCI point: test it first, and have an electrician check a unit that trips a breaker. The University of California note of 2004 adds that the spray belongs away from electric wiring, receptacles and junction boxes.
Corded Washers
Use the electrical supply and the GFCI protection your manual specifies, and test the GFCI before use according to its instructions. If the washer trips a GFCI or a circuit breaker while you use it, stop using it and have a qualified repair person examine it before you use it again; do not keep resetting it and carry on. Where the washer has a grounding prong, connect it to a properly grounded receptacle and never remove the prong. Never cut or splice a power cord or an extension cord. Wear closed, rubber-soled footwear that gives some electrical insulation, plus any additional footwear the manual requires; footwear does not replace GFCI protection or the other electrical precautions. Use an extension cord only if your manual permits it, and then only the type and length it names. Keep every plug and cord connection dry, out of standing water and away from runoff and the area you are washing, and keep the spray away from outlets, wiring and electrical equipment. Do not use a damaged cord or plug.
Flammable Liquids, Acids and Bleach
A washer pumps water, and the manuals keep other liquids out of the pump and away from the spray. The Westinghouse WPX3200 and ePX3500 manuals both say “NEVER spray flammable liquids.” Simpson’s manual for the Clean Machine line says not to attempt to pressure wash with volatile, flammable or corrosive liquids, and it says “NEVER use bleach.” I explain the pump, hose, gun and nozzle in my guide to how a pressure washer works.
What Each Maker Prints
The lines differ from one maker to the next, and none is a list for every washer. The table gives the words as each manual prints them.
| Manual | Line as printed |
|---|---|
| Westinghouse WPX3200 | “NEVER spray flammable liquids.” |
| Westinghouse ePX3500 | “NEVER spray flammable liquids.” and “Dish and laundry soap is too thick and will clog the nozzle of your detergent bottle.” |
| Simpson Clean Machine line | “do not attempt to pressure wash with volatile, flammable, or corrosive liquids, and NEVER use bleach.” |
The Westinghouse ePX3500 manual adds that you should use only a detergent formulated for pressure washers and follow the instructions on its label. I read the label of any liquid before it goes into a tank, a habit from plant protection work, where the label governs every step.
Detergent and Poison Control
Stop and Make Safe
Stop and make safe before you connect or disconnect a hose, change a nozzle, wand or accessory, clear a clogged nozzle, clean a filter, add detergent, refuel, check the oil, charge or change a battery, drain the washer, move it, store it or leave it. Release the trigger and engage the trigger lock on the spray gun. Gas washer: turn the engine off with its switch as the manual says and wait until all moving parts have stopped. Let the engine and the muffler cool for the time your manual gives before you refuel, store the washer or touch hot parts, and disconnect the spark plug wire before maintenance where your manual directs it. Corded electric washer: turn the washer off with its power switch and wait until all moving parts have stopped. Every washer, after the steps above for your type: follow your manual’s water-supply shutdown and pressure-relief procedure. Point the gun away from people, pets and electrical equipment at a discharge location your manual and the detergent label permit. Disengage the trigger lock, squeeze the trigger to relieve the trapped pressure as the manual directs, then engage the lock again. Then unplug a corded washer by the plug, not by the cord, with dry hands, or remove the battery from a battery washer as your manual directs and keep it away from the washer while you work. Do not disconnect hoses or change nozzles before the pressure is relieved. If the manual’s procedure does not release the pressure, stop and get service; do not loosen a fitting to release it. Only then disconnect hoses or change nozzles. Where your manual gives a different order for these steps, follow your manual’s order. Follow every applicable step in your manual, in the order it specifies, and check that every hose, fitting and nozzle is attached and undamaged before water or power goes back on.
Before you add detergent or connect or adjust a detergent accessory, complete the stop and make-safe steps in the safe-state box above. Use only the detergents your manual allows, through the detergent system the manual describes, and read the detergent label before you open it. Wear the protective equipment the detergent label requires, and avoid contact of detergent with your eyes and skin. Do not run a detergent that your manual does not name through the pump.
The University of California note adds that washer detergents can be caustic. If someone swallows a cleaning product or gets it in the eyes, follow the label’s first-aid section and call Poison Control (America’s Poison Centers) at 1-800-222-1222. Call 911 for a fire or immediate danger.
Plants, Glass, Wood, Paint and Delicate Objects
The Simpson PowerShot PS3228 manual carries a spray damage notice: “High-pressure spray can damage plants and other surfaces such as wood, glass, automobile paint, auto striping and trim, and delicate objects.” The same notice says to cover plants before spraying near them and to test surfaces before spraying. It also points the reader to the nozzle table in that manual, which is the place to look for your own model’s nozzle rules.
The Westinghouse WPX3200 manual says water under high pressure can damage fragile surfaces, and it tells the operator to practice on an inconspicuous test area first to learn when damage may occur. The Kärcher K1700 Cube manual has a painted surface warning: “If painted surfaces are peeling or chipping, use extreme caution as pressure washer may remove the loose paint from the surface.” I cover plants before any spray, a habit from plant protection work, and the Simpson notice says the same thing in one line.
Check both your washer’s manual and the care instructions of the surface or finish maker before you wash, and follow their restrictions. If they prohibit pressure washing, do not use a different nozzle or setting as a workaround. Any list of what not to pressure wash gives way to the manual and the surface maker’s care instructions. The maker’s wording for each material is laid out in my list of surfaces you can pressure wash.
Older Painted Surfaces and Lead
Older paint can contain lead, and the rules that apply to it are about containment. EPA’s Lead-Based Paint Program FAQ of January 2026 says pressure washing is not a prohibited practice under its Renovation, Repair and Painting rule, and that pressure washing falls under the same containment requirements as other permitted work practices. Under those requirements the firm must isolate the work area so that no dust or debris, including wastewater, leaves it while the work goes on.
EPA adds that wastewater from pressure washing needs proper disposal, and it tells readers to check with the local water treatment authority. The same FAQ says landscaping fabric does not count as an impermeable cover when power washing the exterior of a building.
Who the Rule Covers
EPA’s lead-safe work practices are written for contractors working in homes built before 1978 and in childcare facilities. EPA’s booklet for homeowners says lead dust can form when lead-based paint is scraped, sanded or heated. The Simpson manuals print a related line: “Exterior paints used before 1977 may contain lead and will produce chips that will need to be collected and disposed of at a hazardous waste facility.”
EPA and Simpson describe containment and collection, and the job for the reader is to follow them before the first spray. If your house dates from before 1978, read EPA’s lead pages and your local rules before you wash a painted surface. My view is that a painted surface of that age is a job for a certified firm, because the containment is most of the work. My guide to pressure washing a house takes the job from planning through cleanup.
Old CCA-Treated Decks and Wash Water
A University of Florida study tested three cleaning methods on wood from a 25-year-old deck built with CCA-treated lumber (wood treated with chromated copper arsenate), and it found that wet wood released more surface arsenic than dry wood and that bleach left hexavalent chromium on the surface and in the runoff (5). The methods tested were tap water, bleach and pressure washing, so the study does not single out the washer. According to the university’s news release, the rinse water carried arsenic and chromate above regulatory limits, and decks built before 2004 were often built with CCA wood. If your own deck is old wood, my guide to pressure washing a deck covers the wood risks and the checks before you start.
For a deck built with CCA wood, that means keeping the rinse water out of soil and drains, and keeping children and pets off wet old CCA wood. My rule is that this water never goes onto a vegetable bed or a lawn. The vegetable plot and the lawn are exactly where wash water ends up by default.
Where the Wash Water Goes
Before you wash, plan how to keep wash water, detergent and debris out of streets, storm drains, ditches and streams, because a storm drain carries what enters it to local waters without treatment. Check with your city or county stormwater office about collecting and disposing of the wash water for the job.
Send wash water to landscaping only where local rules and the detergent label permit it and the soil can absorb it without runoff or contamination. Otherwise contain and collect it for an approved disposal route. Do not assume that water carrying oil, paint debris, pesticide residue or material from an old treated deck is suitable for a lawn.
EPA’s vehicle-washing sheet says storm drains lead to local waterbodies and not to treatment facilities. The City of San Diego’s pressure washing fact sheet, which is a San Diego rule sheet, says to cover storm drains, sweep or vacuum dry debris first, and collect the wash water. Rules differ from one city or county to the next.
Ladders, Hot Water and Other Ways the Job Goes Wrong
Some mistakes concern what the machine is asked to do. Four of them appear in the manuals as flat prohibitions: a ladder, a hot water supply, a dry pump and a closed space for a gas engine.
A Ladder or an Unsteady Stand
The Simpson PowerShot PS3228 manual says “Do not overreach or stand on an unstable surface. Do not use pressure washer while standing on a ladder.” It gives the reason: the reactive force of the spray will cause the gun and wand to kick back and could cause the operator to slip or fall. The manual also says wet pavement can be slippery.
Do not use a pressure washer for a task at height, such as from a ladder, unless your manual expressly permits the equipment and the method. A ladder is the one point where I stop reading and just say no.
Hot Water and a Dry Pump
The Westinghouse WPX3200 manual says “Never connect your pressure washer to a hot water supply” and “ONLY use cold water.” The ePX3500 manual says “NEVER use hot water with your pressure washer.” Both manuals also rule out running the pump dry. I cover what the pressure washer and power washer names mean in a separate guide.
The WPX3200 manual says “NEVER run the unit dry. Be sure the water supply is completely turned on before operating the unit,” and the ePX3500 manual says running the pump dry will cause damage to the internal components.
Before you connect or disconnect a hose, complete the stop and make-safe steps for your pressure washer in the safe-state box above. Inspect the high-pressure hose, the spray gun and every fitting before each use, as your manual describes, and do not use a damaged part. Replace a damaged high-pressure hose; never repair or patch it.
Connect the hoses and turn on the water before you start the machine, and purge and start it in the order your manual specifies. On the drip system I built, the pump head sits behind a 150-mesh disc filter, and I check that water is flowing before the pump starts. I read a washer’s dry-run line the same way.
A Gas Engine in a Closed Space
Operate a gas pressure washer outdoors, never inside a building or a partly enclosed space. CDC says to keep it at least 20 feet from any window, door or vent, and your manual may set a stricter placement, which you follow. Engine exhaust contains carbon monoxide, which you cannot see or smell and which can kill. Opening a door or a window does not make it safe to run an engine inside.
If anyone develops symptoms such as headache, dizziness, weakness, nausea or confusion, move to fresh air and get emergency medical care.
Simpson’s manual for the Clean Machine line says never to use the washer inside a house, garage or any other kind of enclosure, even if doors and windows are open. The machinery shed on my land has a dirt-and-concrete floor, and a gas washer never runs in it.
What To Do Before the First Spray
Read the pressure washer’s manual before you connect water or power, and follow it. Its warnings, its operator rules and its steps for your exact model come before anything in this article. A short check before the first spray then covers every item above.
- Read the danger box and the spray damage notice in your manual.
- Look along the spray path for people, pets, outlets, wiring, light fixtures, plants and glass.
- Check whether the surface and its paint are older, and whether the surface maker’s care instructions allow pressure washing.
- Try an inconspicuous test area first if your manual says to.
- Plan where the wash water goes before any water leaves the machine.
- Put on safety glasses or goggles and closed footwear, plus anything else the manual requires; where it requires goggles, side shields or a face shield, that replaces the minimum.
- Complete the stop and make-safe steps in the safe-state box above before any hose, nozzle, detergent or storage work.
Here is the check on one real manual. The Westinghouse WPX3200 manual rules out persons, animals, electrical devices and the machine itself in its danger box, asks for a test area in its notice about fragile surfaces, and rules out a dry pump in its water line. My full verdict on that washer, with its onboard soap system, is in my Westinghouse WPX3200 review.
Keeping the Spray Where You Aim It
Three points carry the page. People, pets and electrical equipment stay out of the spray. The manual and the surface maker decide what liquids and surfaces the washer meets. Old paint and old treated decks call for containment of the chips and the wash water. For machines to buy, my roundup of pressure washers I recommend covers nine models across gas, electric and battery.
My tip is to keep the manual’s danger page in a clear sleeve with the machine, where the next person to use it will see it first. Knowing what never to pressure wash, and why, is the first part of using a pressure washer safely. Once that page is in hand, my walkthrough on how to use a pressure washer gives the order the manuals print.
Frequently Asked Questions
Can a pressure washer kill you?
A pressure washer can kill you through electric shock, through carbon monoxide from a gas engine run in a closed space, and through a spray injury that goes untreated. CPSC has warned of fatal shock from electric washers since 1983, and CDC says to keep a gas washer at least 20 feet from any window, door or vent.
Can a pressure washer cut you?
A pressure washer can cut you, and the wound can look minor at first. The Simpson PowerShot PS3228 manual lists severe lacerations among the injuries from high-pressure spray, and CDC says to get medical care without delay.
Can you pressure wash windows?
Pressure washing windows is a job to hold until your washer’s manual and the window maker’s care instructions both allow it. The Westinghouse ePX3500 manual says the washer can break glass if hit with direct contact, and the Simpson PowerShot PS3228 manual lists glass among the surfaces the spray can damage.
Can you use bleach in a pressure washer?
Bleach in a pressure washer is a question for your manual, and Simpson’s manual for the Clean Machine line says “NEVER use bleach.” The Westinghouse ePX3500 manual says to use only a detergent formulated for pressure washers and to follow its label.
Can you run a pressure washer without water?
A pressure washer must not run without water. The Westinghouse WPX3200 manual says “NEVER run the unit dry,” and the ePX3500 manual says running the pump dry will cause damage to the internal components.
References
- Funato N, Sugizaki Y, Ri Y, Ichibayashi R. High-pressure injection damage caused by a high-pressure washer. Cureus. 2024;16(1):e52498. doi:10.7759/cureus.52498
- Johnson C, Newton W, LaRochelle L, Allen J, Daly C. High-pressure injection injuries of the hand in community and industrial settings: incidence and trends. Hand (N Y). 2025;20(6):917-922. doi:10.1177/15589447231218404
- Choi JH, Choi SY, Hwang JH, Kim KS, Lee SY. Finger compartment syndrome due to a high-pressure washer injury: a case report. World J Clin Cases. 2023;11(13):3017-3021. doi:10.12998/wjcc.v11.i13.3017
- Placide J, Yang MY, Gross AW, Crowell EL. Case series: traumatic ocular lacerations secondary to pressure washers. Am J Ophthalmol Case Rep. 2022;27:101612. doi:10.1016/j.ajoc.2022.101612
- Gress J, de Oliveira LM, da Silva EB, et al. Cleaning-induced arsenic mobilization and chromium oxidation from CCA-wood deck: potential risk to children. Environ Int. 2015;82:35-40. doi:10.1016/j.envint.2015.04.012
Safety Note: Read your pressure washer’s manual before you connect water or power, and follow it. Never point the spray at yourself, another person, a pet or any part of the body. Keep hands and feet away from the nozzle and stream. Get medical care without delay for a spray wound, even if it looks minor at first. Tell the clinician that a pressure washer caused the injury. Wear safety glasses or goggles and closed footwear before operating the washer, plus any additional protection required by the manual and the detergent label. Follow the manual’s instructions for the trigger lock, grip, footing and recoil, and engage the trigger lock whenever you stop spraying. Use only the nozzles, accessories and detergents the manual permits, and never point any nozzle at skin, people or animals. Do not perform a task at height without instructions expressly permitting the equipment and method in the exact manual. Gas models: operate outdoors, never inside a building or a partly enclosed space. Keep the engine at least 20 feet from any window, door or vent, following CDC’s pressure washer guidance and any stricter manual requirement. Exhaust contains carbon monoxide, which cannot be seen or smelled and can kill. Opening doors or windows does not make indoor operation safe. Refuel only with the engine off and cool, following the manual. Corded models: use the manual’s specified electrical supply and GFCI protection, and test the GFCI before use according to its instructions. After an operating GFCI or breaker trip, do not reuse the washer until a qualified repair person has examined it. Where the washer has a grounding prong, connect it to a properly grounded receptacle and never remove the prong. Wear closed, rubber-soled footwear that provides some electrical insulation, plus any additional footwear required by the manual; footwear does not replace GFCI protection or the other electrical precautions. Never cut or splice cords. Use an extension cord only as the manual permits. Keep connections dry and away from runoff, standing water and the washing area, and keep spray away from electrical equipment. Battery models: use only the battery and charger the maker specifies for your exact model. Emergency first: if you notice an unusual odor, a change in color, too much heat, a change in shape, leaking or odd noises from a lithium-ion battery, stop using the washer and follow your battery manual’s emergency instructions. Otherwise, complete the applicable stop and make-safe procedure before hose, nozzle, wand or accessory work, clearing a blockage, cleaning, maintenance, refueling, checking oil, adding detergent, battery changes or charging, draining, moving, transporting, storing or leaving the washer. Follow your exact manual’s procedure and order. Release the trigger and engage its lock. Gas: switch the engine off and wait for it to stop; disconnect the spark plug wire before service as the manual directs, and let hot parts cool before refueling, storage or contact. Corded: switch off and unplug by the plug with dry hands. Battery: switch off, remove a removable battery as the manual directs and keep it away while working; for a built-in battery, follow the manual’s isolation procedure and do not open the battery compartment. Complete the manual’s water-supply shutdown and pressure-relief steps: point the gun in a safe direction at a permitted discharge location, disengage the trigger lock, squeeze the trigger as directed to relieve pressure, then reengage the lock. Do not disconnect hoses or change nozzles until pressure is relieved. If pressure cannot be relieved by the prescribed procedure, obtain service without loosening fittings. Refit and inspect parts before restoring water or power. Replace a damaged high-pressure hose; never repair or patch it. Before you wash, plan how to keep wash water, detergent and debris out of streets, storm drains, ditches and streams, and check with your city or county stormwater office about collection and disposal. Send wash water to landscaping only where local rules and the detergent label permit it and the soil can absorb it without runoff or contamination. Keep children and pets away, and never let a child use the machine. Drain and store the washer as its manual directs. For exposure to a cleaning product, follow the label’s first-aid instructions and call Poison Control at 1-800-222-1222. Call 911 for a fire or immediate danger.

